Abstract:The fabrication of bone scaffolds with interconnected porous structure, adequate mechanical properties, excellent biocompatibility and osteoinductivity presents a great challenge. Herein, a hybrid nanostructured hydroxyapatite-chitosan (HA-CS) composite scaffold has been fabricated according to the following steps: (i) the deposition of brushite-CS on a CS fibre porous scaffold by a dip-coating method; and (ii) the formation of a hybrid nanostructured HA-CS composite scaffold by the in situ conversion of brushite to HA using a bioinspired mineralization process. The hybrid HA-CS composite scaffold possesses three-dimensional (3D) interconnected pores with pore sizes of 30-80 μm. The HA rods with a length of ∼200 nm and width of ∼50 nm are perpendicularly oriented to the CS fibres. Interestingly, the abovementioned HA rods are composed of many smaller nanorods with a length of ∼40 nm and width of ∼10 nm oriented along the c-axis. The hybrid nanostructured HA-CS composite scaffold exhibits good mechanical properties with a compression strength of 9.41 ± 1.63 MPa and an elastic modulus of 0.17 ± 0.02 GPa, which are well-matched to those of trabecular bone. The influences of the hybrid HA-CS composite scaffold on cells have been investigated using human bone marrow stem cells (hBMSCs) as cell model and the CS fibre porous scaffold as the control sample. The hybrid HA-CS composite scaffold not only supports the adhesion and proliferation of hBMSCs, but also improves the osteoinductivity. The alkaline phosphatase activity and mineralization deposition on the hybrid HA-CS composite scaffold are higher than those on the CS fibre porous scaffold. Moreover, the hybrid HA-CS composite scaffold can promote the formation of new bone in rat calvarial defects as compared with the CS fibre porous scaffold. The excellent biocompatibility, osteoinductivity and mechanical properties suggest that the hybrid nanostructured HA-CS composite scaffold has great potential for bone tissue engineering.

[The Preparation of Series of the Controllable Degradation Coral-Hydroxyapatite (SCHA-200R) and the on Its Application As the Scaffold in Bone Tissue-Engineering].

Preparation and Performance of Silk Sericin/Hydroxyapatite Composite Bone Scaffold

Comparison between a series of controllable degradation coral-hydroxyapatite and Pro Osteon 500R from material aspect

A quantitative study on the biological degradation of a series of controllable absorbability coral-hydroxyapatite

Preparation and Characterization of Bionic Bone Structure Chitosan/hydroxyapatite Scaffold for Bone Tissue Engineering.

The preparation of a new hydroxyapatite and the study on its cytocompatibility]

Degradation pattern of porous CaCO3 and hydroxyapatite microspheres in vitro and in vivo for potential application in bone tissue engineering

Preparing Biomedical CaCO3/HA Composite with Oyster Shell

A New Tissue Engineering Scaffold-Biodegradable Coral-Hydroxyapatite

Characterization and structure study of surface exchanging coralline hydroxyapatite

Degradation and biocompatibility of porous nano-hydroxyapatite/polyurethane composite scaffold for bone tissue engineering

Degradation behavior and compatibility of micro, nanoHA/chitosan scaffolds with interconnected spherical macropores.

In Situ Transformation of Casein/Caco3 Microspheres into Hierarchical Hydroxyapatite Composite Microparticles and Its Cytocompatibility Evaluation

Two-step strategy for constructing hierarchical pore structured chitosan-hydroxyapatite composite scaffolds for bone tissue engineering

Biomimetic mineralized hierarchical hybrid scaffolds based on in situ synthesis of nano-hydroxyapatite/chitosan/chondroitin sulfate/hyaluronic acid for bone tissue engineering.

Preparation and in vitro investigation of chitosan/nano-hydroxyapatite composite used as bone substitute materials

Bone Tissue Engineering Scaffold Optimisation through Modification of Chitosan/Ceramic Composition

Hybrid Nanostructured Hydroxyapatite-Chitosan Composite Scaffold: Bioinspired Fabrication, Mechanical Properties and Biological Properties.

Experimental Study on Preparation and In-Situ Mineralization of Sodium Hyaluronate and Chitosan

Fabrication, chemical composition change and phase evolution of biomorphic hydroxyapatite

3D printing of fish-scale derived hydroxyapatite/chitosan/PCL scaffold for bone tissue engineering