Abstract:A simply fabricated, highly sensitive, and inexpensive optical fiber temperature sensor is reported with a Fabry–Perot (FP) microcavity of controlled length. The microcavity with controllable length is fabricated by single-mode fiber (SMF) and polydimethylsiloxane (PDMS) for temperature sensing. After the PDMS is cured, the SMF is connected to the supercontinuum light source (SCLS) and the optical spectrometer analyzer (OSA) for online observation of the reflection spectrum. The micro-displacement platform is used to pull the SMF to form an air cavity. After the air cavity is stabilized, ultraviolet (UV) activated glue is used for packaging outside the PDMS. The FP microcavity is formed by the end face of the SMF and the face of PDMS. The length of the FP microcavity can be controlled online by the micro-displacement platform to a minimum of 15 µm. The free spectral range (FSR) may reach 74.8 nm and the interference fringe contrast (IFC) is up to 19.8 dB to allow sensitive measurements across a wide temperature range. The experiments demonstrate a high temperature sensitivity of 5.388 nm/°C from 33 to 93 °C with high repeatability and linearity (R2=0.9937). Stability experiments showed that the maximum changes in wavelength and intensity are only 45 pm and 0.035 dB, respectively. It is anticipated that the easily constructed, compact, and inexpensive fiber-optic temperature sensor will be employed in practical applications.

Temperature sensing using the bandgap-like effect in a selectively liquid-filled photonic crystal fiber.

Temperature-controlled transformation in fiber types of fluid-filled photonic crystal fibers and applications.

High Sensitivity Temperature Sensor with an Avoided-Crossing Based Selective-Filling High Birefringent Photonic Crystal Fiber Sagnac Interferometer.

Temperature sensor based on surface plasmon resonance within selectively coated photonic crystal fiber.

Ultrahigh Temperature Sensitivity Using Photonic Bandgap Effect in Liquid-Filled Photonic Crystal Fibers

Two-core photonic crystal fiber with selective liquid infiltration in the central air hole for temperature sensing

Hybrid photonic crystal fiber for highly sensitive temperature measurement

A Highly Sensitive Photonic Crystal Fiber Temperature Sensor Based on Sagnac Interferometer with Full Liquid Filling

Temperature Sensor Based on Selectively Liquid Infiltrated Dual Core Photonic Crystal Fiber

A Photonic Crystal Fiber Temperature Sensor Based on Forward Stimulated Fluorescence Emission

Investigation of Temperature Sensing Characteristics in Selectively Infiltrated Photonic Crystal Fiber.

Some Features of the Photonic Crystal Fiber Temperature Sensor with Liquid Ethanol Filling.

Temperature Sensor Based on an Isopropanol-Sealed Photonic Crystal Fiber In-Line Interferometer with Enhanced Refractive Index Sensitivity

Ultra-sensitive temperature sensor based on liquid crystal infiltrated photonic crystal fibers

Selectively Infiltrated Photonic Crystal Fiber With Ultrahigh Temperature Sensitivity

Research of Photonic Crystal Fiber Temperature Sensor with Mixture Liquid Filling

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Thermally Tunable Dual-Core Photonic Bandgap Fiber Based on the Infusion of A Temperature-Responsive Liquid

An Inline Ultrasensitive Temperature Sensor Based on Liquid-Filled Photonic Crystal Fiber Mach-Zehnder Modal Interferometer

Highly Sensitive Temperature Sensor Based on Hybrid Photonic Crystal Fiber.