Abstract:It is well known that a high voltage across the coupling plates of a capacitive power transfer (CPT) system is beneficial to increase its power transfer capability, but a high voltage may lead to high insulation requirements and cause safety concerns. This article proposes a compensation design method for achieving the maximum power of CPT systems under coupling voltage constraints. Based on a simplified capacitive coupling model and thorough power transfer characteristics analysis, a family of compensation topologies are derived to maintain a 90° phase shift between the input and output voltages across the CPT coupler against load variations, so that the coupling voltages (which practically need to be limited) are fully utilized for power transfer purposes. A full design process for determining the compensation parameters is presented, and an example 2-kW CPT system is built and tested using LC compensation at the primary side to boost the input voltage to the coupler; and one of the proposed compensation topologies (CLC) at the secondary side for impedance transformation of a given load with a specified voltage and power requirements. Experimental results show a good agreement with theoretical analysis, which demonstrate the phase difference between the voltages before and after the coupler is kept nearly 90°, and a maximum possible power transfer of 2.039 kW is achieved under the given voltage limits and coupling conditions. A system end-to-end (dc–dc) efficiency of 90.29% is obtained when the air gap between the coupling plates is 150 mm, and the coupling capacitance is only 13.84 pF.

A Double-Sided LCLC-Compensated Capacitive Power Transfer System for Electric Vehicle Charging

An Improved Design Method Based on a Multi-Plate Coupler Structure for Capacitive Power Transfer with Wide Ranges of Misalignment and Loads

A CLLC-compensated high power and large air-gap capacitive power transfer system for electric vehicle charging applications

A Parameter Design Method for High Performance LCLC-LC Compensated CPT Systems

Double Closed Loop Controller with Current Sharing of Interleaved DC/DC Converter for Dynamic Wireless Power Transfer System

A Nonmonotonic Parameter Design Approach for Compact Capacitive Power Transfer

A Two-Plate Capacitive Wireless Power Transfer System for Electric Vehicle Charging Applications

Double-Sandwich Magnetic Coupling Structure Design for Dual-LCL Wireless Charging System in EV Applications

Double Cavity Coupling Structure Design of a Capacitive Wireless Power Transfer System under Seawater

A Dual-Source Inductive Power Transfer System Optimized with Large Misalignment Tolerance

An Asymmetrical Loosely Coupled Transformer and Constant Current Wireless Charging Scheme for Warehouse Vehicles

A Heterogeneous Inductive Power Transfer System for Electric Vehicles with Spontaneous Constant Current and Constant Voltage Output Features

3.5-kW 94.2% DC–DC Efficiency Capacitive Power Transfer With Zero Reactive Power Circulating

Compensation Network Design of CPT Systems for Achieving Maximum Power Transfer Under Coupling Voltage Constraints

An LCLC-LC-Compensated Capacitive Power Transferred Battery Charger With Near-Unity Power Factor and Configurable Charging Profile

A Self-Tuning LCC/LCC System Based on Switch-Controlled Capacitors for Constant-Power Wireless Electric Vehicle Charging

A Capacitive Power Transfer System Designed for Stable Outputs with Load Variations

Design of CPT System With Multiple Constant Output Voltage Pickups Using Inverse Hybrid Parameters of Capacitive Coupler

A Constant Output Capacitive Wireless Power Transfer System based on Parity-Time Symmetric

A Two-Stage Parameter Optimization Method for Capacitive Power Transfer Systems

A Circuit Design Method for Constant Voltage Output With Zero Phase Angle and Minimum Coupler Voltages in Capacitive Power Transfer