Recent Progress in Tellurite Fibers

Yasutake Ohishi,Guanshi Qin,Meisong Liao,Xin Yan,Takenobu Suzuki

DOI: https://doi.org/10.1364/ofc.2010.omg1

2010-01-01

Abstract:We shows new potential of tellurite fibers with high nonlinearity as optical signal processing and coherent light generation media by demonstrating applications of stimulated Raman and Brillouin scattering and supercontinuum generation.

What problem does this paper attempt to address?

Multicolor upconversion emissions in Tm 3+/Er3+ codoped tellurite photonic microwire between silica fiber tapers.

Nan-Kuang Chen,Pei-Wen Kuan,Junjie Zhang,Liyan Zhang,Lili Hu,Chinlon Lin,Limin Tong

DOI: https://doi.org/10.1364/OE.18.025615

IF: 3.8

2010-01-01

Optics Express

Abstract:We report multicolor upconversion emissions including the blue-violet, green, and red lights in a Tm3+/Er3+ codoped tellurite glass photonic microwire between two silica fiber tapers. A silica fiber is tapered until its evanescent field is exposed and then angled-cleaved at the tapered center to divide the tapered fibers into two parts. A tellurite glass is melted by a gas flame to cluster into a sphere at the tip of one tapered fiber. The other angled-cleaved tapered fiber is blended into the melted tellurite glass. When the tellurite glass is melted, the two silica fiber tapers are simultaneously moving outwards to draw the tellurite glass into a microwire in between. The advantage of angled-cleaving on fiber tapers is to avoid cavity resonances in high index photonic microwire. Thus, the broadband white light can be transmitted between silica fibers and a special optical property like high intensity upconversion emission can be achieved. A cw 1064 nm Nd:YAG laser light is launched into the Tm3+/Er3+ codoped tellurite microwire through a silica fiber taper to generate the multicolor upconversion emissions, including the blue-violet, green, and red lights, simultaneously. (C) 2010 Optical Society of America
Subwavelength-diameter optical fibers: waveguiding properties and photonic applications

Li-Min TONG,Xin-Yun PAN

DOI: https://doi.org/10.3321/j.issn:0379-4148.2007.08.008

2007-01-01

Physics

Abstract:By means of high-temperature physical drawing, glasses can be directly drawn into subwavelength-or nanometer-diameter fibers. As-fabricated nanofibers show excellent diameter uniformity and surface smoothness for low-loss optical wave guiding, and may exhibit a series of interesting properties such as tight optical confinement, evanescent guidance and high waveguide dispersion. These fibers provide promising building blocks for photonic applications in optical communications, optical sensing and nonlinear optics.
Recent Progress in Optical Micro/Nanofiber Technology

Tong Limin

DOI: https://doi.org/10.3788/AOS202242.1706001

2022-01-01

Acta Optica Sinica

Abstract:Optical micro/nanofihers are one-dimensional free-standing waveguiding structures with diameters close to or smaller than the vacuum wavelength of the guided light. Fabricated by physically drawing glass fiber at high temperature these fibers show excellent surface smoothness and diameter uniformity, high mechanical strength, tight optical confinement, strong evanescent field, evident surface field enhancement, and large wavelength/diameter-dependent waveguide dispersion, especially much lower waveguiding loss than all other micro/nanowaveguides with similar geometries. These merits offer them great potentials in applications ranging from near field optical coupling, optical sensing, atom optics, nonlinear optics, laser technology, and optomechanics. In this review, starting from the basic waveguiding properties of optical micro/nanofihers, we introduce our recent progress in high precision fiber fabrication and micro/nanofiber-based near field coupling, optical sensors, and nonlinear optical devices. At same time, we also mention relative works from other groups. Finally, we conclude this article with a brief outlook.
Tellurium Enhanced Non-Resonant Third-Order Optical Nonlinearity in a Germano-Silicate Optical Fiber

Lin AX,Xueming Liu,Pramod R. Watekar,Wei Zhao,Bo Peng,Min Lu,Wei,Chaomin Sun,Yishan Wang,Won‐Taek Han,J. Toulouse

