Abstract:Coupled chemical and mechanical phenomena at electrode interfaces largely govern the reversibility and long term stability of lithium ion and lithium metal batteries. A well-known example in lithium ion batteries is the formation of the electrically insulating, ionically conductive, continuous solid electrolyte interface (SEI) on graphitic anodes, which passivates the electrode against further electrochemical reduction of the electrolyte. Unfortunately, this stable passivation does not occur in Si and Li metal anodes. High voltage cathodes are also prone to detrimental interfacial processes, resulting in electrolyte oxidation, gas formation, and transition metal dissolution. In response, a myriad of coating technologies has been developed to mitigate and control these interfacial phenomena and enable next-generation electrodes. These technologies must provide thin, conformal coatings over the entire electrochemically active surface area of the electrode; the coatings must also possess the requisite mechanical properties to accommodate volume dilation due to lithium insertion/extraction. This presentation will describe the development of conformal, compliant polymer thin film coatings for lithium battery electrodes. The polymer thin films are prepared by initiated chemical vapor deposition (iCVD), which provides exquisite control over film composition and morphology by facilitating heterogeneous free-radical polymerization of vinyl monomers with thickness precision on the order of 1 nm. Poly(1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane) (pV4D4) was deposited onto silicon thin film electrodes using iCVD. 25 nm-thick pV4D4 films on Si electrodes improved initial coulombic efficiency by 12.9% and capacity retention over 100 cycles by 64.9% relative to untreated electrodes. PV4D4 coatings also improved rate capabilities, enabling higher lithiation capacity at all current densities. Post-cycling FTIR and XPS showed that pV4D4 inhibited electrolyte reduction and altered the SEI composition, with enrichment in LiF. In another example, thin conformal coatings of perfluorinated polymer were deposited onto battery-grade Cu current collectors to function as an artificial solid electrolyte interface. The effect of the film thickness on Li cycling reversibility was characterized. By galvanostatically cycling Li in an asymmetric Li||Cu cell using 1M LiFSI in a 1:1 (v/v) mixture of dioxolane:dimethoxyethane at 30°C, it was shown that the average coulombic efficiency averaged over 50 cycles increased from 98.36% for bare, untreated Cu to 99.08% for Cu coated with 25 nm of the fluoropolymer. Moreover, the 25 nm coating suppressed interfacial impedance growth on the current collector; the resistance of the coated Cu was 40% lower than the untreated Cu after 100 cycles. The mechanism by which the polymer coating enhances coulombic efficiency and suppresses side reactions will be discussed, along with discussion of the performance in practical anode-free lithium metal batteries.

Conformal Coating of Thin Polymer Electrolyte Layer on Nanostructured Electrode Materials for Three-Dimensional Battery Applications

Tunable Conformal Electrodeposition of Ultra-Thin Polymeric Films for Electrolyte Interphases

Polyacrylonitrile-Polyvinyl Alcohol-Based Composite Gel-Polymer Electrolyte for All-Solid-State Lithium-Ion Batteries

(Invited) Lithium Battery Interfacial Engineering with Thin Conformal Polymer Coatings

Conformal coating of lithium-zinc alloy on 3D conducting scaffold for high areal capacity dendrite-free lithium metal batteries

Nanostructured Silicon-Carbon 3D Electrode Architectures for High-Performance Lithium-Ion Batteries

Core-Shell Sn-Ni-Cu-Alloy@Carbon Nanorods to Array as Three-dimensional Anode by Nano-electrodeposition for High-performance Lithium-ion Batteries.

Freestanding Three-Dimensional Core–shell Nanoarrays for Lithium-Ion Battery Anodes

Structural Optimization of 3D Porous Electrodes for High-Rate Performance Lithium Ion Batteries

Revisiting the Role of Physical Confinement and Chemical Regulation of 3D Hosts for Dendrite-Free Li Metal Anode

Comprehensive Enhancement Of Nanostructured Lithium-Ion Battery Cathode Materials Via Conformal Graphene Dispersion

Core–Shell Sn–Ni–Cu-Alloy@Carbon Nanorods to Array As Three-Dimensional Anode by Nanoelectrodeposition for High-Performance Lithium Ion Batteries

Development of three-dimensional flexible binder-free core-dual shell electrodes via atomic layer deposition of synergistic metal oxide nanocomposites for lithium-ion batteries

Three-Dimensional Macro-/Mesoporous C-TiC Nanocomposites for Dendrite-Free Lithium Metal Anode

Concurrently Approaching Volumetric and Specific Capacity Limits of Lithium Battery Cathodes via Conformal Pickering Emulsion Graphene Coatings

Three-dimensional Core@Shell Nano-Array Electrodes for Integrated Lithium-Ion Microbatteries

Nano-channel-based physical and chemical synergic regulation for dendrite-free lithium plating

High-Coulombic-Efficiency Lithium Metal Anodes Enabled by Three-Dimensional Lithiophilic Nanostructures with Multiscale Porosity

Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes.

Nanostructured Thin Film Electrode Materials for Lithium Ion Battery

Conformal Three-Dimensional Interphase of Li Metal Anode Revealed by Low Dose Cryo-Electron Microscopy