Abstract:Methylmercury-imprinted and non-imprinted polymers were prepared by formation monomer complex of methylmercury with (4-ethenylphenyl)-4-formate-6-phenyl-2,2′-bipyridine and thermally polymerizing with divinylbenzene (crosslinker) in the presence of 2,2′-azobisisobutyronitrile as initiator and subsequently leached with the acidic thiourea solution (1.0molL−1 of thiourea and 4.0molL−1 of HCl). In the same way, non-imprinted copolymers were prepared without methylmercury chloride added. The separation and preconcentration characteristics of the polymers for methylmercury were investigated by batch and column procedures. The results demonstrated that the methylmercury-imprinted polymers had higher adsorption capacity (170μmolg−1 of dry microbeads) and good selectivity for methylmercury compared to non-imprinted polymers. The distribution ratio (D) values of the methylmercury-imprinted polymers increased for methylmercury with respect to both D values of Hg(II), Cu(II), Zn(II), Cd(II) and non-imprinted polymers. The relatively selective factor (αr) values of CH3Hg+/Hg(II), CH3Hg+/Cu(II), CH3Hg+/Zn(II), and CH3Hg+/Cd(II) are 24.0, 46.7, 50.7, and 40.2, which are greater than 1. The methylmercury-imprinted polymers can be used at least twenty times with recoveries no less than 95%. Based on the packed columns with methylmercury-imprinted polymers, a highly selective solid-phase extraction (SPE) and preconcentration method for methylmercury was developed. The metal ion imprinted polymer solid-phase extraction (MIIP-SPE) preconcentration procedure showed a linear calibration curve within concentration range from 0.093 to 22μgL−1. The detection limit and quantification limit were 0.041 and 0.093μgL−1 (3σ) for cold vapor atomic absorption spectrometry (CVAAS). The relative standard deviation of the 10 replicate determinations was 3.5% for the determination of methylmercury in human hair sample. Determination of methylmercury in certified human hair sample (IAEA-086) and soil certified reference material (CRM 580) demonstrated that the interfering substances in matrix had been almost removed during preconcentration. The methylmercury-imprinted polymers were good enough for methylmercury determination in matrixes containing components with similar chemical property such as Hg(II), Cu(II), Zn(II), and Cd(II).

Synthesis and Characterization of a High Selective Mercury(ii)-Imprinted Polymer Using Novel Aminothiol Monomer.

Ion‐imprinted thiosalicylichydrazide‐based sorbents for selective recognition of mercury (II) ions

Highly selective determination of inorganic mercury(II) after preconcentration with Hg(II)-imprinted diazoaminobenzene–vinylpyridine copolymers

Highly selective determination of methylmercury with methylmercury-imprinted polymers.

Efficient selective uptake of Hg(II) using a porous organic polymer rich in N and S atoms

Preparation and application of a new ion-imprinted polymer for nanomolar detection of mercury(II) in environmental waters

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

Synthesis of Cross-Linked Pyrazine-Based Polymers for Selective Removal of Mercury(II) Ions from Wastewater Solutions

Adsorption and Removal of Mercury(II) by a Crosslinked Hyperbranched Polymer Modified via Sulfhydryl

Novel thermo and ion-responsive copolymers based on metallo-base pair directed host-guest complexation for highly selective recognition of Hg<SUP>2+</SUP> in aqueous solution

A chelating polymer resin: synthesis, characterization, adsorption and desorption performance for removal of Hg(II) from aqueous solution

Triazine-based sulphur-containing polymers for Hg 2+ adsorption: Efficiency and mechanism

Triazine-based Sulphur-Containing Polymers for Hg2+ Adsorption: Efficiency and Mechanism

A Luminescent Hypercrosslinked Conjugated Microporous Polymer for Efficient Removal and Detection of Mercury Ions.

Efficient Removal of Mercury from Wastewater Solutions by a Nitrogen-Doped Hyper-Crosslinked Polyamine

Amine-Decorated Methacrylic Acid-based Inverse Vulcanized Polysulfide for Effective Mercury Removal from Wastewater

Studies on the Synthesis and Properties of Malachite Green Imprinted Polymer

A Reversible and Highly Selective Fluorescent Sensor for Mercury(II) Using Poly(thiophene)s that Contain Thymine Moieties

Efficient capture of mercury ions by a novel organic melamine polymer

Preparation and Adsorption Properties of a Three-Dimensional Superhydrophilic Mercury-Ion-Imprinted Polymer with Dual Recognition Site Based on MoS 2 /SBA-15

Synthesis of a Novel Poly(para-Phenylene Ethynylene) for Highly Selective and Sensitive Sensing Mercury (II) Ions