A New Approach for Active Removal of 5,000 Centistokes Silicone Oil Through 23-Gauge Cannula

Zong-M Song,Ding Chen,Zhi-S Ke,Rui-H Wang,Qin-M Wang,Fan Lu,Jia Qu

DOI: https://doi.org/10.1097/iae.0b013e3181e09841

2010-01-01

Abstract:Song, Zong-M MD, PHD; Chen, Ding MD, OD, MS; Ke, Zhi-S MD; Wang, Rui-H MD; Wang, Qin-M MD; Lu, Fan MD, OD, MS; Qu, Jia MD, MSEditor(s): Williams, George A Author Information

What problem does this paper attempt to address?

A Machine-Independent Method to Have Active Removal of 5,000 Centistokes Silicone Oil Using Plastic Infusion Tube and 23-Gauge Microcannulas

Zhaotian Zhang,Yantao Wei,Xintong Jiang,Suo Qiu,Shaochong Zhang

DOI: https://doi.org/10.1186/s12886-015-0103-2

IF: 2.086

2015-01-01

BMC Ophthalmology

Abstract:Background To describe one modified method of having machine-independent removal of 5,000 centistokes silicone oil through 23-gauge trocar-cannulas. Methods Consecutive patients with silicone oil tamponade for more than four months and with complete retinal reattachment were included. Two 23-gauge trocars were used to make sclerotomies while the microcannulas remained in situ for intravitreous infusion and silicone oil drainage. A short section of infusion tube was connected with a 10 ml syringe’s needle adapter. The other side was attached to the conjunctiva surface and covered the cannula’s cap inside to form a closed space for silicone oil drainage. The main outcomes were duration for complete removal of silicone oil and intra- and postoperative complications. Result There were totally twenty cases (20 eyes) included. The mean time for draining out the silicone oil was 4.54 ± 0.78 minutes. Intraoperatively, flute needle was introduced additionally in seven cases to achieve complete removal. No cases experienced postoperative visual acuity deterioration or refractory hypotony. No significant residual oil bubbles were observed. No retinal redetachment occurred throughout the follow-ups. Conclusion The modified method of using an infusion tube and 23-gauge trocar-cannulas can achieve quick and complete removal of high viscosity silicone oil.
A Modified Approach to Actively Remove High Viscosity Silicone Oil Through 23-Gauge Cannula

Zong-Ming Song,Xu-Ting Hu,Lei Wang,Zhi-Xiang Hu,Pei-Quan Zhao,Ding Chen

DOI: https://doi.org/10.18240/ijo.2016.09.10

IF: 1.645

2016-01-01

International Journal of Ophthalmology

Abstract:AIMTo report a simple approach to actively remove high viscosity silicone oil through a 23-gauge cannula via pars plana.METHODSForty-eight eyes of 48 patients underwent silicone oil (5700 centistokes) removal (SOR) were enrolled. A section of blood transfusion set was prepared to connect a standard 23-gauge cannula and vitrectomy machine. Silicone oil was removed with suction of 500-mm Hg vacuum through the cannula. Main outcome measures were SOR duration, number of sutured sites, intraocular pressure (IOP), best-corrected visual acuity (BCVA), and complications.RESULTSSilicone oil was successfully removed in all cases. The mean SOR time was 5.70±0.85min. Nine eyes (18.75%) needed suture partial sclerotomies. No intraoperative complications were noted. Transient hypotony (≤8 mm Hg) was seen in 3 eyes (6.25%) on postoperative day 1, but all resolved within 1wk. Retinal reattachment was achieved in all cases and no other postoperative complications were noted during 3-month following-up. BCVA at the final visit improved or stabilized in all patients comparing to the preoperative level.CONCLUSIONActive removal of high viscosity silicone oil through a 23-gauge instrument cannula jointed with blood transfusion set is a practical and reliable technique when considering two sides of efficacy and safety.
A novel design silicone oil removal cannula

