Abstract:Designing an illumination system for a surface light source with a strict compactness requirement is quite challenging, especially for the general three-dimensional (3D) case. In accordance with the two key features of an expected illumination distribution, i.e., a well-controlled boundary and a precise illumination pattern, a two-step design method is proposed in this paper for highly compact 3D freeform illumination systems. In the first step, a target shape scaling strategy is combined with an iterative feedback modification algorithm to generate an optimized freeform optical system with a well-controlled boundary of the target distribution. In the second step, a set of selected radii of the system obtained in the first step are optimized to further improve the illuminating quality within the target region. The method is quite flexible and effective to design highly compact optical systems with almost no restriction on the shape of the desired target field. As examples, three highly compact freeform lenses with ratio of center height h of the lens and the maximum dimension D of the source ≤ 2.5:1 are designed for LED surface light sources to form a uniform illumination distribution on a rectangular, a cross-shaped and a complex cross pierced target plane respectively. High light control efficiency of η > 0.7 as well as low relative standard illumination deviation of RSD < 0.07 is obtained simultaneously for all the three design examples.

A Fast Feedback Method to Design Easy-Molding Freeform Optical System with Uniform Illuminance and High Light Control Efficiency.

Freeform Led Lens For Uniform Illumination

Design Of Freeform Lenses For Illuminating Hard-To-Reach Areas Through A Light-Guiding System

Combined Feedback Method for Designing A Free-Form Optical System with Complicated Illumination Patterns for an Extended Led Source

Freeform Surface Lens for LED Uniform Illumination.

Design of Freeform Illumination Optics

Feedback Modification Strategy for Designing a Free-Form Optical Surface with Given Illumination Pattern

Design of Compact and Smooth Free-Form Optical System with Uniform Illuminance for LED Source.

Freeform Lens Design for LED Illmination

Freeform Optical Design of Beam Shaping Systems with Variable Illumination Properties.

Secondary Optical Design for LED Illumination Using Freeform Lens

Application of a Modified LED Lens Model on a Double Free-form Surface

Formulating the Design of Two Freeform Lens Surfaces for Point-Like Light Sources.

Precise light control in highly tilted geometry by freeform illumination optics

Freeform Surface Lens Design for Uniform Illumination

Optimized Design of LED Freeform Lens for Uniform Circular Illumination

53.2: An Optimization Design Method of LED Freeform Lens for Uniform Circular Illumination

A Freeform Optics Design with Limited Data for Extended Led Light Sources

Ray Targeting for Optimizing Smooth Freeform Surfaces for Led Non-Rotational Illumination

Two-step Design Method for Highly Compact Three-Dimensional Freeform Optical System for LED Surface Light Source

Freeform Lens Arrays For Off-Axis Illumination In An Optical Lithography System