Study on Glucose Biofuel Cells Using an Electrochemical Noise Device
Yueming Tan,Qingji Xie,Jinhua Huang,Weisheng Duan,Ming Ma,Shouzhuo Yao
DOI: https://doi.org/10.1002/elan.200804220
IF: 3.077
2008-01-01
Electroanalysis
Abstract:An electrochemical noise (ECN) device was utilized for the first time to study and characterize a glucose/O-2 membraneless biofuel cell (BFC) and a monopolar glucose BFC. In the glucose/O-2 membraneless BFC, ferrocene (Fc) and glucose oxidase (GOD) were immobilized on a multiwalled carbon nanotubes (MWCNTs)/Au electrode with a gelatin film at the anode; and laccase (Lac) and an electron mediator, 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonate) diammonium salt (ABTS), were immobilized on a MWCNTs/Au electrode with polypyrrole at the cathode. This BFC was performed in a stirred acetate buffer solution (pH 5.0) containing 40 mmol/L glucose in air, with a maximum power density of 8 mu W/cm(2), an open-circuit cell voltage of 0.29 V, and a short-circuit current density of 85 mu A/cm(2), respectively. The cell current at the load of 100 k Omega retained 78.9% of the initial value after continuous discharging for 15 h in a stirred acetate buffer solution (pH 5.0) containing 40 mmol/L glucose in air. The performance decrease of the BFC resulted mainly from the leakage of the ABTS mediator immobilized at the cathode, as revealed by the two-channel quartz crystal microbalance technique. In addition, a monopolar glucose BFC was performed with the same anode as that in the glucose/O-2 membraneless BFC in a stirred phosphate buffer solution (pH 7.0) containing 40 mmol/L glucose, and a carbon cathode in Nafion-membrane-isolated acidic KMnO4, with a maximum power density of 115 mu W/cm(2), an open-circuit cell voltage of 1.24 V, and a short-circuit current density of 202 mu A/cm(2), respectively, which are superior to those of the glucose/O-2 membraneless BFC. A modification of the anode with MWCNTs for the monopolar glucose BFC increased the maximum power density by a factor of 1.8. The ECN device is highly recommended as a convenient, real-time and sensitive technique for BFC studies.