Fevzi Akkan,Dincer Dinc

DOI: https://doi.org/10.3126/ajms.v12i12.39998

2021-12-01

Asian Journal of Medical Sciences

Abstract:Background: Silicone oil, which is one of the most commonly used endotamponades in vitreoretinal surgery, is removed after a certain period of time in most cases. In this study, we present our results with a unique cannula that provides effective and safe silicone oil removal. Aims and Objectives: To assess the aids and success of silicone oil removal with a novel 23-gauge cannula for the patients who underwent pars plana vitrectomy and silicone oil injection before. Materials and Methods: 72 eyes of 64 patients who operated by the same surgeon (FA) between May 2017 and May 2019 were involved in the study. The primary indications were proliferative diabetic retinopathy in 46 (63.9%) eyes and retinal detachment in 26 (36.1%) eyes. Phacoemulsification and intraocular lens implantation (23 eyes), membrane peeling (23 eyes), internal limiting membrane peeling (5 eyes), and argon laser endo-photocoagulation (37 eyes) performed in the same session. Furthermore, perfluorocarbon remnants aspirated in 9 eyes and 17 eyes needed suturing. Descriptive statistical analyses achieved by SPSS 10.5 statistical software. Results: The mean follow-up time was 11.7 + 2.5 months (between 3 and 23 months), and the mean age was 61.4 + 8.52 years (between 44 and 69 years). 1000 centistokes (cSt) silicone oil was removed from 61 (84.7%) eyes, and 5000 cSt silicone oil was removed from 11 (15.3%) eyes. The mean removal time was 2.04 + 0.1 min for 1000 cSt silicone oil and 5.11 + 0.3 min for 5000 cSt silicone oil. 4 re-detachment and 3 vitreous hemorrhage observed in follow-up period. Post-operative silicone oil remnants were not detected in any patient. Conclusion: The unique 23-gauge cannula provides silicone oil removal without any conjunctival cut-down and sclerotomy enlargement. Thus, it reduces the duration of surgery and post-operative recovery period.
New approaches to explanting high-viscosity silicone oil in retinal surgery—polyimide cannulas vs extraction sleeves vs a luer-trocar

Maximilian Hammer,Sonja Schickhardt,Donald Munro,Alexander Scheuerle,Ramin Khoramnia,Philipp Uhl,Gerd U. Auffarth

DOI: https://doi.org/10.1186/s40942-023-00481-w

2023-07-25

International Journal of Retina and Vitreous

Abstract:The removal of high-viscosity silicone oil in retinal surgery is time-intensive. In this laboratory and porcine eye study, we evaluated the efficiency of novel extraction techniques, namely shortened polyimide-cannulas, an extraction sleeve and an experimental luer-trocar system, for commercially available silicone oils.
Novel and Easy Techniques for 27-Gauge Silicone Oil Infusion and Removal

Zhaotian Zhang,Shaochong Zhang

DOI: https://doi.org/10.1007/s10792-018-0976-1

IF: 2.029

2018-01-01

International Ophthalmology

Abstract:To introduce novel and easy techniques for 27-gauge silicone oil (SO) infusion and removal.
Polysulphone Microcapsules Containing Silicone Oil for the Removal of Toxic Volatile Organics from Water.

Xingchu Gong,Yangcheng Lu,Jing Yu,Yang Zou,Guangsheng Luo

DOI: https://doi.org/10.1080/02652040701850763

2008-01-01

Journal of Microencapsulation

Abstract:Removal of volatile organic contaminants (VOCs) from water is an important task for environmental protection. Silicone oil has many merits but can not be directly applied in extraction of VOCs due to its high viscosity, which can negatively affect the mass transfer. Therefore a new purification method with extractant microcapsules has been developed in this work. Polysulphone microcapsules containing silicone oil were prepared successfully using a solvent evaporation method. The mass transfer performance was determined with toluene as the recovered component and with the prepared microcapsules as the separation agent. Extraction equilibrium could be reached in similar to 60 min. The maximum uptake of toluene was 24.5 mg g(-1) microcapsules. Microcapsules were reused four times and showed very good stability. Using microcapsules containing silicone oil as the separation agent, high and stable extraction capacity has been successfully achieved, especially without any phase dispersion and phase separation processes. It may be concluded that low energy will be required in the new separation process.
Passive silicone oil removal in 23-gauge transconjunctival vitrectomy