2009-01-01

Abstract:This work was supported by a grant from the National Science Foundation of USA, DMR-0701526 “Glass Science, Processing and Optical Properties of Tellurite Fibers.” Fiber fabrication and characterization were financially supported by BK-21 Information Technology Project, Ministry of Education and Human Resources Development; by the National Core Research Center Program from MOST/KOSEF (R15-2006-022-02001-0); by the GIST Top Brand Project (Photonics 2020), Ministry of Science and Technology, Republic of Korea.
Optical Pulse Shaping by Modulated Brillouin Gain in a Tellurite Fiber

Dinghuan Deng,Kenshiro Nagasaka,Tonglei Cheng,Xiaojie Xue,Takenobu Suzuki,Yasutake Ohishi

2015-01-01

Abstract:Non-silica fibers made of nonlinear glass materials such as bismuth, chalcogenide and tellurite glass could provide stimulated Brillouin scattering (SBS) interaction that is 2–3 orders of magnitude larger than that obtained in standard silica fibers. Among them, the tellurite fiber has a unique advantage of low propagation loss as small as 0.02 dB/m, and provides a higher Brilliouin gain as well as damage threshold than that of bismuth and chalcogenide glass fiber. Highly-efficient SBS slow light and fast light were demonstrated in tellurite fiber [1, 2]. We report here tunable all-optical pulse compression and stretching could be achieved by customized doublet Brillouin gain line in a short single-mode tellurite fiber. With the higher Brillouin gain by this highly nonlinear tellurite fiber, this approach has dramatically decreased the fiber length and required pump power than that obtained in standard silica fibers [3].
Multifunctional single‐crystal tellurium core multimaterial fiber via thermal drawing and laser recrystallization

Bin Han,Qianhang Luo,Pengyu Zhang,Ting Zhang,Guowu Tang,Zhe Chen,Hang Zhang,Baoan Zhong,Yunhao Zeng,Min Sun,Qi Qian,Zhongmin Yang

DOI: https://doi.org/10.1111/jace.18229

IF: 4.186

2021-11-19

Journal of the American Ceramic Society

Abstract:In the field of multimaterial optical fibers, the demand for high‐performance single‐crystal core glass‐clad multimaterial optical fibers is increasing. However, the applications of single‐crystal fibers are restricted by the complex fabrication processes and the slow growth of single‐crystal materials. Here, a two‐step method is demonstrated to achieve single‐crystal tellurium (Te) core fibers with high crystal quality over the length of the fiber. This method starts with the thermal drawing of a fiber preform into polycrystalline Te core multimaterial fibers (precursor fibers) that are long and mechanically stable. A 532‐nm continuous laser is then employed to recrystallize the Te core in the precursor fiber into a single crystal state along the entire length of the fiber. Experimental studies of these single‐crystal fibers demonstrate that the single‐crystal Te core fibers possess high transmittance (>90% at 2–10 μm) and high thermoelectric performance (ZT values from 0.03 to 0.13 at 300 K temperature). They are superior to previous reports and our previous work. This method works for fabricating various single‐crystal fibers and has important applications in the field of optical fibers, functional fibers, and their integrated devices.

materials science, ceramics
Coherent supercontinuum generation in tellurite glass regular lattice photonic crystal fibers

Mariusz Klimczak,Damian Michalik,Grzegorz Stępniewski,Tanvi Karpate,Jarosław Cimek,Xavier Forestier,Rafał kasztelanic,Dariusz Pysz,Ryszard Stępień,Ryszard Buczyński

