Ferric Molybdate Nanotubes Synthesized Based on the Kirkendall Effect and Their Catalytic Property for Propene Epoxidation by Air

Li Wang,Bo Peng,Xuefeng Guo,Weiping Ding,Yi Chen

DOI: https://doi.org/10.1039/b820350d

IF: 4.9

2009-01-01

Chemical Communications

Abstract:Ferric molybdate nanotubes prepared based on the Kirkendall effect and solid-state reaction exhibit a unique catalytic property for epoxidation of propene by molecular oxygen.

What problem does this paper attempt to address?

Preparation, Characterization, and Properties of Ferric Molybdate Nanotubes for Propene Epoxidation by Air

Wang Li,Ma Tao,Sheng Wei,Guo Xuefeng,Ding Weiping,Chen Yi

DOI: https://doi.org/10.1016/s1872-2067(08)60121-7

2009-01-01

Abstract:Ferric molybdate nanotubes of various compositions were prepared based on the Kirkendall effect and the solid state reaction of MoO3/FeOx core/shell nanorods at 693 K. These were characterized by transmission electron microscopy, X-ray diffraction, infrared spectroscopy, and X-ray photoelectron spectroscopy. The lower synthesis temperature used for these ferric molybdate nanotubes led to enriched Mo species on the nanotube surface and a special interaction between the Mo and Fe species within the nanotubes. Fairly high selectivity for propene oxide in the epoxidation of propene was achieved and ascribed to the unique synthetic method and nanotubular structure.
Selective Oxidation of Propene Catalyzed by Modified Ferric Molybdate with Hollow Structure

Li Wang,Weimin Yang,Xinggui Zhou,Weiping Ding,Huamxin Gao,Guojie Jin

DOI: https://doi.org/10.3969/j.issn.1000-8144.2012.10.004

2012-01-01

Abstract:Ferric molybdate nanotubes(FeMo-nt) with hollow structure were prepared based on Kirkendall effect and then modified with various additives. The physicochemical properties of the modified FeMo-nt and their catalysis in propene oxidation were studied. The results showed that there were Mo species enrichment on the FeMo-nt surface and a special interaction between the Mo and Fe species in the FeMo-nt catalysts. The modified FeMo-nt catalysts exhibited better catalytic performance in the propene oxidation by air than that of FeMo-nt and the product composition could be selectively controlled by using the catalysts modified with different additives. Moreover, the FeMo-nt catalysts modified with aminopropyl triethoxy silane(APS) can effectively inhibit the formation of CO x in the oxidation products, which leads to the obvious increase of the yields of valuable propene derivatives, such as acrolein and acrylic acid.
Preparation of Sno2/Graphene Nanocomposite and Its Application to the Catalytic Epoxidation of Alkenes with H2o2

Min Liu,Xiaozhong Wang,Yingqi Chen,Liyan Dai

DOI: https://doi.org/10.1039/c5ra11285k

IF: 4.036

2015-01-01

RSC Advances

Abstract:The SnO2/graphene nanocomposites have been achieved via hydrothermal method and used as an efficient catalyst for the epoxidation of alkenes with H2O2 in nitrile based systems for the first time.
Epoxidation of propylene to propylene oxide catalyzed by μ-oxo-bismetalloporphyrins

Zheng-lei WANG,Tong-xin ZHOU,Tao WANG,Yong-mei WEI,Jie HUANG,Heng-shui TIAN

DOI: https://doi.org/10.16606/j.cnki.issn0253-4320.2017.09.031

2017-01-01

Abstract:Epoxidation of propylene to make propylene oxide catalyzed by μ-oxo-bismetalloporphyrins is investigated.The results indicate that the reaction temperature,reaction time,molar ratio of acraldehyde to propylene,and concentration and type of catalysts have significant effects on the reaction.The appropriate reaction conditions are as follows:100℃,1.5 h,500 rpm for stirring velocity,n (acraldehyde) ∶n (propylene)=0.625,catalyst concentration at 9.72×10-5mol％.The central metal and substituent group ofμ-oxo-bismetalloporphyrins also have influence on catalytic activity.The catalytic activity order of different substituent group of μ-oxo-bismetalloporphyrins are —OCH3 ＞—H＞—F.With different central metal,the catalytic activity order are Fe＞Cu.Of which the best catalytic result is given by [T(p-OCH3) PPFe] 2 O,with the yield,selectivity and conversion rate being 27.31％,93.95％ and 29.06％ respectively.
Preparation of organic-inorganic hybrid Fe-MoOx/polyaniline nanorods as efficient catalysts for alkene epoxidation