Osman Cekiç,Mehmet Cakir,O Faruk Yilmaz

DOI: https://doi.org/10.3928/15428877-20111017-01

Abstract:The authors introduce a feasible technique of passive silicone oil removal via the pars plana using 23-gauge transconjunctival vitrectomy microsurgery instruments. The procedure consists of three-port transconjunctival insertion of 23-gauge microcannulas. An inferotemporal cannula is connected to an infusion line and the height of the bottle is raised. The other two open ports are used to remove intravitreal silicone oil with an externally applied cotton swab. Passive silicone oil removal was conducted using the 23-gauge system in 46 phakic or pseudophakic eyes with silicone oil of both 1,000 (n = 39) and 5,000 centistokes (n = 7). A suture was placed for one of three sclera entry sites in 17 eyes. Cataract extraction with phacoemulsification was combined with passive silicone oil removal in 14 eyes. Transient hypotony was observed in 2 eyes. No retinal redetachment or other procedure-related complications were encountered.
Preparation of Microcapsules with Silicone Oil As Continuous Phase Using A Solvent Evaporation Method

Gong Xingchu,Lue Yangcheng,Xiang Ziying,Luo Guangsheng

DOI: https://doi.org/10.3724/sp.j.1105.2007.00775

2007-01-01

Acta Polymerica Sinica

Abstract:This paper presents a solvent evaporation method with silicone oil(PDMS) as the continuous phase for preparation of microcapsules.No surfactant was used in the microcapsule preparation process.Polyacrylonitrile(PAN),cellulose acetate(CA) and chitosan(CTS) microcapsules containing Aliquat 336(ALQ),tetraethylene glycol(TEG) and bovine serum albumin(BSA) have been prepared respectively.The prepared microcapsules are orbicular with very compact surfaces,and the mean diameters are around 10～100 μm.With increasing the viscosity of PDMS or decreasing the concentration of polymer solution,the mean diameters of microcapsules decrease.The loading ratio of microcapsules can be easily controlled by adding separation agents into PDMS.The loading ratio of ALQ/PAN,TEG/CA and BSA/CTS microcapsules can reach up to 0.43,0.38 and 0.08 g/g respectively.
Silicone-Based Tissue-Mimicking Phantom for Needle Insertion Simulation

yancheng wang,bruce l tai,hongwei yu,albert j shih

DOI: https://doi.org/10.1115/1.4026508

2014-01-01

Abstract:Silicone-based tissue-mimicking phantom is widely used as a surrogate of tissue for clinical simulators, allowing clinicians to practice medical procedures and researchers to study the performance of medical devices. This study investigates using the mineral oil in room-temperature vulcanizing silicone to create the desired mechanical properties and needle insertion characteristics of a tissue-mimicking phantom. Silicone samples mixed with 0, 20, 30, and 40 wt. % mineral oil were fabricated for indentation and needle insertion tests and compared to four types of porcine tissues (liver, muscle with the fiber perpendicular or parallel to the needle, and fat). The results demonstrated that the elastic modulus and needle insertion force of the phantom both decrease with an increasing concentration of mineral oil. Use of the mineral oil in silicone could effectively tailor the elastic modulus and needle insertion force to mimic the soft tissue. The silicone mixed with 40 wt. % mineral oil was found to be the best tissue-mimicking phantom and can be utilized for needle-based medical procedures.
Overview of Research on Physiological Activity and Toxicity of Silicone Oil

WANG Qi,CUI Chao,GAO Ang,LUO Hai-yu,SUN Zhe,WANG Ke-qin,WAN Jia,GONG Jiang,NI Shi-feng

DOI: https://doi.org/10.13194/j.jlunivtcm.2012.05.64.wangq.122

2012-01-01

Abstract:On the basis of extensive literature search,this paper reviewed the composition,physiological activity and mechanism of silicone oil,in order to offer reference for its further development.
Preparation of uniform microcapsules with silicone oil as continuous phase in a micro-dispersion process.

