Abstract:Since the papyri, cellulose has played a significant role in human culture, especially as paper. Nowadays, this ancient product has found new applications in the expanding sector of bioactive paper. Simple paper-based detection devices such as lateral flow immunoassays (LFIAs) are inexpensive, rapid, userfriendly and therefore highly promising for providing resource-limited settings with point-of-care diagnostics. Recently, paper-based biosensing technology has trended towards three-dimensional microfluidic devices and multiplexed assay platforms. Yet, many multiplexed paper-based biosensors implement methods incompatible with the conventional LFIA carrier material: nitrocellulose. It thus tends to be replaced by pure cellulose. This major material change implies to undertake a covalent immobilization of biomolecules on cellulose which preserves their biological activity. Furthermore, the current global issues have stimulated the search for both ecologically and economically friendly (eco²-friendly) materials and processes. As a sustainable and affordable biopolymer, cellulose is an ideal material for developing diagnostic devices. However, the frame material is not the only aspect to consider. The whole device design and production, as well as the biosensing material immobilization or the non-sensing membranes treatment, should be as eco²-friendly as possible. Hence, the spatially controlled modification of cellulose surface seems crucial in the development of such devices since it enables to save expensive matter and to pattern surface properties. In any case, modification procedures should abide by the economic and ecological objectives aforementioned. In this perspective, three processes allowing easy, robust and sustainable modification of cellulose sheets were developed. All are environmentally friendly, simple, time and cost-saving, and versatile. The first procedure is a functionalization of cellulose membranes for covalent antibody immobilization. While cellulose chemical modification is usually operated under harsh conditions in organic solvents, the diazonium-based procedure developed was performed in water, at room temperature, in a single step. Paper sheets have thus been modified and bear different chemical functions which enable to graft biomolecules by common bioconjugate techniques and to perform LFIAs. The second is a chemical-free photoimmobilization procedure which allowed antibodies to be immobilized on cellulose without any photocoupling intermediate nor any biomolecule or substrate pretreatment. This immobilization technique was further combined to inkjet printing to localize the antibodies according to any pattern desired. Native antibodies have thus been printed and immobilized on paper sheets which therefore enable to perform LFIAs. Membranes’ performances were evaluated in terms of visual detection limit and challenged nitrocellulose performances. The third is a modification of cellulose membranes by polymer grafting. Unlike the two previous processes, this technique was developed in order to increase the functionality of the non-sensing cellulose parts of paper-based devices. Yet, it may be employed as another functionalization method for covalent antibody immobilization on cellulose. While cellulose graft copolymerization is usually performed through complex and expensive procedures, the diazonium-based approach employed was performed in water, at room temperature, in a short single step. Cellulose sheets have thus been grafted with several acrylic polymers, first globally through a dipping procedure and then locally by inkjet printing. All the strategies developed herein would be helpful to immobilize sensitive proteins on selected specific areas of cellulose sheets. More generally, these are powerful tools for easy and rapid modulation of cellulose surface properties according to complex designs, under soft and biocompatible conditions.

DNA Immobilization and Detection on Cellulose Paper Using a Surface Grown Cationic Polymer Via ATRP

A Fluorescently Labeled, Hyperbranched Polymer Synthesized from De-Atrp for the Detection of Dna Hybridization

A versatile method for functionalizing surfaces with bioactive glycans.

One-Step Surface Modification to Graft DNA Codes on Paper: The Method, Mechanism, and Its Application

Biofunctional paper via the covalent modification of cellulose

Poly(3,4-dihydroxyphenylalanine)-modified cellulose paper for the extraction of deoxyribonucleic acid by a laboratory-built automated extraction device

Simple strategy to functionalize polymeric substrates via surface-initiated ATRP for biomedical applications

Label-free, Background-Free Detection of Nucleic Acid with Immobilization-Free Heterogeneous Biosensor and One-Pot Hybridization Chain Reaction Amplification

Rapid localized cell trapping on biodegradable polymers using cell surface derivatization and microfluidic networking

High Specific Surface Gold Electrode on Polystyrene Substrate: Characterization and Application As DNA Biosensor.

Graft Copolymers Prepared by Atom Transfer Radical Polymerization (ATRP) from Cellulose

DNA/polyvinyl alcohol interpenetrating polymer network as stationary phase for thin layer chromatography.

Simple, biocompatible and robust modification of cellulose membranes for the eco²-friendly preparation of immunoassay devices

Immobilization of Oligonucleotides Onto Zirconia-Modified Filter Paper and Specific Molecular Recognition.

Filter paper grafted with epoxide-based copolymer brushes for activation-free peptide nucleic acid conjugation and its application for colorimetric DNA detection

Photoinduced Metal-Free Atom Transfer Radical Polymerization for the Modification of Cellulose with Poly(N-isopropylacrylamide) to Create Thermo-Responsive Injectable Hydrogels

Highly Transparent Cyclic Olefin Copolymer Film with a Nanotextured Surface Prepared by One-Step Photografting for High-Density DNA Immobilization.

Photonic crystals on copolymer film for label-free detection of DNA hybridization

DNA-Induced Assembly of Silver Nanoparticle Decorated Cellulose Nanofiber: A Flexible Surface-Enhanced Raman Spectroscopy Substrate for the Selective Charge Molecular Detection and Wipe Test of Pesticide Residues in Fruits

All-Aqueous SI-ARGET ATRP from Cellulose Nanofibrils Using Hydrophilic and Hydrophobic Monomers

Intelligent dual-responsive cellulose surfaces via surface-initiated ATRP.