Abstract:With the increasing attention on oceanography, more effective exploration technology has been of great interests in the community of ocean engineering. Side-scan sonar is a popular imaging equipment for seabed topography; however, it is commonly used under 4 knots, which does not meet the actual demand of the modern oceanographic research. This paper proposes a high-speed side-scan sonar imaging scheme based on multi-beam forming technology. In this scheme, the digital signal processing system can adjust the maximum response direction of the receiving array by introducing appropriate phase shift or time delay to the output, so as to increase the scanning range and then improve operation efficiency. In order to verify the feasibility of this imaging algorithm, an ocean environment model is constructed, which simulates the acoustic propagation theory, the principle of seabed acoustic backscattering and the acoustic signal modulation method. After analyzing the acoustic characteristics of uniform linear array, an underwater acoustic transducer with multiple receiving subarrays is designed. In the process of simulated navigation, the receiving subarrays will generate the electrical signal containing seabed acoustic information. Based on the simulation signal, the parameters of the digital filter in the actual system can be determined in advance, which provides convenience for later processing. The time delay matrix of each receiving channel based on dynamic focusing beamforming method can be verified by imaging the seabed model. The processed acoustic data are combined with GPS information and heading angle to generate seabed scanning image in the host computer system. This paper mainly presents the imaging algorithm of multi-beam side-scan sonar digital signal processing system.

Distributed and parallel subarray beamforming for near-field 3D sonar imaging

An Efficient Near-Field Parallel Subarray Beamforming for Portable 3D Imaging Sonar

Distributed and Parallel Subarray Beamforming for Underwater Real-Time 3-D Acoustic Imaging

A Real-Time 3-D Underwater Acoustical Imaging System

Design of Portable Three-Dimensional Sonar for Both Far-Field and Near-Field

Multi-Frequency Transmitting Beamforming Algorithm Based on Cross Array

A Low-Complexity Real-Time 3-D Sonar Imaging System with a Cross Array

Pruned Distributed and Parallel Subarray Beamforming for 3-D Underwater Imaging With Fine-Grid Sparse Arrays

An Imaging Algorithm for High-speed Side-scan Sonar Based on Multi-beam Forming Technology

Design of Low-Complexity 3-D Underwater Imaging System with Sparse Planar Arrays

Fast broadband beamforming based on vector hydrophone array

Adaptive Beamforming for Cascaded Sparse Diversely Polarized Planar Array

Near-field beamforming for a Multi-Beam Echo Sounder: Approximation and error analysis

Beamforming based on spatial-wavelet decomposition

Optimization of the Digital Near-Field Beamforming for Underwater 3-D Sonar Imaging System

Research Progress on Coprime Array Signal Processing: Direction-of-Arrival Estimation and Adaptive Beamforming

Sparse-reconstruction-based high resolution beamforming and its application to multi-beam systems

Digital Beamforming by Multiple Chirp Zeta Transforms for 3-D Sonar Imaging Systems

Expansion of Field of View for Near-Field Fast Beamforming in 3-D Acoustic Imaging Based on the Optimized Subregion Approach

Design of 3 D sonar systen based on nultistage beanforning

Fast Broadband Beamforming Using Nonuniform Fast Fourier Transform for Underwater Real-Time 3-D Acoustical Imaging