DOI: https://doi.org/10.48550/arXiv.1902.04841

2019-02-13

Optics

Abstract:We report on designing, fabrication and experimental characterization of highly nonlinear, tellurite glass photonic crystal fibers with engineered normal dispersion characteristics for coherent supercontinuum generation. Effectively single mode, air-hole lattice fibers, with measured, all-normal dispersion profiles as flat as -10 to -50 ps/mn/km over 1500-2400 nm wavelengths are developed and investigated. Supercontinuum spectra are measured for these fibers, with a spectral width covering 1100-2600 nm wavelengths under pumping with a robust, fixed-wavelength erbium fiber-based femtosecond laser, delivering 90 fs pulses, centered at 1560 nm with peak power below 40 kW. To the best of our knowledge, this is the first engineered microstructured fiber, which due to its high nonlinearity, enables a self-phase modulation and optical wave breaking-based supercontinuum pumped with a turn-key, 40 kW femtosecond laser at spectral widths obtainable with previous all-normal dispersion fiber designs only under pumping with systems delivering peak power in the MW range.
Single Crystal Tellurium Semiconductor Core Optical Fibers

Qianhang Luo,Guowu Tang,Min Sun,Guoquan Qian,Zhenguo Shi,Qi Qian,Zhongmin Yang

DOI: https://doi.org/10.1364/ome.388187

2020-01-01

Optical Materials Express

Abstract:Tellurium (Te) semiconductor core optical fibers with silicate glass cladding were drawn by the molten core method. The as-drawn precursor fiber has a large core diameter of about 123 µm, which was found to be polycrystalline. What is more, a Bridgman-type fiber postprocessing technique was constructed and used for the first time to anneal the polycrystalline Te semiconductor core optical fibers. The Te core in precursor fiber was melted and recrystallized to single crystal Te with c-axis orientation parallel to fiber axis, which was confirmed by X-ray diffraction, single crystal X-ray diffraction, micro-Raman spectra, and transmission electron microscope measurement results. Enhanced conductivities were observed in single crystal Te semiconductor core optical fibers under illuminated and stress states, respectively. This work demonstrates that the Bridgman-type fiber postprocessing technique could be an effective way to fabricate single crystal semiconductor core optical fibers with large core diameters (∼ 100 µm) and long lengths (a few centimeters).
Soliton Self-frequency Shift and Supercontinuum Generation in a Tellurite Microstructured Optical Fiber

Tonglei Cheng,Tong Hoang Tuan,Xiaojie Xue,Dinghuan Deng,Kenshiro Nagasaka,Takenobu Suzuki,Yasutake Ohishi

DOI: https://doi.org/10.1364/nlo.2015.nw4a.33

2015-01-01

Nonlinear Optics

Abstract:Get PDF Email Share Share with Facebook Tweet This Post on reddit Share with LinkedIn Add to CiteULike Add to Mendeley Add to BibSonomy Get Citation Copy Citation Text T. Cheng, T. H. Tuan, X. Xue, D. Deng, K. Nagasaka, T. Suzuki, and Y. Ohishi, "Soliton Self-frequency Shift and Supercontinuum Generation in a Tellurite Microstructured Optical Fiber," in Nonlinear Optics, OSA Technical Digest (online) (Optica Publishing Group, 2015), paper NW4A.33. Export Citation BibTex Endnote (RIS) HTML Plain Text Citation alert Save article
Tellurene: A Multifunctional Material for Midinfrared Optoelectronics

Skylar Deckoff-Jones,Yixiu Wang,Hongtao Lin,Wenzhuo Wu,Juejun Hu

DOI: https://doi.org/10.1021/acsphotonics.9b00694

IF: 7

2019-01-01

ACS Photonics

Abstract:The mid-infrared spectral band (2-20 mu m) is of significant technological importance for thermal imaging, spectroscopic sensing, and free-space communications. Lack of optical materials compatible with common semiconductor substrates, however, presents a standing hurdle for integrated photonic device development in the mid-infrared domain. Tellurene, atomically thin crystals of elemental tellurium, is an emerging 2-D material amenable to scalable solution-based synthesis. It uniquely combines small and tunable bandgap energies, high carrier mobility, exceptionally large electro-optic activity, and superior chemical stability, making it a promising and versatile material platform for mid-infrared photonics. With these material properties in mind, we propose and design a waveguide-integrated tellurene photodetector and Pockels effect modulator. The photodetector boasts a record room temperature noise equivalent power of 0.03 fVV/Hz(1/2) at 3 pm wavelength, while the optimized modulator device claims a half-wave voltage-length product (V-pi center dot L,) of 2.7 V.cm and a switching energy of 12.0 pJ/bit, both representing substantial improvements to current state-of-the-art devices.
Supercontinuum generation in a graded-index multimode tellurite fiber

