Use of Different Carbon Sources in Cultivation of Recombinant Pichia Pastoris for Angiostatin Production
JL Xie,QW Zhou,D Peng,RB Gan,Y Qin
DOI: https://doi.org/10.1016/j.enzmictec.2004.06.010
IF: 3.705
2005-01-01
Enzyme and Microbial Technology
Abstract:To improve the growth of recombinant Pichia pastoris with a phenotype of MutS and expression of angiostatin, the effects of glycerol, sorbitol, acetate and lactic acid which were, respectively, added together with methanol in the expression phase, were studied in a 5-l fermentor. Methanol concentration was automatically controlled at 5g/l by a methanol monitor and control system, while the feeding of the other carbon source was manually adjusted. The angiostatin production level was 108mg/l when glycerol was added at an initial rate of 2.3g/h and gradually increased to 9.9g/h within an induction period of 96h. The angiostatin concentration was 141mg/l as sorbitol was used, while only 52mg/l were obtained on acetate. The highest angiostatin production of 191mg/l was achieved as lactic acid was used; whose feeding rate was gradually increased from 2.6 to 11.3g/h. Lactic acid accumulated during the induction phase and reached 6.3g/l at the end of fermentation. However, the accumulation of lactic acid did not interfere with angiostatin production, indicating that lactic acid to be a non-repressive carbon source. The average productivity and specific productivity of angiostatin obtained on lactic acid and methanol were, respectively, 2.96 and 0.044mg/(gh), 1.7- and 2.5-fold of those obtained in the fermentation fed with glycerol and methanol.