Qingsheng Gao,Sinong Wang,Yi Tang,Cristina Giordano

DOI: https://doi.org/10.1039/c1cc15642j

IF: 4.9

2012-01-01

Chemical Communications

Abstract:Novel Fe-MoOx/polyaniline nanorods were fabricated via in situ polymerization of Mo3O10(C6H5NH3)(2)center dot 2H(2)O nanowires, in which interface reactions remarkably influenced the morphology of products; and the nanorods showed high performance in cyclooctene epoxidation due to the organic-inorganic hybrid structure and Fe3+ additive.
Fine cubic Cu2O nanocrystals as highly selective catalyst for propylene epoxidation with molecular oxygen

Wei Xiong,Xiang-Kui Gu,Zhenhua Zhang,Peng Chai,Yijing Zang,Zongyou Yu,Dan Li,Hui Zhang,Zhi Liu,Weixin Huang

DOI: https://doi.org/10.1038/s41467-021-26257-0

IF: 16.6

2021-01-01

Nature Communications

Abstract:Direct propylene epoxidation with O-2 to form propylene oxide (PO) selectively is a challenge. Here, the authors explore 27 nm-sized cubic Cu2O nanocrystals as thermocatalysts for this reaction which facilitate PO production with high selectivity, >80%, at moderate temperatures of 90-110 degrees C. Propylene epoxidation with O-2 to propylene oxide is a very valuable reaction but remains as a long-standing challenge due to unavailable efficient catalysts with high selectivity. Herein, we successfully explore 27 nm-sized cubic Cu2O nanocrystals enclosed with {100} faces and {110} edges as a highly selective catalyst for propylene epoxidation with O-2, which acquires propylene oxide selectivity of more than 80% at 90-110 degrees C. Propylene epoxidation with weakly-adsorbed O-2 species at the {110} edge sites exhibits a low barrier and is the dominant reaction occurring at low reaction temperatures, leading to the high propylene oxide selectivity. Such a weakly-adsorbed O-2 species is not stable at high reaction temperatures, and the surface lattice oxygen species becomes the active oxygen species to participate in propylene epoxidation to propylene oxide and propylene partial oxidation to acrolein at the {110} edge sites and propylene combustion to CO2 at the {100} face sites, which all exhibit high barriers and result in decreased propylene oxide selectivity.
Selective and Efficient Olefin Epoxidation by Robust Magnetic Mo Nanocatalysts

Cristina I. Fernandes,Pedro D. Vaz,Carla D. Nunes

DOI: https://doi.org/10.3390/catal11030380

IF: 3.9

2021-03-15

Catalysts

Abstract:Iron oxide magnetic nanoparticles were synthesized with different sizes (11 and 30 nm). Subsequently they were shelled with a silica layer allowing grafting of an organic phosphine ligand that coordinated to the [MoI2(CO)3] organometallic core. The silica layer was prepared by the Stöber method using either mechanical (both 11 and 30 nm nanoparticles) or ultrasound (30 nm only) stirring. The latter nanoparticles once coated with silica were obtained with less aggregation, which was beneficial for the final material holding the organometallic moiety. The Mo loadings were found to be 0.20, 0.18, and 0.34 mmolMo·g−1 for MNP30-Si-phos-Mo,MNP11-Si-phos-Mo, and MNP30-Sius-phos-Mo, respectively, with the ligand-to-metal ratio reaching 4.6, 4.8, and 3.2, by the same order, confirming coordination of the Mo moieties to two phos ligands. Structural characterization obtained from powder X-ray diffraction (XRD), scanning electron microscopy (SEM)/ transmission electron microscopy (TEM) analysis, and Fourier-transform infrared (FTIR) spectroscopy data confirmed the successful synthesis of all nanomaterials. Olefin epoxidation of several substrates catalyzed by these organometallic nano-hybrid materials using tert-butyl hydroperoxide (tbhp) as oxidant, achieved very good results. Extensive testing of the catalysts showed that they are highly active, selective, recyclable, and efficient concerning oxidant consumption.

