Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. In order to verify the potential application of passive pre-combustion chamber technology in commercial GDI engines, the efficiency characteristics, combustion characteristics (CA50, Knock Index and COV) and emission characteristics of a pre-combustion chamber ignition engine in a boosted environment were studied by three-stage injection strategy to form a lean burn environment (λ = 1.3). A 3D simulation model of pre-combustion chamber ignition engine is established. Combined with the engine bench test results, the process of intake, mixture formation, combustion and emission generation under different working conditions is simulated by simulation method. The development process of TKE (turbulent kinetic energy), air-fuel ratio, temperature and combustion emissions in the main/pre-combustor is studied. It is found that under high load conditions in boosted pre-combustion chamber engine, the average knock index can be controlled between 2 and 3.4 bar, and the COV can be controlled between 3% and 3.5%. The indicated thermal efficiency reaches over 40% within the load range of IMEP from 10 to 14 bar. When the load increases, NOx and soot emissions show a downward trend, the HC and CO emissions slight increase. The pre-combustion chamber engine exhibits a tumble intake pattern around the cylinder axis perpendicular to the cylinder axis. The TKE reaches its maximum value 20 CAD before the top dead center and then rapidly decreases. The use of a three-injection strategy can form a uniform stratified mixture at the ignition moment. The fuel air equivalence ratio in the ignition area of the pre-combustion chamber is 0.8–0.9, slightly higher than the average fuel air equivalence ratio of 0.75.

A simulation study on the effects of chamber geometry on combustion and emission in a diesel engine

Numerical Simulation Of Re-Entrant Bowl Effects On Natural-Gas Spark-Ignition Operation

Numerical Simulation of Re-Entrant Bowl Effects on Natural Gas SI Operation

Effect of Piston Crevices on 3D Simulation of a Heavy-Duty Diesel Engine Retrofitted to Natural Gas Spark Ignition

Effect Of Piston Crevices On The Numerical Simulation Of A Heavy-Duty Diesel Engine Retrofitted To Natural-Gas Spark-Ignition Operation

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Effects of piston bowl geometry on combustion and emission characteristics of biodiesel fueled diesel engines

Design and Tests of a Combustion Chamber for an Electrically Controlled,single-Cylinder Diesel Engine

Effects of Combustion Chamber Necking Sizes on Combustion Process of Diesel Engine

Effect of pre-chamber fuel injection parameters and EGR on the combustion and emissions of a heavy-duty diesel engine

Experimental investigation of the influence of pre-chamber structural parameters on combustion and emission characteristics of a high compression ratio SI engine

Numerical Study of Soot Particles from Low Temperature Combustion of Engine Fueled with Diesel Fuel and Unsaturation Biodiesel Fuels

Combustion performance characteristics of double-layer diverging combustion chamber compared with re-entrant chamber and omega chamber

Numerical Investigation of the Effect of Injection Timing on the In-Cylinder Activity of a Gasoline Direct Injection Engine

Numerical Investigation of Pre-Chamber Jet Combustion in a Light-Duty Gasoline Engine

Simulation of In-Cylinder Radiative Heat Transfer of Diesel Engine with Monte-Carlo Method

Three-Dimensional Computational Fluid Dynamics Modeling of a 6V150 Diesel Engine

Three-Dimensional Computational Fluid Dynamics Modeling of the Combustion Process of a MAN L21/31 Marine Diesel Engine

Numerical Simulation on Quasi-Homogeneous Mixture Formation in Diesel Engines

On the optimization of the double-layer combustion chamber with and without EGR of a diesel engine

Experimental and simulation study on lean combustion characteristics of passive pre-combustion chamber ignition boosted GDI engine