Ekaterina Krutova,Lauri Salmela,Zahra Eslami,Tanvi Karpate,Mariusz Klimczak,Ryszard Buczynski,Goëry Genty

DOI: https://doi.org/10.1364/OL.521639

2024-05-10

Abstract:We report a near two-octave spanning supercontinuum (SC) from 790 nm to 2900 nm in a nanostructured tellurite graded-index multimode fiber with a nanostructured core. We study the SC dynamics in different dispersion regimes and observe near-single mode spatial intensity distribution at high input energy values. Numerical simulations of the (3+1)D generalized nonlinear Schrödinger equation are in good agreement with our experiments. Our results open a new avenue for the generation of high-power mid-infrared SC sources in soft glass fibers.

Optics
Preparation of tellurium nanowires and its application in ultrafast photonics

Pengfei He,Xiangxiang Hu,Zhiwan Hu,Jingxian Chen,Zhaoru Xie,Jie Huang,Lili Tao,Haiming Lu,Mingming Hao

DOI: https://doi.org/10.1016/j.jlumin.2022.119335

IF: 3.6

2022-01-01

Journal of Luminescence

Abstract:As a kind of semiconductors, tellurium has attracted much attention due to its superior optical, electrical, and thermoelectric properties. In particular, a lot of research on low-dimensional tellurium has been performed in recent years, but with relatively few work on its applications in ultrafast photonics. In this work, a femtosecond fiber laser was realized using the prepared tellurium nanowires as the saturable absorber. Tellurium nanowires were synthesized by the hydrothermal method and then deposited on the tapered optical fiber to form the tellurium saturable absorber (Te-SA). The saturable absorption property of Te-SA was tested by the two-arm balance detection method, the saturation intensity and modulation depth were determined to be 8.9 MW/cm2 and 27.0%, respectively. Then, Te-SA was applied in the erbium-doped fiber laser and a stable mode-locked fiber laser with a pulse width of 621 fs was achieved. The results indicate the great potential application of tellurium nanowires in ultrafast photonics.
Experimental Investigation of Multiple Raman Peak Properties in a Hundred-Meter Tellurite Fiber

Tonglei Cheng,Weiqing Gao,Xiaojie Xue,Takenobu Suzuki,Yasutake Ohishi

DOI: https://doi.org/10.1364/ome.6.003438

2016-01-01

Optical Materials Express

Abstract:Multiple Raman peak properties in a 130 m tellurite fiber are demonstrated in this paper. When the tellurite fiber is pumped by a nanosecond laser at similar to 1545 nm, a second-order Raman shift with multiple Raman peaks is observed. Especially for the first-order Raman shift, six obvious Raman peaks are observed. When the tellurite fiber is pumped by a picosecond laser at similar to 1064 nm, a second-order Raman shift with only dual Raman peaks is obtained. Furthermore, the evolution of Raman shift with the variation of fiber length is investigated. (C) 2016 Optical Society of America
Highly Efficient Dispersive Wave Emission in a Tellurite Microstructured Optical Fiber

Tonglei Cheng,Xiaojie Xue,Dinghuan Deng,Takenobu Suzuki,Yasutake Ohishi

DOI: https://doi.org/10.1364/FIO.2015.JW2A.29

2015-01-01

Abstract:We demonstrate a highly efficient, stable and tunable dispersive wave emitted by the soliton in a tellurite microstuctured optical fiber. The conversion efficiency is over ~65%.
Numerical analysis of optical confinement in silica and tellurite multicore fibers for near-infrared image transportation

