Abstract:Ball-and-socket disc prostheses are the leading type of artificial disc replacement (ADR) and are typically used to treat degenerative cervical spine instability. Previous publications focused on the influence of different ProDisc-C design parameters in view of biomechanics. However, more beneficial data could be gathered if the implant was implanted prior to testing. Therefore, this study aimed to estimate the effect of different ProDisc-C arthroplasty designs and alignments when implanted at the C5-6 segment. This research can provide advice on the design of artificial discs as well as optimal placement. The geometry of the vertebrae was developed based on computed tomography (CT) images of a 32-year-old healthy male (170 cm height and 68 kg weight) with a slice thickness of 0.625 mm. A finite element (FE) model of intact C5-C6 segments including vertebrae and disc was developed and validated. A ball-and-socket artificial disc prosthesis model (ProDisc-C, Synthes) was implanted into the validated FE model. The curvature of the ProDisc-C prosthesis as well as the implanted position was varied. All models were loaded with a 74 N compressive force and pure moments of 1.8 Nm in flexion-extension, bilateral bending and axial torsion. The radius of the artificial disc influenced the ROM, facet joint force and capsule ligament tension only in flexion, while the position influenced these aspects in all loading conditions. The disc with a 6 mm radius had a greater ROM in flexion, and lower stress on the polyethylene (PE) insert without apparent stress concentrations, but it had a greater facet joint force and ligament tension compared to other radii. For all the designs, the implant position in the anterior-posterior direction had a significant influence on the disc biomechanics. Disc design and surgical procedure, such as implantation position, are important factors in postoperative rehabilitation, especially regarding the ROM in flexion/extension and implant stress. Thus, a suitable disc design should consider preserving an adequate range of motion (ROM) as well as a moderate facet joint force or stress, and proper implant positioning along the anterior-posterior direction should be monitored.

An Individualized and Bioactive Artificial Intervertebral Disc.

Bioinspired Intervertebral Disc with Multidirectional Stiffness Prepared via Multimaterial Additive Manufacturing

Design principle and research development of artificial lumbar disc prosthesis

Bio-Mechanical behaviour of artificial intervertebral disc in lumbar spine

Biomimetic Design of 3D Fibrous Mesh Reinforced Hydrogel Replicating the Form and Function of the Intervertebral Disc

3D-Printed Auxetic-Structured Intervertebral Disc Implant for Potential Treatment of Lumbar Herniated Disc

Finite Element Analysis and Computer Aided Tissue Engineering Design of a Replacement Lumbar Intervertebral Disc

Fiber‐Dependent 3D Anisotropic Stiffness‐Tunable Biomimetic Intervertebral Disc via Multi‐Material Additive Manufacturing

In Vitro Construction and Biological Properties of New Tissue-Engineered Intervertebral Discs

Total Disc Replacement Devices: Structure, Material, Fabrication, and Properties

Toward a mechanically biocompatible intervertebral disc: Engineering of combined biomimetic annulus fibrosus and nucleus pulposus analogs.

Advances and Prospects in Biomaterials for Intervertebral Disk Regeneration

An Artificial PVA-BC Composite That Mimics the Biomechanical Properties and Structure of a Natural Intervertebral Disc

Engineering a Biomimetic Integrated Scaffold for Intervertebral Disc Replacement.

Potential Application of Entangled Porous Titanium Alloy Metal Rubber in Artificial Lumbar Disc Prostheses

Customized Composite Intervertebral Disc Scaffolds by Integrated 3D Bioprinting for Therapeutic Implantation

Biomimetic Microstructural Materials for Intervertebral Disk Degeneration Repair

Materials and design concepts for an intervertebral disc spacer. II. Multidurometer composite design

BIOMECHANICAL ANALYSIS OF DIFFERENT PRODISC-C ARTHROPLASTY DESIGNS AFTER IMPLANTATION: A NUMERICAL SENSITIVITY STUDY

Reverse Reconstruction and Bioprinting of Bacterial Cellulose-Based Functional Total Intervertebral Disc for Therapeutic Implantation.

Construction of Biomimetic Artificial Intervertebral Disc Scaffold Via 3D Printing and Electrospinning.