Hitless and Gridless Reconfigurable Optical Add Drop (de)multiplexer Based on Looped Waveguide Sidewall Bragg Gratings on Silicon
Xiaofei Wang,Hui Yu,Huiye Qiu,Qiang Zhang,Zhilei Fu,Penghui Xia,Bei Chen,Xiaoqing Guo,Yuehai Wang,Xiaoqing Jiang,Jianyi Yang
DOI: https://doi.org/10.1364/oe.390218
IF: 3.8
2020-01-01
Optics Express
Abstract:Reconfigurable optical add-drop filters in future intelligent and software controllable wavelength division multiplexing networks should support hitless wavelength switching and gridless bandwidth tuning. The hitless switching implies that the central wavelength of one channel can be shifted without disturbing data transmissions of other channels, while the gridless tuning means that the filter bandwidth can be adjusted continuously. Despite a lot of efforts, very few integrated optical filters simultaneously support the hitless switching of central wavelength and the gridless tuning of bandwidth. In this work, we demonstrate a hitless add-drop filter with gridless bandwidth tunability on the silicon-on-insulator (SOI) platform. The filter comprises the two identical multimode anti-symmetric waveguide Bragg gratings (MASWBG) which are connected to a loop. The phase apodization technique is utilized to weaken the intrinsic sidelobe interference of grating-based devices. By sequentially manipulating central wavelengths of the two MASWBGs with the thermo-optical effect, we can reconfigure the spectral response of the filter gridlessly and hitlessly. Specifically, the central wavelength of the device is shifted by 14.5 nm, while its 3 dB bandwidth is tuned from 0.2 nm to 2.4 nm. The dropping loss and the sidelobe suppression ratio (SLSR) are dependent on the bandwidth selected. Measured variation ranges of dropping loss and SLSR are from -1.2 dB to -2.5 dB and from 12.8 dB to 21.4 dB, respectively. The hitless wavelength switching is verified by a data transmission measurement at a bit rate of 25 Gbps.