Abstract:In the terahertz band, the vacuum electron devices with planar and miniaturized structures require the ultrahigh-precision description of high-density electron beams for formation and transportation with the theoretical analysis and simulation. Thus, the absence of the available theory for the sheet beam electron is put forward to investigate the 3-D spatial potential using a differential geometry and tensor analysis. The equation of electron beam potential can be derived by establishing a moving coordinate frame, carrying out the numerical calculations, and doing series expansion. To solve the complex sheet beam description of the existence of four corner singularities, the Riemann method and conformal mapping are adopted to overcome this difficulty. Then, a 0.22-THz vacuum electron tube using a sheet beam electron gun and corresponding optical system are designed. The beam voltage and current are 16.5 kV and 0.5 A, respectively, with a beam channel size of 1.4 mm mm and a uniform magnetic field of 5980G. With the 3-D simulation, the high-density sheet electron beam can transport 18 mm successfully. The spatial potential of numerical calculation with the obtained sheet beam theoretical function and the simulation model are compared to verify the theoretical description. Both the results are with good consistency, which preliminarily proves the effectiveness of the theoretical function. This work will give the deep physical mechanics vision for the development of high-power and high-efficiency sheet beam terahertz tube in the future.

Design of gridded sheet beam electron gun

Design of planar distributed three beam electron gun with narrow beam separation for W band staggered double vane TWT

Optimum Design of Electron Gun for 0.22-Thz Traveling Wave Tubes

Design and Experiment of a Sheet Beam Gun for Extended Interaction Oscillator

Design of Off-angle Beaming Device Based on Subwavelength Metal Thin Film Microstructure

Confined Focused Sheet Beam Flow of a Thermionic Linear Electron Source

Development of a High-Beam-Transparency Gridded Electron Gun Based on a Carbon Nanotube Cold Cathode

High Emission Current Density Electron Gun for a 263 GHz Sheet Beam Traveling Wave Tube

Design of a Sheet-Beam Electron Gun for a Ka-band Microfabricated Traveling-Wave Tube

A Sheet Beam Electron Gun Based on Carbon Nanotube Cold Cathode

The Design of High Energy Irradiation Electron Gun

A narrow sheet beam electron gun designed by approximate Pierce method for the millimeter wave TWT

Quasi-pierce angle focusing electrode for a w-band sheet beam gun

Design and Analysis of Electron Beam of 0.67 THz Traveling Wave Tube

Theoretical Analysis of Sheet Beam Electron Gun for Terahertz Vacuum Electron Devices

Design and numerical simulation of thermionic electron gun

Theoretical research and simulation on focusing sheet electron beam with periodic elliptical solenoid

Development of a High-Gradient X-band RF Gun with Replaceable Field Emission Cathodes for RF Breakdown Studies

Design and study of the shape parameters for the electrode plates of the electron gun in the four-dimensional transmission electron microscope

Design of uniform permanent magnet electronic optical system for 220 GHz sheet electron beam traveling wave tube

Beam and Image Experiment of Beam Deflection Electron Gun for Distributed X-ray Sources