Xingchu Gong,Yangcheng Lu,Ziying Xiang,Yuning Zhang,Guangsheng Luo

DOI: https://doi.org/10.1080/02652040701640560

2008-01-01

Journal of Microencapsulation

Abstract:This paper presents an improved solvent evaporation method with silicone oil ( PDMS) as the continuous phase for preparation of microcapsules to make more polymer solvents available. A microchannel device was used to produce emulsions instead of mechanical stirring to prepare the mono-dispersed microcapsules. Under the conditions of lower evaporation temperature and shorter evaporation time, uniform polyacrylonitrile (PAN) microcapsules containing Aliquat 336 (ALQ) have been successfully prepared. N,N-dimethylformamide (DMF) with lower evaporation ability was applied as the polymer solvent. The prepared microcapsules have rough surfaces and homogeneously internal structures. By changing the two-phase flow rate, the mean size of microcapsules can be easily controlled. When more ALQ was added in polymer solution, the loading ratio of microcapsules increased. The mass transfer performance and stability were determined by extraction of Cr (VI) ions from its aqueous solution. The mass transfer rate was fast enough. After three times of repeated extraction and stripping, the microcapsules kept almost the same extraction ability, which indicated that the microcapsules have very good stability.
Covalently Attached Slippery Surface Coatings to Reduce Protein Adsorptions on Poly(dimethylsiloxane) Planar Surfaces and 3D Microfluidic Channels

Yue Cao,Xingchi Chen,Avi Matarasso,Zizheng Wang,Yang Song,Guangfu Wu,Xincheng Zhang,He Sun,Xueju Wang,Yan Li,Yi Zhang,Michael R Bruchas

DOI: https://doi.org/10.1021/acsami.2c20834

IF: 9.5

2023-02-11

ACS Applied Materials & Interfaces

Abstract:Silicone elastomers, such as poly(dimethylsiloxane) (PDMS), have a broad range of applications in basic biomedical research and clinical medicine, ranging from the preparation of microfluidic devices for organs-on-chips and ventriculoperitoneal shunts for the treatment of hydrocephalus to implantable neural probes for neuropharmacology. Despite the importance, the protein adsorptions on silicone elastomers in these application environments represent a significant challenge. Surface coatings with...

materials science, multidisciplinary,nanoscience & nanotechnology
Silicone Oil: Different Physical Proprieties and Clinical Applications

Francesco Barca,Tomaso Caporossi,Stanislao Rizzo

DOI: https://doi.org/10.1155/2014/502143

2014-01-01

BioMed Research International

Abstract:Silicone oils are important tools in vitreoretinal surgery because they have the ability to displace aqueous humor from the retinal surface, maintaining the adhesion between retina and retinal pigment epithelium. To understand this capability, it is important to know the silicone oil characteristics. Herein, we report first on the main chemical-physical proprieties and then we review the clinical applications of the current silicone oil which is lighter than water with particular reference to their indications with small gauge vitrectomy. Finally, we describe the surgical techniques to inject and remove this type of silicone oil. In the summary of this paper, we explain why silicone oils are today increasingly used and why their introduction has improved the prognosis of several retinal diseases. In fact, having different types of silicone oils allows us to choose the appropriate endotamponade for every single case.

biotechnology & applied microbiology,medicine, research & experimental
Analysis of Silicone Oil in Prefilled Syringes and Biopharmaceutical Drug Products Using High-Performance Liquid Chromatography

Jian Liu,Mike Ronk,Kiyoshi Fujimori,Hans Lee,Yasser Nashed-Samuel

DOI: https://doi.org/10.1208/s12249-021-01947-6

IF: 3.3

2021-02-01

AAPS PharmSciTech

Abstract:As the packaging of choice for many therapeutic proteins, prefilled syringes have been widely used in biopharmaceutical industry as primary containers, where silicone oil is applied to ensure their proper functionality. Adequate lubrication from sufficient amount of silicone oil and its appropriate distribution across syringe barrels is crucial for successful administration of drug product (DP) from the prefilled syringes; however, silicone oil is also susceptible to leaching from the syringe surface into the formulation with the potential to interact with therapeutic proteins, which could lead to the formation of visible and sub-visible aggregates and/or particles that are potentially immunogenic. Accurate determination and careful control of silicone oil levels in both empty syringes and protein drug products are therefore critical in process development to ensure syringe functionality, drug product quality, and patient safety. On the other hand, analysis of silicone oil can be challenging especially when the analysis is performed on formulated protein drug products, where matrix effects could be significant. It is demonstrated in this study that silicone oil in empty syringes or formulated drug products can be extracted effectively using organic solvents and quantitatively determined using high-performance liquid chromatography (HPLC) coupled with a universal detector. It was also shown that direct extraction of silicone oil from formulated protein drug products can be very challenging, but pretreatment of the protein drug products with pepsin enzymatic digestion facilitated the extraction process, which enabled the analysis of silicone oil in the drug product at low ppm levels.

