Application of Ultrasound Nondestructive Evaluation to Grading Pallet Parts
D. Schmoldt,J. Duke,M. Morrone,Christopher Jennings
Abstract:High-quality pallets are easier to repair and last longer. To obtain the high-quality parts necessary to build durable pallets requires grading and sorting by an automated inspection system. Ultrasonic sensing was selected for this application because 1) it is relatively inexpensive; 2) it can penetrate and characterize internal features of wood specimens; and 3) its effectiveness has been demonstrated for certain features of wood. This study has sought to 1) determine the ultrasonic parameters that are most sensitive to pallet part defects; and 2) specify which aspects of ultrasonic response signals best characterize defect size and location. Time-of-flight measurements appear reliable for delineating knots from clear wood. Also, preliminary indications are that peak amplitude may be sensitive to areas with splits/ checks/shake. Results from this work and subsequent studies will be applied to the development of an industrial prototype that automatically detects defects and grades parts according to established visual grading rules. The authors are, respectively Res. Forest Prod. Technologist, USDA Forest Serv., Brooks Forest Prod. Center, VPIS Professor, Dept. of Engineering Sci. and Mechanics, Materials Sci. and Engineering, VPIS Laboratory Technician, Dept. of Engineering Sci. and Mechanics, VPIS and Laboratory Technician, Dept. of Wood Sci. and Forest Prod., Brooks Forest Prod. Center, VPIS and 2) deckboards, the topand bottomfacing materials that provide dimensional stability and product placement. There are many variants of this basic design, but most pallets contain solid wood components that are produced from lumber or from the center cant material of logs. Cant material has a high percentage of defect area and is generally not highly valuable for other solid wood products. Ultrasonic testing has been used by other investigators to examine wooden objects. Previous work has established that knots can be detected in hardwood and softwood lumber (5,6), decay is detectable in structural timbers (’7,9), beams can be graded for strength in situ (8), dry-coupled transducers can be used to detect knots and decay Schmoldt, Duke, Morrone, and Jennings — 183 in timber bridge members (2,3), knots, decay, and cross grain are detectable in small laboratory samples (4), and wooden art objects can be examined for small cracks and other degradation (1). In most of these studies, softwood species, such as southern yellow pine (Pinus spp.), Suisse spruce, Douglas-fir (Pseudotsuga menziesii (Mirb.) France), and white fir (Abies concolor (Gord. and Glend.) Lindl. ex Hildebr.), were examined. With some exceptions (2,3 ,5,6), reports on the application of ultrasound to hardwood species is limited. Physical and mechanical properties of hardwoods differ from softwoods, and previous ultrasonic examination methods for softwoods may not directly translate to hardwood applications. Because many different hardwood species are used in pallets, inspection methods must be adaptive to interspecific dissimilarities. Additionally, pallet parts are rough cut, and therefore wood surfaces can vary greatly in smoothness and in reflectance of elastic waves.