chemistry, physical
Gas phase selective propylene epoxidation over La2O3-supported cubic silver nanoparticles

Bin Yu,Tuğçe Ayvalı,Zhi-Qiang Wang,Xue-Qing Gong,Abdulaziz A. Bagabas,S. C. Edman Tsang

DOI: https://doi.org/10.1039/c9cy00567f

2019-01-01

Abstract:It is shown that the Ag nanocube/La2O3 interface catalyses gas phase oxidation of propylene to propylene oxide cooperatively with enhanced selectivity and conversion. Dioxygen is preferentially activated and dissociated by La2O3(001) and the active atomic oxygen over the Ag(100) facet leads to selective propylene epoxidation.
Preparation of Γ-Fe2o3@c@moo3 Core/shell Nanocomposites As Magnetically Recyclable Catalysts for Efficient and Selective Epoxidation of Olefins

Fushan Zhang,Haibo Hu,Hao Zhong,Nan Yan,Qianwang Chen

DOI: https://doi.org/10.1039/c3dt53105h

IF: 4

2014-01-01

Dalton Transactions

Abstract:Magnetic γ-Fe2O3@C@MoO3 core-shell structures were fabricated via a general approach and characterized by several techniques such as XRD, XPS, ICP-AES, Raman etc. The catalytic performance of them has been demonstrated in heterogeneously catalyzed oxidation of cyclooctene with tert-butyl hydroperoxide (tBuOOH) as an oxidant, and high conversion (100%) and selectivity (over 99%) were achieved with relatively low catalyst dosage under mild conditions. It should be emphasized that the hybrid catalyst could be easily separated by an external magnet and reused up to 9 times with no significant loss of activity and selectivity. The reaction mechanism over MoO3 is also discussed on the basis of the FTIR and XPS measurements. It is suggested that the high catalytic activity is related to the formation of the transition state, a Mo-alkyl peroxide and olefin complex, which is beneficial for an efficient oxygen atom transfer by converting the intermolecular process directly into an intramolecular process.
Supported AgCuCl Nanoclusters as Bimetal Catalysts for Propylene Epoxidation with Molecular Oxygen

Siqiang Xiao,Caiyun Wei,Rui Li,Yueming Qiu,Kok Bing Tan,Yichen Zhang,Jiale Huang,Qingbiao Li

DOI: https://doi.org/10.1021/acsanm.3c01362

IF: 6.14

2023-05-31

ACS Applied Nano Materials

Abstract:Direct epoxidation of propylene (DEP) into propylene oxide using molecular oxygen is a promising approach due to high atom utilization and environmental sustainability. However, the absence of highly selective catalysts has been a challenge in this field. Herein, the ligand protected AgCuCl nanocluster was synthesized via a one-pot method and loaded onto BaCO3 to prepare a small size bimetal catalyst (AgCuCl/BaCO3-N2) via calcination under N2 atmosphere. A PO selectivity of 85.29% at a relatively mild temperature of 275 °C can be obtained. Characterizations revealed that AgCuCl/BaCO3-N2 with low-valence Cu+ species facilitated the formation of electrophilic oxygen species that preferentially attacked the CC bond of propylene, resulting in the production of PO instead of attacking the C–H bond for the formation of byproduct. This study provides a clear example of using supported bimetal catalysts to achieve propylene epoxidation and offers guidance for selecting supports for supported nanoclusters as an efficient catalyst.

materials science, multidisciplinary,nanoscience & nanotechnology
Template-free Method to Prepare Porous Cu-containing Nanotubes with a Good Catalytic Performance for Styrene Epoxidation

Chenhui Hu,Lihong Zhang,Junfeng Zhang,Liyuan Cheng,Zheng Zhai,Jing Chen,Wenhua Hou

