Abstract:Lithium-sulfur (Li-S) batteries are widely regarded as the next-generation energy storage technology, due to their high potential in energy density and a low projected cost. Practical applications of such batteries are plagued with radical challenges that mainly stem from two factors. First, both sulfur and its final lithiation product, Li2S, are insulating. Thus, the reaction kinetics is slow and often leads to a low attainable capacity. Second, active material dissolve in the electrolyte in the form of lithium polysulfides. This dissolution causes a series of problems, including loss of cathode materials by diffusion away from the cathode, collapse of the cathode structure, and the polysulfide shuttle effect. As a result, Li-S batteries commonly show fast capacity decay and low coulombic efficiency. Herein, we report the exceptional battery performance of porous carbon-sulfur composite microspheres, PSC-S, that benefited from simultaneous control of nanostructure and microscale particle morphology. The porous carbon microspheres (PSC) was synthesized as the sulfur host,by combining emulsion polymerization and evaporation-induced self-assembly (EISA) process, with a good control of both pore structure and microscale particle morphology. Such material not only demonstrated superioty in attainable capacity, but also in several other critical parameters for the development of high-energy Li-S batteries. PSC-S composite boasts a high tap density of 1.08 g/ml and contains 75 wt.% sulfur embedded into the mesopores of its carbon framework. At a high sulfur loading of 5 mg-S/cm2 and 60wt.% sulfur content in the electrode, this material delivers both high gravimetric and high volumetric capacity with excellent retention. Carbon nanotubes (CNTs) can also be readily incorporated into the microspherical structure in the synthesis process to form a porous spherical carbon-carbon nanotube-sulfur composite (PSC-CNT-S). CNT incorporation effectively raises the conductivity of the composite, and thus significantly improves its high-rate performance. At a high current density of 2.8 mA/cm2, an initial capacity of 1100 mAh/g and a reversible capacity of 700 mAh/g after 200 cycles were achieved in PSC-CNT-S. The resultant areal capacity of over 3.5 mAh/cm2 is much higher than in previous reports of Li-S cathodes fabricated using coating techniques.

Porous Spherical Carbon/sulfur Nanocomposites by Aerosol-Assisted Synthesis: the Effect of Pore Structure and Morphology on Their Electrochemical Performance As Lithium/sulfur Battery Cathodes.

Palladium nanocrystals-imbedded mesoporous hollow carbon spheres with enhanced electrochemical kinetics for high performance lithium sulfur batteries

Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery

Mesoporous Carbon-Sulfur Composite Microspheres with Multiscale Morphology Control to Achieve High Areal Capacity for Lithium-Sulfur Battery Cathodes

Porous Spherical Polyacrylonitrile-Carbon Nanocomposite with High Loading of Sulfur for Lithium–sulfur Batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

A Mixed Microporous/Low-range Mesoporous Composite with High Sulfur Loading from Hierarchically-structured Carbon for Lithium Sulfur Batteries

A hierarchical micro/mesoporous carbon fiber/sulfur composite for high-performance lithium-sulfur batteries

Three-dimensional porous carbon composites containing high sulfur nanoparticle content for high-performance lithium–sulfur batteries

Synthesis and Characteristics of Nanoporous Carbon Spheres /S Composite as Cathode Material for Li-S Battery

Nitrogen-doped Porous Carbon Nanofiber Webs/sulfur Composites As Cathode Materials for Lithium-Sulfur Batteries

Electrosprayed Multiscale Porous Carbon Microspheres As Sulfur Hosts for Long-Life Lithium-Sulfur Batteries

Mesoporous carbon-carbon nanotube-sulfur composite microspheres for high-areal-capacity lithium-sulfur battery cathodes.

Porous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells

Amylose-Derived Macrohollow Core and Microporous Shell Carbon Spheres As Sulfur Host for Superior Lithium-Sulfur Battery Cathodes.

A Conductive Ni2P Nanoporous Composite with a 3D Structure Derived from a Metal-Organic Framework for Lithium-Sulfur Batteries

Revisit Carbon/Sulfur Composite for Li-S Batteries

Sulfur‐Impregnated, Sandwich‐Type, Hybrid Carbon Nanosheets with Hierarchical Porous Structure for High‐Performance Lithium‐Sulfur Batteries

Effect of Loading Methods on the Performance of Hierarchical Porous Carbon/sulfur Composites in Lithium Sulfur Batteries

Incorporating Cobalt Nanoparticles in Nitrogen-Doped Mesoporous Carbon Spheres Through Composite Micelle Assembly for High-Performance Lithium-Sulfur Batteries