Abstract:The production of thermoluminescence (TL) dosimeters fabricated from B2O3-Caf2-Al2O3-SiO2 doped with Cu and Pr for use in diagnostic radiology is the main goal of this research. The TL samples were synthesized via the melt-quench technique processed by melting the mixture at 1200 °C for 1 h, and, after cooling, the sample thus created was divided into two samples and retreated by heating for 2 h (referred to as TLV30) and for 15 h (referred to as TLV17). SEM and EDS analyses were performed on the TL samples to confirm the preparation process and to investigate the effects of irradiation dosimetry on the TL samples. Furthermore, the TL samples were irradiated with γ-rays using a 450 Ci 137Cs irradiator and variable X-ray beams (5–70 mGy). Two important diagnostic radiology applications were considered: CT (6–24 mGy) and mammography (2.72–10.8 mGy). Important dosimetric properties, such as the glow curves, reproducibility, dose–response linearity, energy dependence, minimum dose detectability and fading, were investigated for the synthetized samples (TLV17 and TLV30), the results of which were compared with the Harshaw TLD-100. The TLV17 dosimeter showed higher sensitivity than TLV30 in all applied irradiation procedures. The dose–response linearity coefficients of determination R2 for TLV17 were higher than TLD-100 and TLV30 in some applications and were almost equal in others. The reproducibility results of TLV17, TLV30 and TLD-100 were less than 5%, which is acceptable. On the other hand, the results of the fading investigations showed that, in general, TLV17 showed less fading than TLV30. Both samples showed a significant decrease in this regard after the first day, and then the signal variation became essentially stable though with a slight decrease until the eighth day. Therefore, it is recommended to read the TL dosimeters after 24 h, as with TLD-100. The SEM images confirmed the existence of crystallization, whilst the EDS spectra confirmed the presence of the elements used for preparation. Furthermore, we noticed that TLV17 had grown dense crystals that were larger in size compared to those of TLV30, which explains the higher sensitivity in TLV17. Overall, despite the fading, TLV17 showed greater radiation sensitivity and dose–response linearity compared with TLD-100. The synthetized TL samples showed their suitability for use as dosimeters in diagnostic radiology radiation dosimetry.

Preparation and Characterization of Poly(vinyl Alcohol) Hydrogel Based Three-Dimensional Dosimeter for Radiotherapy.

Thermal Stability of Optically Transparent Alpha-Zirconium Phosphate/Poly(methyl Methacrylate) Nanocomposites with High Particle Loading

Room temperature photoluminescence from Zr4+-doped sol–gel silica

High-resolution 3D Radiochromic Hydrogel Photonic Crystal Dosimeter for Clinical Radiotherapy

Rare-earth doped radioluminescent hydrogel as a potential phantom material for 3D gel dosimeter

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Experimental evaluation of electrospun ZnO/WO 3 /PVA-coated glass nanocomposites for a potential radiation dosimetry application

Development of Ag-Doped ZnO Thin Films and Thermoluminescence (TLD) Characteristics for Radiation Technology

Photoluminescence and thermoluminescence dosimetry properties of Ag/Y co‐doped ZnO nanophosphor for radiation measurements

A Study on Fricke-Pva-Xylenol Orange Hydrogel Dosimeter for E-Beam Radiotherapy

Investigation of the potential of electrospun n-ZnO/n-WO3/PVA-coated glass with varying n-ZnO wt% as promising thin-film dosimetry

Photoluminescence of nanometer zirconia powders

Dosimetric Study of Heat-Treated Calcium–Aluminum–Silicon Borate Dosimeter for Diagnostic Radiology Applications

Tunable Luminescence In Monodisperse Zirconia Spheres

Effects of calcination treatments on phases and properties of (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Zr2O7/YSZ mixture, and of pressure on photoluminescence emission of calcined mixture

Preparation and characterization of novel Sulfosalicylic acid-Ferrous-PVA hydrogel as a 3D dosimeter

Dose Response and Stability of Silicone-Based Deformable Radiochromic Dosimeters (flexydos3d) Using Spectrophotometer and Flatbed Scanner

Time-resolved observation of DHR123 nano-clay radio-fluorogenic gel dosimeters by photoluminescence-detected pulse radiolysis

Three-dimensional radiation dosimetry based on optically-stimulated luminescence

Novel Sm3+ doped BaZn2(PO4)2 glass-ceramic for optically stimulated luminescence dosimetry

Optically stimulated luminescence of Dy3+-doped NaCaPO4 glass-ceramics