Abstract:Structural Health Monitoring, Ahead of Print. Ultrasonic testing technology is widely used for its exceptional accuracy and resolution. Commercial ultrasonic testing systems basically use piezoelectric transducers as ultrasonic excitation elements. However, the performance of piezoelectric transducers is not stable enough in high-temperature and high-humidity environments. Therefore, a fiber optic laser-ultrasonic transmitter based on collapsed photonic crystal fiber (CPCF) was proposed. The CPCF guides the laser in the core into the photoacoustic material and realizes the ultrasonic excitation on the side wall of the fiber based on the optical-thermal-acoustic energy conversion. Finite element analysis and experimental research on the photonic crystal fiber (PCF)-CPCF-PCF microstructure show that controlling the CPCF length precisely enables quantitative modulation of the optical coupling coefficient, reflecting the optical energy in photoacoustic energy conversion. Three PCF-CPCF-PCF microstructures with different optical coupling coefficients were fusion spliced onto an optical fiber, and three-point ultrasonic excitation was successfully achieved on aluminum plates. The peak-to-peak values are all around 1.5 V, indicating that the energy of ultrasonic waves is balanced, which helps realize the baseline-free and standardized application of transmitters. Furthermore, the detection effect of ultrasonic waves generated by the transmitter on the thickness and defects of the plate was studied. By analyzing the ultrasonic echoes in the aluminum and carbon fiber-reinforced polymer plates, the corresponding wave speeds were calculated to be 6030.52 and 2522.34 m/s, similar to the longitudinal wave speeds in the corresponding materials. The indicators of ultrasonic waves in the time domain and frequency domain are sensitive to the thickness and defects of the plate. The amplitude and time-of-flight of the ultrasonic wave change monotonically with increasing damage severity. This study elucidates the principle of the fiber optic ultrasonic transmitter and demonstrates its capability of quasi-distributed ultrasonic excitation. Furthermore, the feasibility of non-destructive testing based on this transmitter was also verified.

Distributed Fiber-Optic Laser-Ultrasound Generation Based on Ghost-Mode of Tilted Fiber Bragg Gratings.

Study of distributed fiber-optic laser-ultrasound generation based on ghost-mode of tilted fiber Bragg gratings

Multipoint Fiber-Optic Laser–ultrasound Generation along a Fiber Based on the Core-Offset Splicing of Fibers

Multi-point Fiber Optic Laser-Ultrasonic Transducer Based on Long-Period Fiber Grating

Fiber-optic multipoint laser-ultrasonic excitation transducer using coreless fibers

Fiber-optic Laser-Ultrasound Generation on a Fiber Side Wall Based on Peanut-Shape Structure

Multipoint Laser Ultrasound Transmitter Using Single-Multi-single Mode Fiber Structures

Side-excitation Fiber-optic Laser-Ultrasonic Transducer Based on Fused Taper Fiber

Efficient Laser-Ultrasound Generation At Optical Fiber Sidewall Based On Core-Offset Splicing Fiber

A Multi-Point Switchable and Self-Adaptive Ultrasonic Sensor Using Fiber Bragg Gratings in a Fiber Ring Laser

Multipoint All-Fiber Laser-Ultrasound Transducer Using Cascaded Fiber Waist-Enlarged Fusion Tapers

Multipoint Fiber-Optic Ultrasonic Actuator Based on Bent Fiber Structures along a Single Fiber

An OTDR and Gratings Assisted Multifunctional Fiber Sensing System

Multipoint Fiber-Optic Laser-Ultrasonic Actuator Based on Fiber Core-Opened Tapers.

Modulated Pulses Based High Spatial Resolution Distributed Fiber System for Multi-Parameter Sensing

A fiber optic laser-ultrasonic transmitter based on collapsed photonic crystal fiber for ultrasonic testing

The Interrogation of Quasi-Distributed Optical FBG Sensing System Through Adopting a Wavelength-Tunable Fiber Chaotic Laser

Ultrasonic optical fiber sensing for composite structural health monitoring

Time- and Wavelength-Division Multiplex Distributed Sensing Interrogation System Based on Distributed Feedback Laser Array and Ultraweak Fiber Bragg Grating

Ultrasonic Lamb Wave Detection Based on a Tunable, Narrow-Linewidth, and Frequency-Locked Fiber Laser

Dynamic Quasi-Distributed Ultraweak Fiber Bragg Grating Array Sensing Enabled by Depth-Resolved Dual-Comb Spectroscopy