Abstract:Metal fluoride cathodes are promising candidates for next-generation rechargeable lithium metal batteries (LMBs). However, the sluggish reaction kinetics limits their electrochemical applications, especially at high mass loadings. Moreover, current designs on fluoride cathodes hardly achieve the related practical pouch cells and full cells. A honeycombed FeF3@C nanocomposite with high specific surface area (SSA) of 191.6 m2 g−1, is successfully synthesized herein, where the nanosized FeF3 particles (less than 40 nm) are uniformly embedded in the honeycombed carbon matrix. Benefiting from the unique configuration, it can provide an efficient mixed Li+/e− conduction networks then enable excellent lithium storage performance under three-electron transfer reaction even at high mass loadings. The high-loading honeycombed FeF3@C (∼3.5 mg cm−2) cathode offers a reversible specific capacity of 369.9 mAh g−1 after 500 cycles in a Li half-cell, corresponding to noticeable areal capacity of ∼1.25 mAh cm−2. In order to further investigate their practical applications, as-produced FeF3@C−Li pouch cell is constructed, delivering average nominal capacity of ∼50 mAh per cycle. Furthermore, the FeF3−prelithiated Si (PLSi) full cell is produced for the first time, demonstrating cycle life over 200 cycles and rate capability up to 5C. Notably, the as-produced cathodes show partially reversible phase transition during discharge/charge, which offers abundant fresh phase interface, contributing to growing pseudocapacitance and Li+ migration ability as the cycle proceeds. The pseudocapacitance compensates for lost capacity caused by incompletely reversible phase transition, and enables superior electrochemical properties.

Confined iron fluoride@CMK-3 nanocomposite as an ultrahigh rate capability cathode for Li-ion batteries.

Understanding the Conversion Mechanism and Performance of Monodisperse FeF2 Nanocrystal Cathodes

Multicore-Shell Iron Fluoride @ Carbon Microspheres as Long-life Cathode for High-Energy Lithium Battery

Carbon Nanohorns Carried Iron Fluoride Nanocomposite with Ultrahigh Rate Lithium Ion Storage Properties

Ultrasmall Iron Fluoride Nanoparticles Embedded in Graphitized Porous Carbon Derived from Fe‐Based Metal Organic Frameworks As High‐Performance Cathode Materials for Li Batteries

In Situ Lithiated Fef3/C Nanocomposite As High Energy Conversion-Reaction Cathode for Lithium-Ion Batteries

Enabling Long Cycle Life and High Rate Iron Difluoride Based Lithium Batteries by In Situ Cathode Surface Modification

Nanosized FeF3·0.33H2O As Cathode Material for High-Performance Li-Ion Batteries

Nanostructured 0.8Li 2FeSiO 4/0.4Li 2SiO 3/C composite cathode material with enhanced electrochemical performance for lithium-ion batteries

Mild and cost-effective synthesis of iron fluoride-graphene nanocomposites for high-rate Li-ion battery cathodes

3D Honeycomb Architecture Enables a High-Rate and Long-Life Iron (III) Fluoride-Lithium Battery

Nanosized FeF30.33H<sub>2</sub>O as Cathode Material for High-Performance Li-Ion Batteries

Iron Fluoride Nanoparticles Embedded in a Nitrogen and Oxygen Dual-doped 3D Porous Carbon Derived from Nori for High Rate Cathode in Lithium-ion Battery

Pseudocapacitance-Enhanced Storage Kinetics of 3D Anhydrous Iron (III) Fluoride as a Cathode for Li/Na-Ion Batteries

Fe3O4 Nanoparticle-Decorated Bimodal Porous Carbon Nanocomposite Anode for High-Performance Lithium-Ion Batteries

Bottom-up assembly of yolk-shell FeF 3 @C nanocomposites as high-rate, long-term and air-stable cathodes

Mesoporous Li2FeSiO4@ordered Mesoporous Carbon Composites Cathode Material for Lithium-Ion Batteries

Carbon-encapsulated Fe3O4 nanoparticles as a high-rate lithium ion battery anode material.

Engineering In Situ: N-Doped Porous Carbon-Confined FeF 3 for Efficient Lithium Storage

High-performance Honeycombed FeF3@C Cathodes Enabling Practical Lithium Pouch Cells and Silicon−metal Fluoride Batteries

Nitrogen-enriched graphitic carbon encapsulated Fe3O4/Fe3C/Fe composite derived from EDTA-Fe(III) sodium complex as LiBs anodes with boosted performance