Abstract:Electrospinning is a commonly used and versatile method to produce scaffolds (often biodegradable) for 3D tissue engineering.(1, 2, 3) Many tissues in vivo undergo biaxial distension to varying extents such as skin, bladder, pelvic floor and even the hard palate as children grow. In producing scaffolds for these purposes there is a need to develop scaffolds of appropriate biomechanical properties (whether achieved without or with cells) and which are sterile for clinical use. The focus of this paper is not how to establish basic electrospinning parameters (as there is extensive literature on electrospinning) but on how to modify spun scaffolds post production to make them fit for tissue engineering purposes--here thickness, mechanical properties and sterilisation (required for clinical use) are considered and we also describe how cells can be cultured on scaffolds and subjected to biaxial strain to condition them for specific applications. Electrospinning tends to produce thin sheets; as the electrospinning collector becomes coated with insulating fibres it becomes a poor conductor such that fibres no longer deposit on it. Hence we describe approaches to produce thicker structures by heat or vapour annealing increasing the strength of scaffolds but not necessarily the elasticity. Sequential spinning of scaffolds of different polymers to achieve complex scaffolds is also described. Sterilisation methodologies can adversely affect strength and elasticity of scaffolds. We compare three methods for their effects on the biomechanical properties on electrospun scaffolds of poly lactic-co-glycolic acid (PLGA). Imaging of cells on scaffolds and assessment of production of extracellular matrix (ECM) proteins by cells on scaffolds is described. Culturing cells on scaffolds in vitro can improve scaffold strength and elasticity but the tissue engineering literature shows that cells often fail to produce appropriate ECM when cultured under static conditions. There are few commercial systems available that allow one to culture cells on scaffolds under dynamic conditioning regimes--one example is the Bose Electroforce 3100 which can be used to exert a conditioning programme on cells in scaffolds held using mechanical grips within a media filled chamber.(4) An approach to a budget cell culture bioreactor for controlled distortion in 2 dimensions is described. We show that cells can be induced to produce elastin under these conditions. Finally assessment of the biomechanical properties of processed scaffolds cultured with or without cells is described.

Electrospinning of Microbial Polyester for Cell Culture

Precise Printing of Microfiber Scaffold with Gelatin Methacryloyl (gelma)/polyethylene Oxide (PEO) Bioink

The Electrospinning and Its Cytocompatibility of Poly(Butylene Carbonate)

Cell proliferation on PVA/sodium alginate and PVA/poly(γ-glutamic acid) electrospun fiber

Coaxial Electrospinning Biopolymer With Living Cells

Influence of Electrospinning Parameters on the Morphology of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fibrous Membranes and Their Application as Potential Air Filtration Materials

Electrospinning of Gelatin Fibers and Gelatin/Pcl Composite Fibrous Scaffolds

Fibroblast culture on poly(L-lactide-co-ɛ-caprolactone) an electrospun nanofiber sheet

Wet Electrospun Alginate/gelatin Hydrogel Nanofibers for 3D Cell Culture

Fabrication of gelatin nanofibrous scaffolds using ethanol/phosphate buffer saline as a benign solvent.

Potential of Electrospun Poly(3-hydroxybutyrate)/Collagen Blends for Tissue Engineering Applications

Effect of Solvent Properties on Electrospinning of Amphiphilic Polypeptides

Fabrication of poly (ϵ-caprolactone) microfiber scaffolds with varying topography and mechanical properties for stem cell-based tissue engineering applications

Nanofibrous Scaffold Prepared by Electrospinning of Poly(vinyl Alcohol)/gelatin Aqueous Solutions

Postproduction Processing of Electrospun Fibres for Tissue Engineering

Accelerating and Increasing Nano-Scaled Pore Formation on Electrospun Poly(3-Hydroxybutyrate-co-3-hydroxyvalerate) Fibers

Electrospinning of Polycaprolactone/Pluronic F127 Dissolved in Glacial Acetic Acid: Fibrous Scaffolds Fabrication, Characterization and in Vitro Evaluation.

Preparation and characterization of poly(hydroxybutyrate-co-hydroxyvalerate) nanofiber scaffolds using thermally induced phase separation method

Electrospinning preparation and surface hydrophilicity investigation of poly(lactic acid), poly(3-hydroxybutyrate-o-4-hydroxybutyrate), and poly(propylene carbonate) nanometer fiber membranes

Fabrication and Properties of Polycaprolactone/Poly(Butylene Succinate) Blends Based on Electrospinning

Emulsion Electrospinning as an Approach to Fabricate PLGA/Chitosan Nanofibers for Biomedical Applications