Abstract:ZnO has long been considered as a model UVdriven photoanode for photoelectrochemical water splitting, but its performance has been limited by fast charge-carrier recombination, extremely poor stability in aqueous solution, and slow kinetics of water oxidation. These issues were addressed by applying a strategy of optimization and passivation of hydrothermally grown 1D ZnO nanowire arrays. The length and diameter of bare ZnO nanowires were optimized by varying the growth time and precursor concentration to achieve optimal photoelectrochemical performance. The addition of earth-abundant cobalt phosphate (Co-Pi) and nickel borate (Ni-B) oxygen evolution catalysts onto ZnO nanowires resulted in substantial cathodic shifts in onset potential to as low as about 0.3 V versus the reversible hydrogen electrode (RHE) for Ni-B/ZnO, for which a maximum photocur- rent density of 1.1 mAcm(-2) at 0.9V (vs. RHE) with applied bias photon-to-current efficiency of 0.4% and an unprecedented near-unity incident photon-to-current efficiency at 370 nm. In addition the potential required for saturated photocurrent was dramatically reduced from 1.6 to 0.9V versus RHE. Furthermore, the stability of these ZnO nanowires was significantly enhanced by using Ni-B compared to Co-Pi due to its superior chemical robustness, and it thus has additional functionality as a stable protecting layer on the ZnO surface. These remarkable enhancements in both photocatalytic activity and stability directly address the current severe limitations in the use of ZnO-based photoelectrodes for watersplitting applications, and can be applied to other photoanodes for efficient solar-driven fuel synthesis.

ZnO-ZnGa2O4 core-shell nanowire array for stable photoelectrochemical water splitting.

ZnO–ZnGa<sub>2</sub>O<sub>4</sub>core–shell nanowire array for stable photoelectrochemical water splitting

A Conductive ZnO:Ga/ZnO Core-Shell Nanorod Photoanode for Photoelectrochemical Water Splitting

Si/ZnO core-shell nanowire arrays for photoelectrochemical water splitting

High density Si/ZnO core/shell nanowire arrays for photoelectrochemical water splitting

Hierarchical ZnO Nanorod/znfe2o4 Nanosheet Core/shell Nanoarray Decorated with PbS Quantum Dots for Efficient Photoelectrochemical Water Splitting

Cobalt Phosphate-Modified (GaN) 1– x (ZnO) x /GaN Branched Nanowire Array Photoanodes for Enhanced Photoelectrochemical Performance

Vertically Aligned ZnO–ZnGa 2 O 4 Core–shell Nanowires: from Synthesis to Optical Properties

High-performance N-Si/α-fe2o3 Core/shell Nanowire Array Photoanode Towards Photoelectrochemical Water Splitting.

InGaN/Cu2O Heterostructure Core-Shell Nanowire Photoanode for Efficient Solar Water Splitting

Nitrogen-doped ZnO Nanowire Arrays for Photoelectrochemical Water Splitting.

Earth-Abundant Oxygen Evolution Catalysts Coupled Onto Zno Nanowire Arrays for Efficient Photoelectrochemical Water Cleavage

Synthesis of WO3@ZnWO4@ZnO-ZnO Hierarchical Nanocactus Arrays for Efficient Photoelectrochemical Water Splitting

Hierarchical Nanowire Arrays Based On Carbon Nanotubes And Co3o4 Decorated Zno For Enhanced Photoelectrochemical Water Oxidation

Enhanced charge separation of NiO/ZnO P-N heterojunction nanorod arrays for photoelectrochemical water splitting

Effective Silicon Nanowire Arrays/wo3 Core/shell Photoelectrode for Neutral Ph Water Splitting

Hydrophilic Polypyrrole and G-C3n4 Co-Decorated ZnO Nanorod Arrays for Stable and Efficient Photoelectrochemical Water Splitting

ZnO Nanowire Arrays with in Situ Sequentially Self-Assembled Vertically Oriented CdS Nanosheets As Superior Photoanodes for Photoelectrochemical Water Splitting

Phosphatized GaZnInON nanocrystals with core-shell structures for efficient and stable pure water splitting via four-electron photocatalysis

Crystalline ZnO/ZnSxSe1−xcore–shell Nanowire Arrays for Efficient Visible-Light Photoelectrocatalysis

1D Alignment of ZnO@ZIF-8/67 Nanorod Arrays for Visible-Light-driven Photoelectrochemical Water Splitting