Abstract:Adaptive arrays have been widely used for interference mitigation in Global Navigation Satellite System (GNSS) receivers. Unlike adaptive nulling, adaptive beam-forming generates a dedicated beam in the antenna pattern towards each individual satellite and form nulls in the interference directions at the same time. Thus, the satellite signals are enhanced while interferences are mitigated, resulting in improved signal-to-interference-plus-noise ratio (SINR). In previous literature mainly two categories of beam-forming mechanisms are recommended, namely the array synthesis method and the so-called "blind" beam-forming method. The array synthesis method calculates the steering vector directly, but needs a cumbersome correction procedure dealing with the non-ideal factors of the antenna array and radio frequency (RF) channels. The blind beam-forming method generates the steering vector on-the-fly using carrier phases collected by auxiliary tracking channels, thus avoids the correction procedure, but has a limited performance against interferences. As an alternative, we proposed a different beam-forming method, which can be regarded as a combination of the two above. This method consists of two steps. In the calibration step, a carrier phase look up table (LUT) is obtained using the live-sky signals. In the beam-forming step, the steering vector is generated by looking up the LUT. This method doesn't need a cumbersome non-ideal factor correction procedure, and has a good anti-interference performance, thus can be a third option for beam-forming.In order to implement and validate this method, a software-defined approach is used. Two real-time software receivers, one for the calibration step and one for the beam-forming step are designed and implemented. In order to meet the real-time requirement, a graphics processing unit (GPU) is used as an accelerator. A batched programming technique is used to fully take advantage of the parallelism offered by the GPU. Software design and programming details are introduced. Experiments are conducted in real environment and results are given. It concludes that this method has a good beam-forming performance in improving C/N-0 and getting more precise positioning results.

The Correction of Mutual Coupling and the Amplitude and Phase Error Based on Digital Beamforming Receiving Antenna

Comparison of Correction Techniques and Analysis of Errors for Digital Beamforming Antenna Array with Single RF Receiver

Correction Method for Magnitude and Phase Variations in Acoustic Arrays Based on Focused Beamforming

Phase Center Correction for GNSS Adaptive Anti-Jamming Antenna Array

Array calibration for compensating gain/phase mismatch and mutual coupling effects in Smart Antenna Systems

Adaptive Beam-Forming with Reduced Phase Biases Using a Partially Calibrated Array for Ship Positioning

Mutual Coupling, Gain and Phase Error Calibration for Transmitting Array

Mutual coupling calibration of DBF array with combined optimization method

A Two-Step Beam-Forming Method Based on Carrier Phases for Gnss Adaptive Array Anti-Jamming

Frugal Calibration Of Mutual Coupling In Large Scale Antenna Array

A Channel Decoupling Method for Digital Phased Array Beamforming Based on Chaotic Genetic Algorithm

The Effect of Mutual Coupling on the Performance of GNSS Antenna Arrays

A Mutual Coupling Compensation Method In Array Antennas

The Correction Of Broadband Channels Based On Adaptive Filter

Interference Suppressing and Null Broadening Method for GNSS Receiver Based on Circular Antenna Array

High Precision and Difference Measurement of Inter-element Amplitude and Phase Bias Errors Based on Channel Multiplexing

Robust Wideband Interference Suppression Method for GNSS Array Antenna Receiver via Hybrid Beamforming Technique

Calibration of Array Weights Against Mutual Coupling for Beamforming on ULA Antennas

Optimal Blind Gnss Beamforming Architecture in the Presence of Gain/Phase Mismatch

A Centering Correction Method For Gnss Antenna Diversity Theory And Implementation Using A Software Receiver

Anti-Jamming GNSS Antenna Array Receiver with Reduced Phase Distortions Using a Robust Phase Compensation Technique