Abstract:This experimental study presents the effect of different surfactants on micro-scale carbon fiber (CFs) distribution into carbon fiber reinforced cement-based composites (CFRC) in terms of flexural and compressive strength, stiffness, flexural toughness, and strain-sensing ability. Conducting a narrative review of the literature focusing on the fibers' separation, this paper follows a methodology introducing a combination of mechanical and chemical carbon fibers dispersion, as well as the different mixing processes (wet or dry). Three types of surfactants: Carboxymethyl cellulose (CMC), cellulose nanocrystal (CNC), and superplasticizer (SP), were applied to evaluate the CFs distribution in the cement paste matrix. Compressive and flexural strength, modulus of elasticity, and ductility of the cement-based composites (CFRC) reinforced with 0.5 wt.% CFs were investigated by three-point bending and compressive tests; flexure tests were also conducted on notched 20 × 20 × 80 mm specimens using the Linear Elastic Fracture Mechanics (L.E.F.M.) theory. Moreover, the electrical conductivity and the piezoresistive response were determined by conducting electrical resistance measurements and applying compressive loading simultaneously. The results clearly reveal that the CFs/SP solution or the CFs' dry incorporation led to a significant enhancement of flexural strength by 32% and 23.7%, modulus of elasticity by 30% and 20%, and stress-sensing ability by 20.2% and 18.2%, respectively. Although the wet mixing method exhibits improved mechanical and electrical conductivity performance, constituting an adequate strain and crack sensor, the authors propose dry mixing as the most economical method, in addition to the enhanced mechanical and electrical responses. The authors recommend an effective method for structural health monitoring systems combining an economical CFs insertion in cementitious smart sensors with great mechanical and self-sensing responses.

Properties of fiber cement reinforced with cellulose pulp modified by plasma treatment with sulfur hexafluoride (SF6)

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Properties of Phenolic Molding Compounds Reinforced with Sisal Fiber

Portland cement, gypsum and fly ash binder systems characterization for lignocellulosic fiber-cement

Mechanical behavior of a cementitious composite incorporating flax fibers treated with citric acid

Surface modification and dispersity of chopped carbon fiber and its effects on mechanical properties of gypsum-based composite materials

Experimental Study on Properties of Cellulose Fiber Concrete

Effects of Sisal Fiber Treatment on Dynamic Mechanical Properties of Sisal Fiber/Phenol Formaldehyde Resin Hybrid Composites

Influence of Different Surfactants on Carbon Fiber Dispersion and the Mechanical Performance of Smart Piezoresistive Cementitious Composites

Amazon açaí fiber-Portland cement compatibility: a challenge to produce cement-bonded fiberboards?

Cellulose defibrillation and functionalization by plasma in liquid treatment

Mechanical properties and engineering application of cellulose fiber-reinforced concrete

Research Progress on Durability of Cellulose Fiber-Reinforced Cement-Based Composites

Mechanical Properties and Microstructure of Cellulose Fiber- and Synthetic Fiber-Reinforced High-Strength Concrete

Influence of Submicron Fibrillated Cellulose Fibers from Cotton on Hydration and Microstructure of Portland Cement Paste

Reinforced cementitious composite using viscose rayon fiber from textile industry waste

Design of cellulose nanofibre-based composites with high barrier properties

Plasma-Enhanced Alginate Pre-Treatment of Short Flax Fibers for Improved Thermo-Mechanical Properties of PLA Composites

Chemical and Enzymatic Fiber Modification to Enhance the Mechanical Properties of CMC Composite Films

Producing Cellulose Microfibrils at a High Solid Content with and without Mechanical or Enzymatic Pretreatment

Research on the Influence of Cellulose Fiber on the Performance of Steel Slag Cement Cementitious Materials