Abstract:The study concentrates on systematic investigations on the effects of extremely high or low carbon concentration (2%-14%) and gas pressure (800 Pa-3200 Pa) on crystal structures, grain sizes, phase compositions, surface and cross-sectional morphologies, growth rates, surface roughness, mechanical and tribological performances of various polycrystalline diamond films synthesized on cemented carbide (WC-Co) substrates with hydrogen-rich/ argon-lean gas mixture adopting hot filament chemical vapor deposition (HFCVD) method. The crystal structure, grain size and phase composition of various diamond films synthesized with different carbon concentration and gas pressure were analyzed, indicating that as-deposited diamond films cover microcrystalline diamond (MCD), submicrocrystalline diamond (SMCD), nanocrystalline diamond (NCD) and ultrananocrystalline diamond (UNCD). The surface and cross-sectional morphologies of these various polycrystalline diamond films were observed, and the growth rates of various diamond films were calculated. The three-dimensional morphologies and surface roughness were obtained. With increasing the carbon concentration and decreasing the gas pressure during the synthesis, the crystal size decreases so that diamond film with high smoothness, low surface roughness can be obtained. Subsequently, the synthesis mechanisms of MCD, SMCD, NCD and UNCD films with different carbon concentration and gas pressure under hydrogen-rich gas mixture adopting HFCVD were discussed in detail. The elastic modulus and nanohardness of different diamond films were measured quantitatively, and the film-substrate adhesion were evaluated qualitatively. Moreover, the tribological performances of various diamond films synthesized with different carbon concentration and gas pressure were studied by sliding against silicon nitride (Si3N4) ceramic balls. Results indicate that obtaining the dynamic equilibrium between sufficiently renucleation rate of diamond nuclei and effectively removal rate of non-diamond carbon phase by adjusting carbon and gas pressure under the hydrogen-rich gas chemistry can contribute to the synthesis of high-quality UNCD film.

The Effects of Ti Carbonization on the Nucleation and Oriented Growth of Diamond Films on Cemented Carbide.

Effects of TiMoTa nano-crystalline interlayer on nucleation, adhesion and tribological behaviors of diamond coating

Influence of Titanium Ion Implantation on Nucleation of Diamond Films on Tungsten Carbide

Microstructure and Tribological Properties of Diamond-Like Carbon and Tialsicn Nanocomposite Coatings

Influence of Carbon Contents on the Structure and Tribocorrosion Properties of Tisicn Coatings on Ti6al4v

Effects of the In Situ Growth of CNTs on Ti-Coated Diamond Surfaces on the Mechanical Properties of Diamond/Aluminum Composites

Microstructure and Tribological Performance of Self-Lubricating Diamond/tetrahedral Amorphous Carbon Composite Film

Effects of Ti Content on Microstructure, Mechanical and Tribological Properties of Ti-doped Amorphous Carbon Multilayer Films

Coupling Effects of Methane Concentration and Nitrogen Addition Level on Morphologies and Properties of MPCVD Diamond Films on WC-Co Substrates

ENHANCEMENT OF ADHESION STRENGTH AND TRIBOLOGICAL PERFORMANCE OF CVD DIAMOND FILMS ON TUNGSTEN CARBIDE SUBSTRATES WITH HIGH COBALT CONTENT VIA AMORPHOUS SiC INTERLAYERS

Deposition and Characterization of Nanocrystalline Diamond Films on Co-cemented Tungsten Carbide Inserts

Tribological Properties of TiN/diamond and TiAlN/diamond Bilayer Films Sliding Against Carbon Steel

Investigation on the Long-Duration Tribological Performance of Bilayered Diamond/Diamond-Like Carbon Films

Investigations on microstructure, mechanical and tribological properties of TiN coatings deposited on three different tool materials

Effects of Tungsten Metal Coatings on Enhancing the Characteristics of Ultrananocrystalline Diamond Films

The Microstructure and Wear Properties of Diamond Composite Coatings on TC4 Made by Induction Brazing

Influences of different temperatures on the mechanical properties and wear resistance against Ti6Al4V of Ti doped diamond-like carbon deposited on cemented carbide

Effects of Ti Addition on Microstructure and Tribological Properties of in Situ Composite Carbide Coating WC-TiC/FeNi Fabricated by Plasma Transferred Arc Metallurgical Reaction

Preparation of HFCVD Spherical Diamond Films and the Effect of Crystal Orientations on Adhesion and Tribological Properties

Preparation and tribological behavior of TiN/a-C composite films deposited by DC magnetron sputtering

Effects of Carbon Concentration and Gas Pressure with Hydrogen-Rich Gas Chemistry on Synthesis and Characterizations of HFCVD Diamond Films on WC-Co Substrates