Abstract:In this article, a second-order 3-D bandpass polarization-rotating surface (PRS) that can rotate vertically polarized incident waves by 90° and facilitate the output of horizontally polarized waves is presented. First, each PRS element is constructed using a pair of parallel-coupled slotline sections with open-short-ends, which are etched on vertically and horizontally inserted single-layer printed circuit boards (PCBs), respectively. Then, under vertically polarized incident waves, one of the slotline sections can convert the incident spatial waves into guided waves through its open end. After which, the guided waves are coupled to the other slotline section and the electric field direction will be rotated by 90° through the coupling path, thus leading to a 90° polarization rotation. Subsequently, a direct coupling matrix is used to synthesize and design the proposed PRS based on the microwave filter theory. Investigations reveal that a desirable bandpass filtering response can be obtained by properly designing the internal coupling of the parallel-coupled slotline sections and the external coupling between the incident spatial waves and the PRS. To validate the design concept, two examples with different fractional bandwidths at the same center frequency of 5 GHz and the same return loss of 20 dB were designed, fabricated, and measured. Consequently, a good agreement was attained among the results from coupling matrices, full-wave electromagnetic (EM) simulations, and measurements. All the results demonstrate that the proposed PRSs feature simple topologies, easy fabrications, low insertion losses (ILs), high polarization-rotating ratios, and stable filtering performances under large oblique incidences. In addition, our proposed method can be applied to design higher-order PRSs with sharpened out-of-band roll-off skirts.

A Novel Reflective Surface With Polarization Rotation Characteristic

Polarization Control by Using Anisotropic 3-D Chiral Structures

Novel Dual-Polarization Multimode Artificial Frequency-Selective Surface with Independently Reconfigurable Windows for Different Frequencies

Reflection-type transparent metamaterial polarization rotator with ultra-wide bandwidth

A Single-Layer Vialess Polarization Rotation Reflective Surface With High Frequency Selectivity

Synthesis of 3-D Polarization-Rotating Surface Based on Orthogonally Inserted Parallel-Coupled Slotlines

Metasurface-based broadband polarization-insensitive polarization rotator

Wideband switchable linear polarization rotator based on metasurface

Multifunctional Polarization Converters Based on Linear-to-Circular Polarization Decomposition Reflective Surfaces

Low-Profile Reflective Surface for Multi-Band Linear-to-Linear and Linear-to-Circular Polarization Conversion

A Multi-functional Frequency Selective Polarization Converter Based on Substrate Integrated Waveguide Cavities

Single- and Dual-Band High-Order Polarization Rotating Frequency Selective Surface

Planar Polarization Rotation Pattern Manipulation Surfaces with Enhanced Incident Angle Range and Beam Steering Ability

A High Performance Polarization Independent Reflector Based on A Multilayered Configuration Grating Structure

Broadband Reflective Polarization Rotator Built on Single Substrate

Frequency-selective Microwave Polarization Rotator Using Substrate-Integrated Waveguide Cavities

Anisotropic Impedance Surfaces for Linear to Circular Polarization Conversion

A Broadband Ultra-Thin Polarization Rotator Using Periodically Loaded Parallel Strip-Lines

A Multiband and Multifunctional Metasurface for Linear and Circular Polarization Conversion in Reflection Modes

Reflective One-to-multi-polarization Conversion Via Separate Control of Phase and Magnitude

Dual-Band Wide-Angle Reflective Circular Polarization Converter with Orthogonal Polarization Modes