Abstract:One of the major problems in freeform illumination design in a geometrical optics approximation is picture generation with extended light sources. In contrast to the freeform design with zero-étendue sources, the extension of the light source leads to the typical blurring effect and a contrast reduction of the required irradiance. This effect can be minimized by increasing the distance between the freeform surface and the light source, which according to étendue conservation, results in an impractically large projection optic. To tackle this problem, we propose a design concept consisting of the combination of a pattern-generating double freeform surface for collimated beam shaping, which is calculated for a zero-étendue light source, and an imaging projection system with a telecentric object space. The design concept works independently of the shape of the emission area of the light source and does not require a representation of the extended light source by several individual wavefronts. By interpreting the pattern blurring effect as a composition of a shift contribution and a distortion contribution, we show that both can be minimized simultaneously by an appropriate placement of the object plane of the imaging optics and by making the distance between both freeform surfaces as small as possible. This allows the calculation of compact, energy-efficient freeform illumination systems for picture generation with real extended light sources. We demonstrate the significant blurring reduction by designing a simple illumination system consisting of a collimation optic, a (zero-étendue) double freeform lens for collimated beam shaping, and a projection lens for the generation of the target distribution "Elaine" with an extended Lambertian emitter of 3 mm×3 mm extension and ±42 deg maximum opening angle. For a working distance to the projection system of 500 mm and a target area of 300 mm×300 mm, a relative blurring extension of 2% is estimated, compared to 23% for a single freeform projector with the same energy throughput and similar lateral extension. The influence of the doublefreeform thickness on the blurring reduction is demonstrated, and a summary of the design procedure for the developed design concept is given.

Overlapping-Based Optical Freeform Surface Construction For Extended Lighting Source

Formulating the Design of Two Freeform Lens Surfaces for Point-Like Light Sources.

Design of Freeform Illumination Optics

Design Of Freeform Lenses For Illuminating Hard-To-Reach Areas Through A Light-Guiding System

Freeform Surface Lens for LED Uniform Illumination.

Freeform Led Lens For Uniform Illumination

Freeform Surface Lens Design for Uniform Illumination

Designing Two Freeform Surfaces with Monge–Ampère Equation Method for Point-Like Sources

Application of a Modified LED Lens Model on a Double Free-form Surface

Freeform Optical Design of Beam Shaping Systems with Variable Illumination Properties.

Design of High-Compactness Freeform Optical Surfaces Via Energy Accumulating Optimization

Design Beam Shapers with Double Freeform Surfaces to Form a Desired Wavefront with Prescribed Illumination Pattern by Solving a Monge-Ampère Type Equation

Freeform Illumination Design Model for Multiple Light Sources Simultaneously.

Freeform Lens Arrays For Off-Axis Illumination In An Optical Lithography System

Efficient Optimal Design of Smooth Optical Freeform Surfaces Using Ray Targeting

Freeform lens for off-axis illumination in optical lithography system

Feedback Modification Strategy for Designing a Free-Form Optical Surface with Given Illumination Pattern

A Freeform Optics Design with Limited Data for Extended Led Light Sources

Combined Feedback Method for Designing A Free-Form Optical System with Complicated Illumination Patterns for an Extended Led Source

Ray Targeting for Optimizing Smooth Freeform Surfaces for Led Non-Rotational Illumination

Compact freeform illumination system design for pattern generation with extended light sources