pharmacology & pharmacy
Silicone Oil Tamponade Removal: Which Technique Is More Effective? An X-Ray Photoemission Spectroscopy Study

Tommaso Rossi,Paolo Canepa,Ornella Cavalleri,Ranieri Rolandi,Giorgio Querzoli,Isabella D'Agostino,Serena Telani,Guido Ripandelli

DOI: https://doi.org/10.1167/tvst.12.4.21

2023-04-18

Translational Vision Science & Technology

Abstract:Purpose: To compare the efficacy of two surgical techniques used to remove silicone oil (SiO) emulsion tamponade after pars plana vitrectomy: triple air-fluid exchange (AFX) and balanced salt solution lavage (BSSL).Methods: X-ray photoemission spectroscopy measured silicon content of the dry residue of fluid samples taken during AFX and BSSL. Ten patients underwent AFX and five BSSL. Three fluid samples were taken per patient, and the dry residue of 10 drops per sample were analyzed. A fluid sample from a patient who never received SiO tamponade was also analyzed to set a "blank" reference sample.Results: Patients' demographics showed no significant difference. Sample 1 of the two groups contained comparable silicon content while samples 2 and 3 of the AFX group contained significantly more silicon than that of the BSSL group (15.0 ± 0.1 and 12.0 ± 0.9 for the AFX group vs. 10.7 ± 1.4 and 5.2 ± 0.6 for the BSSL group, respectively; P < 0.05). The cumulative amount of silicon in the three successive samples was also significantly higher for the AFX group (42.3 ± 1.6 vs. 32 ± 2; P < 0.0001). The average silicon content ratio of consecutive samples was significantly higher for the AFX group compared to the BSSL group (0.90 ± 0.01 vs. 0.58 ± 0.06; P = 0.006).Conclusions: Triple AFX removed more silicon than triple lavage. The eye wall actively interacts with silicon emulsion retaining silicon content rather than behaving as a neutral container.Translational Relevance: Triple air-fluid exchange removed more silicon than BSS lavage. Neither technique behaved as a well-mixed box dilution, suggesting the eye walls actively retain emulsion and a dynamic equilibrium is established between silicon dispersion and the eye wall surface.

ophthalmology
Silicone oil droplets in repackaged anti–vascular endothelial growth factors for intravitreal injections: In search of the main source of contamination

José Luis Olea,María Gómez-Resa,María Mercedes Cervera-Peris,Juan Antonio Aragón

DOI: https://doi.org/10.1177/1120672118823133

2019-01-15

European Journal of Ophthalmology

Abstract:Introduction: Repackaging of anti–vascular endothelial growth factors in polypropylene syringes lubricated with silicone oil for intravitreal use is associated with the presence of intravitreal silicone oil droplets. The objective of this study is to assess how the use of silicone-free syringes (for storage and/or administration) would reduce the amount of silicone oil droplets in the product to be administered. Methods: Two 16 mL vials of bevacizumab were repackaged at the compounding pharmacy to obtain four sets of product, each consisting of three 1.2 mL tubes of the drug repackaged in different ways. Set A was repackaged according to routine practice, that is, the drug was placed into 1 mL siliconized syringes and 60 μL aliquots were extracted with 0.5 mL insulin siliconized syringes until reaching 1.2 mL. In set B, a 1-mL silicone-free syringe was used, followed by a 0.5 mL siliconized syringe. In set C, only 0.5 mL siliconized syringes were used. In set D, only the 1-mL silicone-free syringe was used. Micro-Flow Imaging technology was used for quantifying silicone oil droplet–like particles below 25 μm. Results: Silicone oil droplet–like particles were absent in set D. Set C had the highest average frequency of these particles, which was much lower in sets A and B. Set B had the lowest frequency. Conclusion: 0.5 mL insulin syringes with staked-in needles used for supplying the product seem to be the main source of silicone oil contamination in repackaged anti–vascular endothelial growth factors. Silicone-free insulin syringes with staked-in needles would be strongly recommended for supplying anti–vascular endothelial growth factor intravitreal injections from compounding pharmacies.

