Abstract:Purpose This paper aims to propose a new linear parameter varying (LPV) controller for the robot tracking control problem. Using the identification of the robot dynamics in different work space points about modeling trajectory based on the least square of error algorithm, an LPV model for the robotic arm is extracted. Design/methodology/approach Parameter set mapping based on parameter component analysis results in a reduced polytopic LPV model that reduces the complexity of the implementation. An approximation of the required torque is computed based on the reduced LPV models. The state-feedback gain of each zone is computed by solving some linear matrix inequalities (LMIs) to sufficiently decrease the time derivative of a Lyapunov function. A novel smoothing method is used for the proposed controller to switch properly in the borders of the zones. Findings The polytopic set of the resulting gains creates the smooth switching polytopic LPV (SS-LPV) controller which is applied to the trajectory tracking problem of the six-degree-of-freedom PUMA 560 robotic arm. A sufficient condition ensures that the proposed controller stabilizes the polytopic LPV system against the torque estimation error. Practical implications Smoothing of the switching LPV controller is performed by defining some tolerances and creating some quasi-zones in the borders of the main zones leading to the compressed main zones. The proposed torque estimation is not a model-based technique; so the model variation and other disturbances cannot destroy the performance of the suggested controller. The proposed control scheme does not have any considerable computational load, because the control gains are obtained offline by solving some LMIs, and the torque computation is done online by a simple polytopic-based equation. Originality/value In this paper, a new SS-LPV controller is addressed for the trajectory tracking problem of robotic arms. Robot workspace is zoned into some main zones in such a way that the number of models in each zone is almost equal. Data obtained from the modeling trajectory is used to design the state-feedback control gain.

Robust reliable tracking controller design against actuator faults for LPV systems with state feedback

Robust reliable tracking controller design against actuator faults for LPV systems

Satisfactory Fault-Tolerant Controller Design for Uncertain Systems Subject to Actuator Faults

Continuous Robust Tracking Controllers for a Class of Uncertain Nonlinear Dynamical Systems

Robust Reliable Tracking Control for a Class of Uncertain Systems and Its Application to Flight Control

Switched LPV resilient tracking control for rigid-body with defective actuators and sensors

Robust Reliable Feedback Controller Design Against Actuator Faults for Linear Parameter-Varying Systems in Finite-Frequency Domain

Linear Parameter-Varying Controller Design for Four-Wheel Independently Actuated Electric Ground Vehicles with Active Steering Systems

Active Fault-Tolerant Tracking Control for Discrete-Time Switched LPV System Based on Virtual Actuator Method

A Robust H∞ Fault-Tolerant Control Approach for Time-Delay LPV Systems with Uncertain Parameters and Unknown Disturbances

Robust Tracking Controller Design For A Class Of Linear Time-Varying Systems And Its Application On Btt Missiles

Robust Tracking Control of Nonlinear Singularly Perturbed Systems

For a class of linear systems LMI-based design of reliable tracking control

Adaptive Fault Tolerant Controller Design for Linear Singularly Perturbed Systems

A Reliable Robust Control Method for Vehicle Lateral Dynamics with Preview Driver Model

Robust Adaptive Control of Linear Parameter-Varying Systems with Unmatched Uncertainties

Robust Linear Parameter-Varying Control for Longitudinal Maneuvering Flight of Air-Breathing Hypersonic Vehicle

Robust Finite-Time Stability and Stabilisation for Switched Linear Parameter-Varying Systems and Its Application to Bank-To-Turn Missiles

Robust Tracking Control for an Air-Breathing Hypersonic Vehicle with Input Constraints

Robotic arm tracking control through smooth switching LPV controller based on LPV modeling and torque approximation

Robust fault-tolerant control for linear systems with nonlinear uncertain parameters