Abstract:A double-stator swing rotating permanent magnet spherical motor (SR-PMSM) is designed, which can realize rotation, swing and spiral motion, and is used in the multi-degree-of-freedom motion fields of industrial robot joints, torque gyroscopes, panoramic photography tables and so on. The inner surface of the rotor of the motor is attached with cylindrical PM poles, and the outer surface is attached with trapezoidal PM poles. Cylindrical and trapezoidal PM poles are simple to manufacture, but the magnetic field model of a spherical motor with two kinds of PM poles is complex. Therefore, a magnetic field modelling method combining the geometric equivalence principle and analytical method is proposed. Using the method of shape approximation, according to the principle of equivalence, the key parameters of cylindrical PM poles and trapezoidal PM poles are replaced by the parameters of approximate dihedral PM poles in a spherical coordinate. Select the most suitable dihedral PM poles, establish the analytical model of the magnetic field in the spherical coordinate system and verify the analytical results by FEM method. A SR-PMSM motor with 6/4 pole (swing) and 12/10 pole (rotation) structure was assembled, and the experimental device was set up. The experimental results show that the experimental curve, analytical curve and FEM curve are in good agreement, which proves the accuracy of the equivalent model and is suitable for the magnetic field model of cylindrical and trapezoidal PM poles of the spherical motor. The research results of magnetic field lay a foundation for further analysis of the stator-rotor composite magnetic field considering cogging effect and edge effect, and analysis of load characteristics of the motor.

Design and Analysis of Permanent Magnetic Spherical Motor with Cylindrical Poles

An Analysis of the Two-Pole PM Spherical Motor and Its Magnetic Field

Optimized Design of High Torque Density Permanent Magnet Synchronous Motor with Halbach Magnet

Design and Analysis of a Linear-Rotary Permanent Magnet Motor with Orthogonal Windings

Analytical Modelling of No‐load Magnetic Field for Equivalent Poles of a New Type of Double‐stator PM Poles Spherical Motor

Design and Analysis of Double Stator Swing Rotating Permanent Magnet Spherical Motor

Modeling and Design of a 3-DOF Magnetic Bearing with Toroidal Radial Control Coils

Optimization and Analysis of Cogging Torque of Permanent Magnet Spherical Motor

Design and Analysis of a 500W 120000rpm High-Speed Permanent Magnet Motor

Analytical Calculation of Magnetic Field of Double‐stator Permanent Magnet Spherical Motor Considering Cogging Effect and Edge Effect

Torque Calculation of Permanent Magnet Spherical Motor Based on Virtual Work Method

Current Optimization of 3-DOF Permanent Magnet Spherical Motor

Design and Function Analysis of Multiphase PM Bearingless Motor with Single Set of Windings

Analysis and Implementation of a 3-DOF Deflection-Type PM Motor

Design of open-loop controller for permanent magnet spherical motor

Analysis of Magnetic Field and Torque Features of Improved Permanent Magnet Rotor Deflection Type Three-Degree-of-Freedom Motor

Design and modeling of a spherical actuator with three dimensional orientation measurement system

Design and Analysis of a Bearingless Doubly Salient Permanent Magnet Machine

Design and Analysis of Modulated Magnetic Pole for Dual Three-Phase Surface-Mounted Permanent Magnet Synchronous Motor

Dynamics analysis and electromagnetic characteristics calculation of permanent magnet 3-degree-of-freedom motor

Levitation Force Analysis for Spherical Permanent Magnet Bearingless Motor