Abstract:A new technology to the pharmaceutical field is presented: surface decontamination by plasmas The technology is comparable to established barrier systems like e-beam, volatile hydrogen peroxide, or radiation inactivation of microbiological contaminations. This plasma technology is part of a fully automated and validated syringe filling line at a major pharmaceutical company and is in production operation. Incoming pre-sterilized syringe containers ("tubs") are processed by plasma, solely on the outside, and passed into the aseptic filling isolator upon successful decontamination. The objective of this article is to present the operating principles and develop and establish a validation routine on the basis of standard commercial biological indicators. Their decontamination efficacies are determined and correlated to the actual inactivation efficacy on the pharmaceutical packaging material.The reference setup is explained in detail and a short presentation of the cycle development and the relevant plasma control parameters is given, with a special focus on the in-process monitor determining the cycle validity. Different microbial inactivation mechanisms are also discussed and evaluated for their contribution and interaction to enhance plasma decontamination. A material-dependent inactivation behavior was observed. In order to be able to correlate the tub surface inactivation of Geobacillus stearothermophilus endospores to metallic biological indicators, a comparative study was performed. Through consistently demonstrating the linear inactivation behavior between the different materials, it becomes possible to develop an effective and time-saving validation scheme. Lay abstract: The challenge in new decontamination systems lies in a thorough validation of the inactivation efficacy under different operating regimes. With plasma, as an ionized gas, a new barrier concept is introduced into pharmaceutical aseptic processing of syringes. The presented system operates in vacuum and only decontaminates the outer surface of pre-sterilized syringe containers ("tubs"), before they are transferred into the aseptic area. The plasma does not penetrate into the tub. This article discusses the phase from development and test germ selection, across the identified sporicidal mechanisms, to a proposal for a validation scheme on the basis of commercially available biological indicators. A special focus is placed on an extensive investigation to establish a link between the tub surface microbial kill (polystyrene and Tyvek(and (2)) ) and biological indicator inactivation (stainless steel). Additionally, a rationale is developed on how an optical in-process monitor can be applied to establish a validatable limit on the base of the predetermined inactivation data of Geobacillus stearothermophilus endospores.

Cold Atmospheric Plasma Destruction of Solid Proteins on Stainless-Steel Surface and on Real Surgical Instruments.

Protein Destruction by a Helium Atmospheric Pressure Glow Discharge: Capability and Mechanisms

Experimental Study on Bacteria Disinfection Using a Pulsed Cold Plasma Jet with Helium/oxygen Mixed Gas

Bactericidal effects of nonthermal low-pressure oxygen plasma on S. typhimurium LT2 attached to fresh produce surfaces

State-of-the-art non-thermal plasma disinfection and medicine

Protein removal using atmospheric glow discharges: capability and mechanisms

Inactivation of biofilm-forming bacteria using cold atmospheric plasmas and potential application for decontamination of fresh foods

A Complementary Sterilisation Strategy Using Cold Atmospheric Plasmas.

Surface modifications caused by cold atmospheric plasma sterilization treatment

Protein Destruction by Atmospheric Pressure Glow Discharges

Plasma Decontamination: A Case Study on Kill Efficacy of Geobacillus stearothermophilus Spores on Different Carrier Materials

Inactivation of multidrug-resistant pathogens and Yersinia enterocolitica with cold atmospheric-pressure plasma on stainless-steel surfaces

Physical Mechanisms of Inactivation of Bacillus Subtilis Spores Using Cold Atmospheric Plasmas

Controlling Microbial Safety Challenges of Meat Using High Voltage Atmospheric Cold Plasma

Composition Analysis of Non-thermal Atmospheric Pressure Plasma Micro Jet and a Study of Its Sterilization Effects

Microbial Decontamination Of Food By Non-Thermal Plasmas

The Sterilization Technology Research on the Non-thermal Atmospheric Plasma

Cold Plasma Treatment of Spoilage Microorganisms on Model Food Surface and Real Fruit Tissues

APPLICATIONS OF COLD ATMOSPHERIC GAS PLASMAS FOR MICROBIAL DECONTAMINATION IN THE FOOD INDUSTRY

Inactivation of Staphylococcus Aureus and Enterococcus Faecalis by a Direct-Current, Cold Atmospheric-Pressure Air Plasma Microjet.

In Vitro Antimicrobial Effects and Mechanisms of Direct Current Air-Liquid Discharge Plasma on Planktonic Staphylococcus Aureus and Escherichia Coli in Liquids