Abstract:Developing microwave absorbing composites with lightweight and wide absorption bands is an essential direction for electromagnetic wave stealth and shielding application. In this article, PAN/PMMA blend fibers and sheath-core blend fibers with PAN/PMMA as the sheath and PMMA as the core were spun by uniaxial and coaxial electrostatic spinning, respectively. Porous carbon nanofiber (PCNF) and hollow porous carbon nanofiber (HPCNF) were obtained after pre-oxidation and carbonization of the corresponding two precursor fibers. The microwave absorption composite samples with PCNF and HPCNF as absorbents and paraffin as matrix were prepared, respectively. Their electromagnetic parameters were investigated by the reflective-transmission network parameter method. The microwave absorption properties of the corresponding composites were calculated based on a model for a single-layer planewave absorber from electromagnetic parameters. The results showed diversity between the microwave absorbing performance of the composites filled with PCNF and HPCNF. HPCNF performs better than PCNF as an absorbent; that is, the lowest reflection loss of composite filled with HPCNF is −20.26 dB and the effective bandwidth (lower than −10 dB) is to 4.56 GHz, while the lowest reflection loss of a composite filled with PCNF is −13.70 dB, and the effective bandwidth (lower than −10 dB) is 2.68 GHz when the absorbent content is 7%, and the thickness is 3 mm. Much lower reflection loss and a wider absorption band could be expected from HPCNF. The presence of a hollow structure in HPCNF, which may increase the degree of polarization and provide more interfaces for the interference phase extinction of reflected electromagnetic waves, might help to improve the attenuation of electromagnetic waves and broaden the absorption band.

Optimization of the Carbon Coating of Honeycomb Cores for Broadband Microwave Absorption

A Composite Absorber of FSS and Area-coated Honeycomb Using High-loss Materials for Broadband Applications

Design on the Microwave Absorber with Lattice of 3D Composite Element for X-band Application

Honeycomb-like bamboo powders-derived porous carbon with low filler loading, high-performance microwave absorption

Microwave-absorbing honeycomb core structure with nickel-coated glass fabric prepared by electroless plating

Achieving broad absorption bandwidth of the Co/carbon absorbers through the high-frequency structure simulator electromagnetic simulation

Effect of Low-Content Carbon Nanotubes on the Dielectric and Microwave Absorption Properties of Graphite/Polymer Nanocomposites

Designing Symmetric Gradient Honeycomb Structures with Carbon-Coated Iron-Based Composites for High-Efficiency Microwave Absorption

Constructing and Optimizing Epoxy Resin-based Carbon Nanotube/Barium Ferrite Microwave Absorbing Coating System

One-dimensional core–shell CoC@CoFe/C@PPy composites for high-efficiency microwave absorption

Sandwich nanoarchitectonics of heterogenous CB/CNTs honeycomb composite for impedance matching design and microwave absorption

Hierarchical Porous Carbon/Co Nanocomposites Derived from Biomass for High-Performance Microwave Absorption

A Study of the Nanocomposite Sandwich Structures for Broadband Microwave Absorption and Flexural Strength

Preparation of Hollow Porous Carbon Nanofibers and Their Performance and Mechanism of Broadband Microwave Absorption

CoFe2O4/porous Carbon Nanosheet Composites for Broadband Microwave Absorption

Optimized design, fabrication, and enhanced performance of honeycomb sandwich structure for excellent impact resistance and broadband microwave absorption

High-loading Magnetic Nanocrystals Well-Dispersed Onto Carbon Nanosheet Honeycombs As Ultralight and Broadband Microwave Absorbers

Ultra-wideband absorption of C/Co composites achieved through metamaterial-based design

Honey-comb Carbon Nanostructure Derived from Peach Gum to Yield High Microwave Absorption

Porous Carbon Polyhedrons Coupled with Bimetallic CoNi Alloys for Frequency Selective Wave Absorption at Ultralow Filler Loading

Frequency selective surface composites with honeycomb absorbing structure for broadband applications