DOI: https://doi.org/10.1016/j.apsusc.2014.01.137

IF: 6.7

2014-01-01

Applied Surface Science

Abstract:Cu-containing nanotubes with a large surface area and pore volume were prepared by using nanoscrolls derived from K4Nb6O17 as a support and a subsequent thermal transformation of Cu-containing nanoscrolls into Nb2O5 nanotubes. The method is facile and template-free. The catalytic performance of the resulted Cu-containing nanotubes was evaluated for styrene epoxidation in the presence of tert-butyl hydroperoxide (TBHP) and H2O2, respectively. It was found that Cu-containing nanotubes displayed a relative good catalytic performance with a styrene oxide (SO) selectivity of 46.9% by TBHP and a much higher SO selectivity of 94.6% by H2O2. Two possible mechanisms were put forward to explain the different catalytic behaviors in the two types of oxidation systems. Because of the thermal transformation of nanoscrolls into nanotubes, nanoscrolls may be a new kind of promising support for the design and assembly of novel heterogeneous catalysts.
Preparation and Catalytic Olefin Epoxidation Properties of Carbon Nanotube/Polyoxometalates/Polypyrrole Composite Catalyst

Gao Hongcheng,Wang Zhenlu,Niu Guiling,Wen Shoudong,Wu Xiaonan,Zhang Xiaofei,Su Pengchen,Yan Xin,Qi Qiang,Gao Binbin

DOI: https://doi.org/10.7503/cjcu20160926

2017-01-01

Abstract:The PPy-PMo@CNTs composite materials were prepared via in situ polymerization with PMo, polypyrrole and carbon nanotube. The multiple characteristics of FTIR, SEM and TEM were used to characterize the catalysts. The results indicated that both PMo and polypyrrole were incorporated into the CNTs, and polypyrrole formed a layer on the surface of CNTs. N-2-adsorption results showed that PPy-PMo@CNTs obtain uniform mesoporous structure. The catalytic properties of PPy-PMo@CNTs were investigated in olefin epoxidation using H2O2 as the oxidant and acetonitrile as the solvent. The catalytic reaction results indicated that PPy-PMo@CNTs exhibits good catalytic activity at temperature of 60 degrees C when reaction substrate was 1 mmol and dosage of catalyst was 10 mg. Leaching and recycling experiments exhibited that PPy-PMo@CNTs have excellent stability, there was no obvious decrease of cyclooctene conversion after five reaction cycles under identical reaction conditions, and the conversion of cyclooctene retains around 65%.
Synthesis of CoFe Prussian blue analogue/carbon nanotube composite material and its application in the catalytic epoxidation of styrene

W. Shen,Ningfen Wang,Jian Fang,Qianqian Wang,Sifa He,Jihua Zhao

DOI: https://doi.org/10.1039/C5NJ03618F

2016-04-11

Abstract:The CoFe Prussian blue analogue/carbon nanotube composite material was synthesized and applied to catalyze the reaction of epoxidation of styrene. Carbon nanotubes were used as catalyst carriers. The catalytic activity of this composite material was superior to the CoFe Prussian blue analogue and carbon nanotubes taken independently. The composite material indeed had a larger surface area and a better particle dispersion than the bulk Prussian blue analogue. Kinetic studies were also carried out. The reaction activation energy of the CoFe Prussian blue analogue alone was equal to 75.83 kJ mol−1, while the reaction activation energy of the composite material was equal to 35.67 kJ mol−1. A first order reaction with respect to the concentrations of catalyst, styrene and tert-butyl hydroperoxide was also determined. The composite catalyst could be reused for up to five cycles without any significant loss in conversion and selectivity.

