Abstract:Geothermal energy, as a clean and renewable resource distributed worldwide, has received extensive focus in recent years. With the improvement in drilling and logging technology, the depth of geothermal exploration has gradually increased. Carbonate reservoirs are presently the main layer for geothermal development and use in China that have the characteristics of wide distribution, large reserves, and easy reinjection. The current use is limited to the strong karst development zone, approximately 200 m at the top of the reservoirs. Because of the low permeability and strong heterogeneity, the deep carbonate geothermal reservoirs cannot be commercially developed. This study aims to solve the key technical problems of efficiently developing deep carbonate geothermal reservoirs with extreme thickness. The target section was selected by analyzing comprehensive logging and fracture imaging logging data. An innovative simulation technology combining hydraulic jetting and acid fracturing is developed, which has the characteristics of fixed-point fracturing, effective sealing, strong penetration, and a large stimulation range. A production enhancement test was conducted for carbonate geothermal wells in the following order: comprehensive logging, imaging logging, casing cementing, perforation, pumping test, small pressure test, hydraulic injection acid fracturing, pumping test (after fracturing), and other construction processes. Comprehensive logging is an effective means to interpret the macroscopic pore and permeability properties of a reservoir and can be used to initially select the target geothermal reservoir. Fracture imaging logging can provide a more intuitive understanding of fracture development and distribution characteristics. The results show that the fracture density of geothermal well D22 does not decrease substantially with increasing depth, and the fracture width tends to decrease with depth clearly. The experimental geothermal well D22, which has the largest thickness of carbonate geothermal reservoir exposed in the Xiong'an New Area, was selected to perform a pilot field test of stimulation. The results show that the water inflow of the target section at 3024–3174 m increased from 4.72 m3·h−1 before stimulation to 44.10 m3·h−1 after stimulation, increasing by 8.3-fold. The unit water inflow increased from 0.024 m3·(h·m)−1 before stimulation to 0.745 m3·(h·m)−1 after stimulation, increasing by 30-fold. The reservoir permeability coefficient increased from 4.4×10−3 m·d−1 to 146.3×10−3 m·d−1. The wellhead water temperature increased from 60.0 °C before stimulation to 66.5 °C after stimulation. Therefore, the development potential of deep and thick carbonate geothermal reservoirs can be substantially improved through the developed stimulation. This research can provide technical support for the large-scale development of geothermal resources in China.

Research and Test of Drilling and Completion Technology of Geothermal Reinjection Well in Dongying Area

Research and Application of Sand Control Technique in Very Shallow Reservoir in Dagang Oilfield

Progress and Prospect of Mid-Deep Geothermal Reinjection Technology

A Study on Modeling a Deep Sand Geothermal Field in South China

Experimental Study of the Enhanced Stimulation of a Deep Carbonate Thermal Reservoir in the Xiong'an New Area

Geothermal reservoir characteristics of SYYD-1 well and energy efficiency analysis after geothermal transformation

Research Progress on Temperature Field Evolution of Hot Reservoirs under Low-Temperature Tailwater Reinjection

Performance of Multi-Well Exploitation and Reinjection in a Small-Scale Shallow Geothermal Reservoir in Huailai County

Influencing parameters of recharge efficiency and well types optimization in middle-deep sandstone geothermal reservoir

Experimental Study on Reservoir Physical Properties and Formation Blockage Risk in Geothermal Water Reinjection in Xining Basin: Taking Well DR2018 as an Example

Safe and efficient drilling and completion technology for deep shale gas in Sichuan and Chongqing

Analysis of water injection heat recovery potential of abandoned oil wells to geothermal wells in northern Shaanxi

Experimental study on reinjection enhancement of sandstone with radial wells

The status quo and prospect of geothermal resources exploration and development in Beijing-Tianjin-Hebei region in China

Application of well logging technology in geothermal resource evaluation: A case study of geothermal water wells in the Qianjiang sag, Jianghan Basin

Geological and Engineering Integration Fracturing Design and Optimization Study of Liushagang Formation in Weixinan Sag

Study on Hydraulic Fracture Propagation in Mixed Fine-Grained Sedimentary Rocks and Practice of Volumetric Fracturing Stimulation Techniques

Evaluation of Improving Water Flooding Technology by Volume Fracturing of Water Injection Wells in Complex Fractured Reservoirs: A Case Study of Chang 6 Reservoirs in Huaqing Oilfield, Ordos Basin

Experimental and Numerical Investigations of Low-Permeability Sandstone Under Water Injection–Induced Dilation in West Oilfield, South China Sea

An Intelligent Artificial Lift Technology and its Trial in Middle East: Integration of Remote Wireless Control and Artificial Automation for Zonal Water Injection

The hydraulic fracturing design technology and application of geological-engineering integration for tight gas in jinqiu gas field