Abstract:In this work, a polymer precursor was first synthesized using p-terphenyl (TP) and terephthaloyl chloride (TC) as monomers. Then, cross-linking was realized by means of a Schiff base reaction with melamine (MA) as a modifier to obtain an amine-functionalized porous organic polymer TP-TC-MA. The synthesized polymers were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), and point of zero charge (pHpzc) measurements, as well as on the basis of nitrogen adsorption-desorption isotherms. Adsorption experiments were carried out to evaluate the adsorption properties of TP-TC-MA for methyl orange (MO), a typical anionic azo dye that has widespread industrial application. The amount of MO adsorbed on TP-TC-MA was evaluated by ultraviolet-visible (UV-Vis) spectroscopy at a wavelength of 463 nm. Microscopic analysis revealed that the as-synthesized polymer had an aggregated particle-shaped structure. XRD spectra confirmed that TP-TC-MA was an amorphous polymer, consistent with the results of high-resolution TEM experiments. The Brunauer-Emmett-Teller (BET) specific surface area and total pore volume of TP-TC-MA were determined as 708.5 m 2/g and 0.556 cm3/g, respectively. The measured pHpzc of TP-TC-MA was 4.0, probably because of the abundant nitrogen-containing groups provided by MA. The factors affecting adsorption, such as pH, adsorbent dosage, contact time, initial pollutant concentration, and ionic strength, were investigated. Because of the protonation of the N-atom in TP-TC-MA, the pH had a strong impact on the adsorption of MO. The removal efficiency could be maximized at the optimized pH of 3.0. The adsorption equilibrium isotherm, measured at 25 ℃ and a concentration of 50-500 mg/L, showed that the MO adsorption over TP-TC-MA followed the Langmuir isotherm, with a maximum adsorption capacity of 156.3 mg/g. The modeling of the experimental adsorption data was consistent with the pseudo-second-order kinetic model, which indicated fast adsorption and chemisorption as the dominant mechanism. With increasing ionic strength, the adsorption of MO slightly decreased, suggesting a partial antagonistic ion effect. Results of the selectivity study revealed that TP-TC-MA was more selective toward MO than methylene blue (MB), which indicated that electrostatic interactions played a significant role during the adsorption progress. Five adsorption-desorption cycles showed that TP-TC-MA could be regenerated without significant deterioration of its adsorption efficiency, indicating that it has good stability and reusability. The observed adsorption performance indicated that this MA-modified porous organic polymer offers prospects for further research and application in the treatment of dye-containing wastewaters.

Adsorption of Methyl Violet Onto Mesoporous MCM-48 from Aqueous Solution.

Gradient Adsorption of Methylene Blue and Crystal Violet onto Compound Microporous Silica from Aqueous Medium

Adsorption of Methyl Green dye onto MCM-41: equilibrium, kinetics and thermodynamic studies

Carboxymethyl cellulose structured nano-adsorbent for removal of methyl violet from aqueous solution: isotherm and kinetic analyses

Preparation and Adsorption Properties of MCM-41 with Novel Gemini Ionic Liquid Surfactants as Template

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Removal of Methyl Violet and Cationic Gold Yellow from Aqueous with Porous Magnetic Polymer Microspheres and Its Adsorption Kinetics

Removal of Methyl Violet from Aqueous Solution by Adsorption onto Halloysite Nanoclay: Experiment and Theory

Single and simultaneous adsorption of basic dyes by novel organo-vermiculite: A combined experimental and theoretical study

Dye Adsorption on Electrochemical Exfoliated Graphene Oxide Nanosheets: Ph Influence, Kinetics and Equilibrium in Aqueous Solution

[Preparation of melamine-functionalized porous organic polymer and its adsorption properties for methyl orange]

Ordered Mesoporous Carbon as Adsorbent for the Removal of a Triphenylmethane Dye from Its Aqueous Solutions

Hyperbranched Polyglycerol/Poly(Acrylic Acid) Hydrogel for the Efficient Removal of Methyl Violet from Aqueous Solutions

Synthesis of Sodium Carboxymethyl Cellulose/Poly(acrylic acid) Microgels via Visible-Light-Triggered Polymerization as a Self-Sedimentary Cationic Basic Dye Adsorbent

Controlling textural, surface and adsorption characteristics of MCM-48 via hydrothermal treatment

Large-pore Mesostructured Silicas Templated from Amphiphilic Diblock Copolymer PEO-b-PCL: Synthesis, Structure, and Methyl Orange Adsorption

Preparation of cationic surfactant modified two-dimensional (2D) multi-layered Ti 3 C 2 T x MXene for methyl orange removal from aqueous solution: Kinetic, equilibrium, and adsorption mechanisms

A facile approach to fabricate porous UMCM-150 nanostructures and their adsorption behavior for methylene blue from aqueous solution

Adsorption removal of methyl violet from aqueous solution by chromium phosphovanadate

Adsorption of Methyl Orange from Aqueous Solution on Anion Exchange Membranes: Adsorption Kinetics and Equilibrium