Chemistry,Engineering,Materials Science
In Situ FT-IR Study on the Direct Gas Phase Epoxidation of Propylene over Ag-MoO3 Catalyst

Jin Guo-Jie,Guo Yang-Long,Liu Xiao-Hui,Yao Wei,Guo Yun,Wang Yun-Song,Yuan Fang,Lu Guan-Zhong

DOI: https://doi.org/10.1016/s1872-1508(06)60034-x

2006-01-01

Acta Physico-Chimica Sinica

Abstract:The Ag-MoO3 catalyst for direct gas phase epoxidation of propylene was prepared, and in situ FT-IR technology was used to study the adsorption and reaction behavior of propylene, propylene oxide (PO), and the gaseous mixture of propylene and oxygen on the surfaces of Ag and Ag-MoO3 catalysts. The results indicate that on using single Ag catalyst the selectivity to PO is very low, and Ag-MoO3 is an efficient catalyst for the direct epoxidation of propylene using molecular oxygen as oxidant. The studies of in situ FT-IR show that no chemical reaction occurs, within the range of the experimental temperatures, when propylene is adsorbed on the surface of Ag or Ag-MoO3 catalysts, whereas the open-ring, polymerization, and coking of PO adsorbed on the Ag or Ag-MoO3 catalysts can occur at a higher temperature. The presence of MoO3 in the Ag-MoO3 catalyst can inhibit the open-ring and deep reactions of PO to some extent, despite decreasing its activity, which leads to an increase in the selectivity of PO. The lower reaction temperature and shorter contact time are favorable to inhibit the deep reaction of PO on the surface of the catalyst.
Cobalt-Doped MnO2 Nanofibers for Enhanced Propane Oxidation

Long Chen,Jiancai Ding,Jingbo Jia,Rui Ran,Cheng Zhang,Xiping Song

DOI: https://doi.org/10.1021/acsanm.9b00818

IF: 6.14

2019-01-01

ACS Applied Nano Materials

Abstract:We develop a host guest strategy to construct cobalt-doped MnO2 nanofibers with dual reactive sites, which exhibit high activity for propane deep oxidation. After the incorporation of cobalt (the actual molar ratio of Co/Mn up to 0.15), no distinct changes of crystal structure and morphology of MnO2 nanofibers were observed, as evidenced by X-ray diffraction and transmission electron microscopy. The optimized MnCo0.2 nanofibers possessed the advantages of Mn and Co and exhibited the propane conversion of 50% (T-50) and 90% (T-90) at 205 and 223 degrees C, respectively. The Co-related species is more responsible for reducing the light-off temperature (T-50), whereas the Mn-related species helps more to decrease complete oxidation temperature (T-90). Furthermore, the in situ diffuse reflectance infrared Fourier transform spectroscopy results revealed the roles of Co-related species and Mn-related species during propane adsorption and oxidation. The finding demonstrates the win-win effect of two active oxides and provides a solution for developing highly efficient propane oxidation catalysts.
Preparation of Ag-MoO3/Molecular Sieves Catalysis for Vapor-phase Epoxidation of Propylene to Propylene Oxide

孔维颖,郭杨龙,金国杰,刘晓晖,卢冠忠

DOI: https://doi.org/10.3969/j.issn.0441-3776.2003.10.002

2003-01-01

Abstract:In this paper, a series of catalysts, Ag and MoO3 as active components supported on various molecular sieves, were prepared by impregnation methods. Vapor-phase epoxidation of propylene to propylene oxide (PO) over the above catalysts were investigated by the microreactor-GC apparatus, with molecular oxygen as oxidant and no inhibitors in the feedstock. It showed that the Ag content, supports, promoter and reaction temperature affected obviously the epoxidation performance of the catalysts. Among the above catalysts, the Ag-MoO3/MCM-41 catalyst achieved the best epoxidation performance, such as that at 300°C the selectivity of PO and conversion of oxygen were 55.4% and 2.2% respectively. Besides the selectivity of PO over the 20% Ag5%MoO3/NaZSM-5 catalyst, with 0.1% NaCl as the promoter under 350°C, increases from 9.1% to 34.7%.
Facile Synthesis of Mn-Fe/CeO2 Nanotubes by Gradient Electrospinning and Their Excellent Catalytic Performance for Propane and Methane Oxidation.

