Abstract:The inverter-fed motor is a key component of environmental-friendly hybrid cars, high-speed trains, and other industrial applications. After the widespread use of inverter-fed motors, the repetitive impulse surges from inverters were found to cause new insulation problems in inverter-fed motors that were linked to premature insulation failure. The partial discharge (PD) induced by the overvoltage inner stator windings was found to be the root cause of insulation reliability problems. To mitigate this problem, PD detection and life testing at repetitive square voltages should be performed on new types of insulation models and entire motor insulation systems. The obtained partial discharge inception voltage (PDIV) and lifetime of insulation in the tests can be used to evaluate the insulation status of inverter-fed motor insulation systems and thus to improve the insulation designs. At AC voltage conditions, the voltage frequency can significantly affect PD activity. At repetitive square voltage with rapid rise time, the influence of the square voltage frequency on PD activity should be investigated (1) to suggest values for the repetitive square voltage frequency selection for the PDIV and lifetime tests, and (2) to increase the signal-to-noise ratio when extracting PD pulses from strong disturbances generated by the operating switch of impulse generators. Therefore, the main purpose of this paper was to investigate the effects of repetitive square voltage frequency on PD events. Insulation models of both Type I (low-voltage inverter-fed motor) and Type II (high-voltage inverter-fed motor) were used to obtain single-PD and multi-PD statistical features, respectively. Experimental results indicated that higher frequencies caused less PD events with lower PD magnitudes and shorter delay times in one square voltage cycle. This phenomenon was attributed to the different surface charge decay ratios and the initial electron emission probabilities resulting from different square voltage frequencies. Finally, a number of considerations for PD measurements on inverter-fed motors were provided to improve the sensitivity of the PD test system and to obtain high objective insulation lifetime test results, which are used to assess the insulation status of inverter-fed motors.

PD Characteristics and Microscopic Analysis of Polyimide Film Used As Turn Insulation in Inverter-Fed Motor

Study on PD Damage Mechanism of Nano-composite Used as Turn Insulation in Inverter-Fed Traction Motors

Insulation Failure of Inter-Turn Insulation in Inverter-Fed Traction Motor

Microscopic View of Aging Mechanism of Polyimide Film under Pulse Voltage in Presence of Partial Discharge

Electrical Damage Characteristics of Polyimide Film Caused by Surface Discharge

Influence of nano particles on partial discharge of polyimidefilms

Microscopic Degradation Mechanism of Polyimide Film Caused by Surface Discharge under Bipolar Continuous Square Impulse Voltage

Damage processes of polyimide film caused by surface discharge

Partial Discharge Characteristics of Insulation Used in Inverter-fed Traction Motor under High Frequency Impulse

Partial discharge characteristics of polyimide films used in inverter-fed traction motor under different temperatures

Nano Particles on Aging Characteristics of Polyimide Film

Study On Charge Transport Mechanism In Polyimide Films

Effect of Temperature on Partial Discharge Properties of Polyimide Film Under Continuous Square Impulse Voltage

Possible Mechanism of Electrical Treeing and Breakdown for Polyimide Nanocomposite Film Used in Inverter-Fed Motor

Study on Charge Transport Mechanism and Space Charge Characteristics of Polyimide Films

Electrical Treeing Breakdown Properties for Polyimide Nanocomposite Film in Inverter-Fed Motors

Aging Properties of Polyimide Materials Under Square Impulse Voltage

Partial Discharge Characteristics of Interturn Insulation Used for Inverter-Fed Traction Motor under Bipolar Impulses

Research Progress of Key Characteristics and Nano-modification of Insulating Material for Inverter-fed Traction Motor

Investigation of Partial Discharge Transformation Characteristics in Polyimide (PI) Insulations under High-Frequency Electric Stress

Effect of Repetitive Square Voltage Frequency on Partial Discharge Features