Abstract:This paper focuses on the time-variant radio frequency interference (RFI) issue that ultra-wide band (UWB) through-wall radar (TWR) is faced with, and presents an iterative dual sparse recovery (IDSR) framework to combat it. The framework consists of two stages: 1) RFI estimation and detection and 2) IDSR of scattered echoes from objects and RFI signals. In the first stage, an overlapped short time Fourier transform is employed to construct and update the discrete frequency Doppler spectrum (DFDS). Then, a minimum statistic operation is conducted on the DFDS to estimate RFI signals, followed by detection via a 1-D cell-averaging constant false alarm rate detector to determinate whether RFI signals exist or not. In the second stage, a dual sparse model of the collected signals is set up, based on the fast-time frequency sparsity of RFI signals because of their narrow bands and the Doppler frequency sparsity of scattered echoes from objects because of their limited moving velocities. The alternating direction method of multipliers (ADMM) is introduced to iteratively and alternately recover RFI signals and scattered echoes from objects. Specifically, the iterative hard thresholding (IHT) method is used to complete the two sparse recovery operations. The involved two sparse dictionaries are simple and only made up of inverse discrete Fourier transform basis and independent of the received signals. The IDSR framework is able to relieve the influences of RFI signals and scattered echoes from objects on each other, and thus can reconstruct the two type signals to the maximum limit. Field experiments using a UWB TWR were carried out to verify the proposed method.

TOA estimation after power transformation in IR UWB ranging with energy detection receiver

TOA Estimation in IR UWB Ranging with Energy Detection Receiver Using Received Signal Characteristics

Application of Power Transformation and Moments in Time Based UWB Ranging

Analysis of TOA estimation using the received signal characteristics in IR UWB ranging with energy detection receiver

TOA Estimation in IR UWB Ranging Using Rank Statistics with Energy Detection Receiver under Harsh Conditions

Analysis of Energy Detection Receiver for Toa Estimation in Ir Uwb Ranging and A Novel Toa Estimation Approach

Entropy based TOA estimation in IR UWB ranging with energy detection receiver under dense multipath environment

TOA Estimation Based on Normalized Threshold for IR-UWB Systems

A Two-Step TOA Estimation Method Based on Energy Detection for IR-UWB Sensor Networks

First Path Detection Using Rank Test in IR UWB Ranging with Energy Detection Receiver under Harsh Environments

Nonparametric TOA Estimators for Low-Resolution IR-UWB Digital Receiver

A TOA Estimate Algorithm Based on UWB Strongest Path Detection and Performance Evolution

Two-step Ranging Based on Energy Detection for IR-UWB Sensor Networks

A TOA estimation method for UWB signals based on weighted energy detection

An improved energy detection receiver for toa estimate in mm-Wave system

TOA Analysis Based on Energy for 60 GHz Signals

Estimation and Mitigation of Time-Variant RFI Based on Iterative Dual Sparse Recovery in Ultra-Wide Band Through-Wall Radar.

A Novel Probability-of-Detection-Difference Maximum-Based TOA Estimation Method in UWB Dense Multipath Channels

A Nonparametric IR-UWB TOA Estimator Based on Conditional Tests

Research and Implementation of a Practical Ranging Method Using IR-UWB Signals

A UWB Ranging Method Based on Weighted Energy Detection