Yihong Xiao,Weitao Zhao,Kai Zhang,Yangyu Zhang,Xiuyun Wang,Tianhua Zhang,Xiangwei Wu,Chongqi Chen,Lilong Jiang

DOI: https://doi.org/10.1039/c7dt03484a

IF: 4

2017-01-01

Dalton Transactions

Abstract:Nanotubes have been the focus of vital efforts in the catalysis community because of their unique properties. However, owing to the limitations of synthetic methods, most multi-element oxides have rarely been fabricated. In this study, we design a gradient electrospinning method for the controllable synthesis of Mn-Fe/CeO2 nanocatalysts and their application in the combustion of propane and methane. The strategy is rational, and the nanostructure of Mn-Fe/CeO2 can be tuned by simply adjusting the weight ratio of polyvinyl pyrrolidone (PVP)/polyacrylonitrile (PAN) during the electrospinning process. Benefitting from its unique structural feature, propane and methane conversions in hollow tubular Mn-Fe/CeO2-P1 (mPVP : mPAN = 1 : 1) are more than 90% at 382 and 411 °C, respectively. The superior propane oxidation performance in Mn-Fe/CeO2-P1 is associated with its hollow tubular structure, high surface oxygen vacancies and excellent low-temperature reducibility.
Propene Epoxidation with Molecular Oxygen: Advancements from Nanoparticle to Single‐atom Catalysts

Qiuming He,Dong Lin,Defu Yin,Chaohe Yang,De Chen,Xiang Feng

DOI: https://doi.org/10.1002/smo.20240025

2024-01-01

Abstract:AbstractPropylene oxide plays a pivotal role as an organic synthesis intermediate, boasting extensive downstream applications and promising market prospects. Propene epoxidation via molecular oxygen has garnered considerable attention due to its cost‐effectiveness, environmental friendliness, ease of operation, and straightforward product separation. This paper provides an in‐depth exploration of recent advancements, ranging from nanoparticle to Single‐atom catalysts (SACs), in the context of propene epoxidation using molecular oxygen. Conventional nanoparticle catalysts, including those based on Ag, Cu, and other metals, are examined with regard to their contributions to support effects, electron effects, or crystal‐plane effects within the mechanistic investigation. Furthermore, emerging SACs (specifically Mo, Cu, and Co) are discussed in terms of synthesis strategies, characterization methods, and mechanism studies. This comprehensive review sheds new light on design strategies, relevant characterizations, and thorough mechanism investigations aimed at fostering the development of efficient catalysts, thereby expediting progress in the industrial implementation of propene epoxidation.
Direct Propylene Epoxidation with Molecular Oxygen over Cobalt-Containing Zeolites

Weijie Li,Guangjun Wu,Wende Hu,Jian Dang,Chuanming Wang,Xuefei Weng,Ivan da Silva,Pascal Manuel,Sihai Yang,Naijia Guan,Landong Li

DOI: https://doi.org/10.1021/jacs.2c00792

IF: 15

2022-02-22

Journal of the American Chemical Society

Abstract:Direct propylene epoxidation with molecular oxygen is a dream reaction with 100% atom economy, but aerobic epoxidation is challenging because of the undesired over-oxidation and isomerization of epoxide products. Herein, we report the construction of uniform cobalt ions confined in faujasite zeolite, namely, Co@Y, which exhibits unprecedented catalytic performance in the aerobic epoxidation of propylene. Propylene conversion of 24.6% is achieved at propylene oxide selectivity of 57% at 773 K, giving a state-of-the-art propylene oxide production rate of 4.7 mmol/gcat/h. The catalytic performance of Co@Y is very stable, and no activity loss can be observed for over 200 h. Spectroscopic analyses reveal the details of molecular oxygen activation on isolated cobalt ions, followed by interaction with propylene to produce epoxide, in which the Co2+-Coδ+-Co2+ (2 < δ < 3) redox cycle is involved. The reaction pathway of propylene oxide and byproduct acrolein formation from propylene epoxidation is investigated by density functional theory calculations, and the unique catalytic performance of Co@Y is interpreted. This work presents an explicit example of constructing specific transition-metal ions within the zeolite matrix toward selective catalytic oxidations.

chemistry, multidisciplinary
Gas Phase Selective Propylene Epoxidation over La2O3-Supported Cubic Silver Nanoparticles