Takenobu Suzuki,Jonathan de Clermont-Gallerande,Asuka Nakatani,Yasutake Ohishi

DOI: https://doi.org/10.1364/AO.491443

2023-06-10

Abstract:We analyzed light confinement in circular step-index cores of tellurite and silica fibers through numerical calculations and also examined crosstalk between the fundamental modes of cores in multicore fibers. Our analysis showed that tellurite fibers have a pixel density about 2.2 times higher and a brightness about 1.4 times brighter than silica fibers. As a result, tellurite multicore image fibers have the potential to provide improved resolution and brightness for near-infrared image transportation compared with silica fibers.
Tellurium@Selenium core-shell hetero-junction: Facile synthesis, nonlinear optics, and ultrafast photonics applications towards mid-infrared regime

Jia Guo,Ye Zhang,Zhenhong Wang,Yiqing Shu,Zhenwu He,Feng Zhang,Lingfeng Gao,Chao Li,Cong Wang,Yufeng Song,Jun Liu,Han Zhang

DOI: https://doi.org/10.1016/j.apmt.2020.100657

IF: 8.663

2020-09-01

Applied Materials Today

Abstract:<p>Tellurium (Te) is a promising material for photonics applications due to its intriguing advantages, such as excellent optical nonlinearity, larger saturable absorption, strong thermo-optic effect, and superior UV–Vis photo-response. However, the limited optical absorption and uncertain stability of Te has greatly limited its applications in mid-infrared and higher band optical regimes. In this contribution, core-shell hetero-junction was constructed by epitaxial growth Se on Te nanotubes (NTs), which exhibits strong broadband linear and nonlinear optical response. Compared to pristine Te NTs and current mainstream nanomaterials, shows stronger nonlinear absorption and lower saturation intensity at 800 nm. By employing as a saturable absorber device of erbium-doped fiber and thulium-doped fiber lasers, the high-power mode-locked pulses with very stable operation in near- and mid- infrared regime can be acquired. These results suggest that hetero-junction is a promising material with infinite potential for new generation ultrafast nano-photonics.</p>

materials science, multidisciplinary
Stimulated Brillouin Scattering Assisted Slow Light Generation in Single Mode Tellurite Fiber

K. S. Abedin,G. -W. Lu,T. Miyazaki

DOI: https://doi.org/10.1109/cleo.2007.4452759

2007-01-01

Abstract:Efficient slow light generation is demonstrated in single mode tellurite fiber. Pulses of 60 ns width can be delayed by 67 ns in a 2-m-long fiber with a pump power of 630 mW.
Filamentation and Supercontinuum Generation in Tellurite Glass

Meisong Liao,Weiqing Gao,Tonglei Cheng,Zhongchao Duan,Xiaojie Xue,Hiroyasu Kawashima,Takenobu Suzuki,Yasutake Ohishi

DOI: https://doi.org/10.1117/12.2001734

2013-01-01

Abstract:Though soft glass such as tellurite or chalcogenide glass is transparent in the range of 3-6 μm, fiber made of it is difficult to generate supercontinuum (SC) to that range because of the high loss, the wavelength limit of pump source, and the challenges in light-coupling. To circumvent these problems, we developed SC light source by using tellurite bulk glass through filamentation. For this scheme, the optical path length in the glass is very short due to the adopted high pump power, so the negative influence of material loss is reduced greatly. The light-coupling is straightforward, and the coupling efficiency is high. The bulk glass for SC generation is cheap, and can be fabricated easily. We adopted a pump wavelength of 1600 nm which is comparatively long. Such a long pump wavelength ensures a large energy ratio of the glass’s bandgap to the incident photon, so the disadvantage of small bandgap of tellurite glass is reduced, and the twophoton absorption is avoided as well. We have shown that under suitable pump condition, the SC generation by filamentation can cover from visible to 6 μm. It is the broadest SC generation by tellurite (including glass and fiber). For the suitable pump condition, the glass was free of optical breakdown. If the interface reflections were deducted, the SC conversion efficiency was 87%. The SC conversion efficiency was stable. To the best of our knowledge, this is the first report on filamentation in tellurite glass which has a comparatively small bandgap.
Broadband 27 Μm Amplified Spontaneous Emission of Er^3+ Doped Tellurite Fibers for Mid-Infrared Laser Applications

