Abstract:Due to their higher specific area and, in most cases, higher adsorption capacity, nanomaterials are noteworthy and attractive adsorbents. Agricultural products that are locally available are the best option for removing methylene blue (MB) dye from aqueous solutions. Because it is self-anionic, FT-IR and SEM investigations of biosorption have confirmed the role of the functional group and its contribution to the formation of pores that bind cationic dye. It is endothermic if the adsorption of MB by an adsorbent is high as the temperature increases; on the other hand, exothermic if it is high as the temperature decreases. A basic medium facilitates adsorption with respect to pH; adsorption is proportional to the initial concentration at a certain level before equilibrium; after equilibrium, adsorption decreases. A pseudo-second-order model applies for certain agricultural products. As per plotted graph for the solid-phase concentration against the liquid-phase concentration, the Langmuir adsorption isotherm model is favored; this model describes a situation in which a number of molecules are adsorbed by an equal number of available surface sites, and there is no interaction between adsorbate molecules once all sites are occupied. In contrast, the Freundlich model depicts non-ideal multi-layer sorption onto heterogeneous surfaces via numerical analysis; with a value of n = 1, the result is a linear isotherm. If the value of n 1, then it is chemical or physical adsorption, respectively. Based on an EDX analysis, relevant elements are confirmed. BET analysis confirms the surface area. Nanoproducts categorized as agricultural products exhibit the aforementioned tendency. Even though nanoparticles show positive outcomes in terms of higher adsorption, a high specific area for the targeted pollutant is needed in real-world applications. In the relevant sections herein, the behavior of thermodynamic parameters, such as enthalpy, entropy, and Gibbs free energy, are examined. There is some question as to which form of agricultural waste is the most effective adsorption medium. There is no direct answer because every form of agricultural waste has its own distinct chemical and physical characteristics, such as porosity, surface area, and strength.

Thermodynamic parameters for adsorption equilibrium of heavy metals and dyes from wastewaters (vol 160, pg 24, 2014)

The adsorption property investigation of tetraethylenepentamine functionalized nano-Fe3O4 polymer adsorbents on Cu(II) from wastewater

Correction to the thermodynamic calculation using the Langmuir isotherm model by Saeed et al. (2022)

Isotherm models for adsorption of heavy metals from water - A review

Effective Adsorption Ag(I) Onto Triethylenetetramine-Modified Chitosan Beads: Adsorption Equilibrium, Kinetic, and Thermodynamic Studies

Comparison and interpretation of isotherm models for the adsorption of dyes, proteins, antibiotics, pesticides and heavy metal ions on different nanomaterials and non-nano materials—a comprehensive review

Adsorption of Congo Red and Methylene Blue onto Nanopore-Structured Ashitaba Waste and Walnut Shell-Based Activated Carbons: Statistical Thermodynamic Investigations, Pore Size and Site Energy Distribution Studies

Thermodynamic Analysis of Adsorption Process at a Non-Equilibrium Steady State

Adsorption kinetics and isotherm models of heavy metals by various adsorbents: An overview

A review on adsorbent parameters for removal of dye products from industrial wastewater

A Review on Heavy Metal Ions and Dye Adsorption from Water by Agricultural Solid Waste Adsorbents

Thermodynamic Study on Adsorption of Aromatic Sulfonic Acids Onto Macroporous Weak Base Anion Exchanger from Aqueous Solutions

Adsorption of Dyes by Sludge

The removal of basic dyes from aqueous solutions using agricultural by-products

Impact Assessment of Excess Discharges of Organics and Nutrients into Aquatic Systems by Thermodynamic Entropy Calculation

Isotherms, kinetics and thermodynamics of dye biosorption by anaerobic sludge

Exploring the Biosorption of Methylene Blue Dye onto Agricultural Products: A Critical Review

Biosorption of heavy metals from solution by tea waste: a review]

Equilibrium Analysis of Sorbents Behavior on Cd Adsorption Under MSW Incineration Conditions

Single metal isotherm study of the ion exchange removal of Cu(II), Fe(II), Pb(II) and Zn(II) from synthetic acetic acid leachate

Understanding the adsorption of Reactive red 2 onto metal hydroxide sludge: analysis with physico-statistical steric and energetic perspectives