Abstract:The quasi-Z-source inverter (qZSI) has been widely explored for renewable energy applications due to its superiority, e.g., higher boosting ratio and operational reliability, which is attained by inserting shoot-through (ST) states. As a conventional space vector modulation (SVM) method for the three-phase qZSI, the ZSVM6 method is easy to implement by dividing the ST time into six identical intervals. However, the instantaneous inductor current ripples of the qZSI with the ZSVM6 strategy are affected by the operating conditions, e.g., modulation index m and ST duty ratio dsh. In this article, the instantaneous inductor current ripples and the maximum current ripple in the qZSI with the ZSVM6 strategy under all operational conditions are explored in detail. The operational conditions are categorized into several cases according to the relationship among the duty ratios of the active states, null states, and ST states. More importantly, an improved ZSVM6 strategy is proposed to reduce the inductor current ripple for the qZSI, in which the maximum inductor current ripple is limited by making full use of the operational states. The proposed ZSVM6 strategy keeps the total ST time in a switching cycle while maintaining the axis-symmetry feature of the inductor current, but reduces the current ripple. Simulations and experimental results confirm effectiveness of the proposal when compared with the conventional ZSVM6 strategy for ripple current reduction.

Novel MSVPWM to Reduce the Inductor Current Ripple for Z-Source Inverter in Electric Vehicle Applications

Generalized Space Vector Modulation for Ripple Current Reduction in Quasi-Z-Source Inverters

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Inductor Current Ripple Analysis and Reduction for Quasi-Z-Source Inverters With an Improved ZSVM6 Strategy

Current Ripple Reduction for the Quasi-Z-Source Inverter with Modified Space-Vector PWM Strategy

Impact of Space Vector Modulation Strategies on the Reliability of Impedance-Source Inverters

A New ZVCS Resonant Voltage-Fed Push-Pull Converter for Vehicle Inverter Application

A ZVS Grid-Connected Full-Bridge Inverter with a Novel ZVS SPWM Scheme

Hybrid Svpwm Technique for Reduced Torque Ripple in Permanent Magnet Synchronous Motor

A Novel SVPWM Control Strategy for Multiphase Dual Inverter for Electrical Vehicles

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Control Strategy for Open Winding PMSM System Supplied by the Z-source and Voltage Source Integrated Converters

Modified Synchronized SVPWM Strategies to Reduce CMV for Three-Phase VSIs at Low Switching Frequency

SVPWM Strategy of Dual Inverters and Zero-Sequence Voltage Suppression Method

Modified Single-Edge SVPWM Technique to Reduce the Switching Losses and Increase PWM Harmonics Frequency for Three-Phase VSIs

Novel SVPWM for Open Winding PMSM Drives With Simultaneous Common Mode Voltage Control and Full Frequency Zero Sequence Current Suppression

Torque ripple analysis and reduction of permanent magnet synchronous motor

An Improved Filter Inductor Design Strategy Based on Virtual Space Vector Modulation for Grid-Connected Three-Level Inverter

Hybrid Space Vector Modulation Strategy for Torque Ripple Minimization in Three-Phase Four-Switch Inverter-Fed PMSM Drives

Improved Vector Sequence Modulation Strategy for Suppressing Conducted EMI in Three-Phase PMSMs

A Novel SVPWM Scheme for Field-Oriented Vector-Controlled PMSM Drive System Fed by Cascaded H-Bridge Inverter