Abstract:To accurately and quickly predict the open-circuit air-gap magnetic field in interior permanent magnet synchronous machines (IPMSMs), an analytical model based on magnetic equivalent circuit (MEC) method is proposed. The analytical model can provide radial and tangential components of open-circuit magnetic field in the slotless air gap. The radial component is obtained from the MEC model, and the tangential component is obtained from boundary conditions of macroscopic equations. Then, a complex relative air-gap permeance is applied to take the effect of slots into account. As a result, an accurate solution of both radial and tangential components of the flux density in the slotted air gap is obtained. Additionally, the no-load back electromotive force (EMF) and cogging torque are calculated based on the open-circuit air-gap magnetic field. All the analytical results are verified by the finite element (FE) analysis and they are well matched. In the end, a direct measurement experiment of open-circuit air-gap magnetic field is proposed to verify the validity of both radial and tangential open-circuit air-gap magnetic fields.

Finite-width Gap Excitation and Impedance Models

Wideband Description of the Finite-Ground Coplanar Waveguide-Type Structures with Discontinuities

An efficient finite element solution using a congruent transformation based model order reduction for interconnect simulation

Analytical Modeling of Open-Circuit Air-Gap Flux Density in Interior Permanent Magnet Machine

Finite-difference Time-Domain Macromodel for Simulation of Electromagnetic Interference at High-Speed Interconnects

Modeling of Loaded Nonuniform Grid Power Distribution Network with Arbitrary Shapes

Accuracy Investigation of the Wire‐grid Model in EM Scattering Analysis with the MoM

Analytical Model of Electromagnetic Performance for Permanent-Magnet Vernier Machines Using Nonlinear Exact Conformal Model

An Enhanced Gap Source Model

Improved air gap permeance model to characterise the transient behaviour of electrical machines using magnetic equivalent circuit method

A Simple 3-D Analytical Modeling Method and Sensitivity Analysis for the Axial-Flux Permanent Magnet Eddy Current Coupler

An Extended Asymptotic Model for Fast Evaluation of the Induced Current on Multi-conductor Transmission Lines Excited by the High-Frequency Non-uniform Electromagnetic Field

Analytical Model of Open-Circuit Air-Gap Field Distribution in Interior Permanent Magnet Machines Based on Magnetic Equivalent Circuit Method and Boundary Conditions of Macroscopic Equations

An Efficient Model of the Transmission Lines Excited by the External Nonuniform Transient Electromagnetic Field Using the MPM

Scalable Modeling for the CPW Gap Discontinuity at Frequency Up to 150 GHz

Electromagnetic Performance Analysis of Hybrid-Excited Flux-Switching Machines by a Nonlinear Magnetic Network Model

S-domain FE Analysis of Magneto-quasi-static Problem Using Discrete Laplace Transform

Full-wave Analysis of Complicated Transmission-Line Circuits Using Wire Models

An improved MoM model for line-fed patch antennas and printed circuits

An Adaptive Finite Element Method for the Eddy Current Model with Circuit/Field Couplings

A Novel Method for Modeling the Air Gap Flux Density of the Axial-Flux Permanent Magnet Eddy Current Coupler Considering the End-Effect