ophthalmology
Axial Length Measurements Before and after Removal of Silicone Oil: a New Method to Correct the Axial Length of Silicone‐filled Eyes for Optical Biometry

Kai Wang,Meng-Ke Yuan,Yan-Rong Jiang,Yong-Zhen Bao,Xiao-Xin Li

DOI: https://doi.org/10.1111/j.1475-1313.2009.00636.x

2009-01-01

Ophthalmic and Physiological Optics

Abstract:A total of 67 eyes of 67 patients that have undergone vitrectomy and silicone oil tamponade for rhegmatogenous retinal detachment were included in this prospective clinical study. We measured the axial length (AL) and the anterior chamber depth (ACD) with A-mode ultrasonography and IOL Master before and after removal of silicone oil. Phase refractive indices of silicone oil at different wavelengths from 400 nm to 1000 nm were measured with an Abbe refractometer and a series of equations were derived to adjust the AL values obtained with the IOL Master in silicone-filled eyes. The instruments showed good agreement between the AL values measured before and after removal of silicone oil. The ACD values obtained with A-mode ultrasonography were lower than the values obtained with the IOL Master (p < 0.01). The AL values obtained with the IOL Master after removal of silicone oil were lower than the values obtained preoperatively (p < 0.01). The AL values obtained with the IOL Master after adjustment are more accurate than A-mode ultrasonography in silicone-filled eyes.
A Computer Simulation and Visualization Method of Intraocular Silicone Oil Emulsification Process of Silicone Oil Tamponade

BAN Xiaojuan,WANG Jiamin,WANG Xiaokun,ZHANG Yalan,XU Yanrui,SONG Chongming,HUANG Houbin,ZHU Zhihong

DOI: https://doi.org/10.11999/JEIT210919

2022-01-01

Abstract:In vitrectomy combined with silicone oil tamponade for the treatment of Rhegmatogenous Retinal Detachment(RRD) in ophthalmology, the prediction of postoperative silicone oil emulsification, the appropriate amount of silicone oil filling and the final removal time are the key to the success of the operation. However, doctors can not directly observe the internal structure of the eyeball during the operation process, and it is difficult to analyze quantitatively the filling materials. After the operation, there is also a lack of visual cognition of the emulsification state of silicone oil. In this paper, a volume incompressible multiphase fluid computational framework based on Smooth Particle Hydrodynamics is proposed to calculate numerically the coupling of silicone oil and water in intraocular environment, combined with the surface tension model. A multiphase fluid miscible diffusion simulation method based on the force-balanced dispersion dynamics model is constructed to analyze visually and quantitatively the silicone oil emulsification process. Experiments show that this method can simulate the multiphase fluid coupling under strong surface tension and interphase interaction of miscible multiphase fluid stably, so as to assist effectively the doctors to determine the amount of silicone oil required before operation, and predict and evaluate the influence of silicone oil emulsification state on the prognosis of operation.
Sweeping technique for the removal of emulsified silicone oil droplets from the anterior surface of the iris using an ophthalmic absorption sponge

Tomoki Kurihara,Chiharu Iwashashi,Fukutaro Mano,Shunji Kusaka

DOI: https://doi.org/10.1097/ICB.0000000000001539

2023-12-26

Abstract:Purpose: Silicone oil (SO) tamponade is frequently used in complex vitreoretinal surgeries, and SO migration into the anterior chamber can lead to complications such as glaucoma and corneal decompensation. A new technique is described for the efficient removal of emulsified SO droplets, which can adhere strongly to the anterior surface of the iris. Methods: The tip of an ophthalmic absorption sponge was cut to an approximately 1x1 mm size. Using forceps, the sponge was inserted through a 25-gauge trocar, then through a corneal paracentesis, to gently scrape the surface of the iris to dislodge the adherent SO droplets, which were subsequently aspirated. Results: This technique efficiently and effectively dislodged and mobilized most emulsified SO droplets, thereby allowing removal via aspiration using a vitrector. Two months after surgery, the retina remained attached, the intraocular pressure decreased from 18 mmHg to 15 mmHg, and there were no visible SO droplets in the anterior chamber. Conclusion: The sweeping technique is a safe and efficient method to dislodge, mobilize and aspirate emulsified SO droplets that are adherent to the anterior surface of the iris, thereby decreasing the risk of future SO-related complications.
Development of emulsification resistant heavier-than-water tamponades using high molecular weight silicone oil polymers