W. C. Wang,J. Yuan,L. X. Li,D. D. Chen,Q. Qian,Q. Y. Zhang

DOI: https://doi.org/10.1364/ome.5.002964

2015-01-01

Optical Materials Express

Abstract:Er3+ doped tellurite fibers have been fabricated using a convenient suction technique. Different scanning calorimetry (DSC), Electro-probe micro-analyzer (EPMA), Raman, steady and dynamic luminescence spectra were performed to investigate their thermal, structure, and luminescent properties. Broadband 2.7 μm amplified spontaneous emission (ASE) emission with concurrent 1.5 μm and visible up-conversion emissions have been achieved in fibers with various lengths upon the excitation of 980 nm laser diode (LD). A quantitative study of the spectroscopic properties has been further analyzed in detail according to the Jude-Ofelt model, rate equation, and Dexter’s theory to evaluate the competitive relationship among them. The desirable spectroscopic characteristics associated with excellent thermal stability and mechanical properties indicate that the Er3+ doped tellurite fibers are excellent host matrices for 2.7 μm lasing and may provide applications in mid-infrared fiber lasers and amplifiers.
Phosphate glass-clad tellurium semiconductor core optical fibers

Guowu Tang,Qi Qian,Xin Wen,Guanxiang Zhou,Xiaodong Chen,Min Sun,Dongdan Chen,Zhongmin Yang

DOI: https://doi.org/10.1016/j.jallcom.2015.02.007

IF: 6.2

2015-01-01

Journal of Alloys and Compounds

Abstract:•Glass-clad tellurium semiconductor core optical fibers were successfully synthesized.•The core were found to be highly crystalline and phase-pure.•The core in fibers have high transparency at infrared wavelength from 4 to 25μm.•The tellurium core fibers have great potential utility in Raman fiber amplifiers.

Recent Progress in Tellurite Fibers

Multicolor upconversion emissions in Tm 3+/Er3+ codoped tellurite photonic microwire between silica fiber tapers.

Subwavelength-diameter optical fibers: waveguiding properties and photonic applications

Recent Progress in Optical Micro/Nanofiber Technology

Tellurium Enhanced Non-Resonant Third-Order Optical Nonlinearity in a Germano-Silicate Optical Fiber

Optical Pulse Shaping by Modulated Brillouin Gain in a Tellurite Fiber

Multifunctional single‐crystal tellurium core multimaterial fiber via thermal drawing and laser recrystallization

Coherent supercontinuum generation in tellurite glass regular lattice photonic crystal fibers

Single Crystal Tellurium Semiconductor Core Optical Fibers

Soliton Self-frequency Shift and Supercontinuum Generation in a Tellurite Microstructured Optical Fiber

Tellurene: A Multifunctional Material for Midinfrared Optoelectronics

Supercontinuum generation in a graded-index multimode tellurite fiber

Preparation of tellurium nanowires and its application in ultrafast photonics

Experimental Investigation of Multiple Raman Peak Properties in a Hundred-Meter Tellurite Fiber

Highly Efficient Dispersive Wave Emission in a Tellurite Microstructured Optical Fiber

Numerical analysis of optical confinement in silica and tellurite multicore fibers for near-infrared image transportation

Tellurium@Selenium core-shell hetero-junction: Facile synthesis, nonlinear optics, and ultrafast photonics applications towards mid-infrared regime

Stimulated Brillouin Scattering Assisted Slow Light Generation in Single Mode Tellurite Fiber

Filamentation and Supercontinuum Generation in Tellurite Glass

Broadband 27 Μm Amplified Spontaneous Emission of Er^3+ Doped Tellurite Fibers for Mid-Infrared Laser Applications

Phosphate glass-clad tellurium semiconductor core optical fibers