Bin Yu,Tugce Ayvali,Zhiqiang Wang,Xue-Qing Gong,Abdulaziz Bagabas,Edman Tsang

DOI: https://doi.org/10.1039/c9cy00567f

IF: 6.177

2019-01-01

Catalysis Science & Technology

Abstract:Herein, we present a systematic study on geometric and electronic effects exhibited by exposed Ag faceted nanoparticles and supports in the direct catalytic propylene epoxidation from O-2 and propylene. Ag nanoparticles were first synthesised with well-defined morphologies (nanocubes or nanospheres) before they were placed on various supports, including conventional Al2O3 and a series of lanthanide oxides (Ln(2)O(3)). Results showed that faceted Ag nanoparticles and the oxide supports on their own are unable to deliver decent propylene oxide (PO) selectivity. However, their interfaces such as Ag nanocubes/La2O3 can dramatically enhance PO conversion (11.6%) and selectivity (51%) under dilute gas stream (3.33% C3H6 : 1.67% O-2 : 95% He) at atmospheric pressure and 270 degrees C temperature. It is envisaged that the exposed (001) polar face on La2O3 with a higher density of oxygen vacancies facilitates dioxygen dissociation and the dissociated active oxygen is transferred to the Ag(100) surface at the interface where longer Ag-Ag interatomic distances prevent the removal of gamma-H of propylene towards combustion, thus accounting for higher PO selectivity. These findings may lead to the design of new supported silver catalysts for environmentally-benign propylene oxide production.

Ferric Molybdate Nanotubes Synthesized Based on the Kirkendall Effect and Their Catalytic Property for Propene Epoxidation by Air

Preparation, Characterization, and Properties of Ferric Molybdate Nanotubes for Propene Epoxidation by Air

Selective Oxidation of Propene Catalyzed by Modified Ferric Molybdate with Hollow Structure

Preparation of Sno2/Graphene Nanocomposite and Its Application to the Catalytic Epoxidation of Alkenes with H2o2

Epoxidation of propylene to propylene oxide catalyzed by μ-oxo-bismetalloporphyrins

Preparation of organic-inorganic hybrid Fe-MoOx/polyaniline nanorods as efficient catalysts for alkene epoxidation

Fine cubic Cu<sub>2</sub>O nanocrystals as highly selective catalyst for propylene epoxidation with molecular oxygen

Selective and Efficient Olefin Epoxidation by Robust Magnetic Mo Nanocatalysts

Gas phase selective propylene epoxidation over La<sub>2</sub>O<sub>3</sub>-supported cubic silver nanoparticles

Preparation of Γ-Fe2o3@c@moo3 Core/shell Nanocomposites As Magnetically Recyclable Catalysts for Efficient and Selective Epoxidation of Olefins

Supported AgCuCl Nanoclusters as Bimetal Catalysts for Propylene Epoxidation with Molecular Oxygen

Template-free Method to Prepare Porous Cu-containing Nanotubes with a Good Catalytic Performance for Styrene Epoxidation

Preparation and Catalytic Olefin Epoxidation Properties of Carbon Nanotube/Polyoxometalates/Polypyrrole Composite Catalyst

Synthesis of CoFe Prussian blue analogue/carbon nanotube composite material and its application in the catalytic epoxidation of styrene

In Situ FT-IR Study on the Direct Gas Phase Epoxidation of Propylene over Ag-MoO3 Catalyst

Cobalt-Doped MnO2 Nanofibers for Enhanced Propane Oxidation

Preparation of Ag-MoO3/Molecular Sieves Catalysis for Vapor-phase Epoxidation of Propylene to Propylene Oxide

Facile Synthesis of Mn-Fe/CeO2 Nanotubes by Gradient Electrospinning and Their Excellent Catalytic Performance for Propane and Methane Oxidation.

Propene Epoxidation with Molecular Oxygen: Advancements from Nanoparticle to Single‐atom Catalysts

Direct Propylene Epoxidation with Molecular Oxygen over Cobalt-Containing Zeolites

Gas Phase Selective Propylene Epoxidation over La2O3-Supported Cubic Silver Nanoparticles