Albert Caramoy,Victoria R Kearns,Yau Kei Chan,Nadine Hagedorn,Robert J Poole,David Wong,Sascha Fauser,Wilfried Kugler,Bernd Kirchhof,Rachel L Williams

DOI: https://doi.org/10.1177/0885328215575623

2015-03-11

Journal of Biomaterials Applications

Abstract:Purpose Developing new blends of heavier-than-water silicone oil tamponade agents containing high molecular weight polydimethylsiloxane polymer for use in vitreoretinal surgery. Materials and methods The viscoelastic properties of heavier-than-water silicone oil blends (30.5% F6H8 + 69.5% polydimethylsiloxane) containing high molecular weight polymer additive at increasing concentrations were measured using a controlled-stress rheometer (TA Instruments Rheolyst AR 1000 N). Emulsification of the blends was induced using a sonication device and a pluronic surfactant as a strong emulsifier. The percentage emulsion area was photographed and measured using ImageJ software. In a second in vitro emulsification assessment, silicone oil blends were dispersed using a high shear homogenizer and the oil-in-water droplets were counted using a coulter counter particle analyser. Results The addition of the high molecular weight polymer increased shear viscosity and viscoelasticity of the oil blends, which were measureable and to some extent predictable. The in vitro emulsification models produced contradictory results. This demonstrates the difficulty of designing and using in vitro models to evaluate the emulsification tendency of tamponade agents in vivo. Conclusion Addition of a high molecular weight polymer to heavy silicone oil can increase the viscoelasticity. These findings might contribute to the development of emulsification resistant heavy silicone oils.

engineering, biomedical,materials science, biomaterials

A New Approach for Active Removal of 5,000 Centistokes Silicone Oil Through 23-Gauge Cannula

A Machine-Independent Method to Have Active Removal of 5,000 Centistokes Silicone Oil Using Plastic Infusion Tube and 23-Gauge Microcannulas

A Modified Approach to Actively Remove High Viscosity Silicone Oil Through 23-Gauge Cannula

A novel design silicone oil removal cannula

New approaches to explanting high-viscosity silicone oil in retinal surgery—polyimide cannulas vs extraction sleeves vs a luer-trocar

Novel and Easy Techniques for 27-Gauge Silicone Oil Infusion and Removal

Polysulphone Microcapsules Containing Silicone Oil for the Removal of Toxic Volatile Organics from Water.

Passive silicone oil removal in 23-gauge transconjunctival vitrectomy

Preparation of Microcapsules with Silicone Oil As Continuous Phase Using A Solvent Evaporation Method

Silicone-Based Tissue-Mimicking Phantom for Needle Insertion Simulation

Overview of Research on Physiological Activity and Toxicity of Silicone Oil

Preparation of uniform microcapsules with silicone oil as continuous phase in a micro-dispersion process.

Covalently Attached Slippery Surface Coatings to Reduce Protein Adsorptions on Poly(dimethylsiloxane) Planar Surfaces and 3D Microfluidic Channels

Silicone Oil: Different Physical Proprieties and Clinical Applications

Analysis of Silicone Oil in Prefilled Syringes and Biopharmaceutical Drug Products Using High-Performance Liquid Chromatography

Silicone Oil Tamponade Removal: Which Technique Is More Effective? An X-Ray Photoemission Spectroscopy Study

Silicone oil droplets in repackaged anti–vascular endothelial growth factors for intravitreal injections: In search of the main source of contamination

Axial Length Measurements Before and after Removal of Silicone Oil: a New Method to Correct the Axial Length of Silicone‐filled Eyes for Optical Biometry

A Computer Simulation and Visualization Method of Intraocular Silicone Oil Emulsification Process of Silicone Oil Tamponade

Sweeping technique for the removal of emulsified silicone oil droplets from the anterior surface of the iris using an ophthalmic absorption sponge

Development of emulsification resistant heavier-than-water tamponades using high molecular weight silicone oil polymers