Abstract:This paper investigates a low computational cost, super-resolution ultrasound imaging method that leverages the asymmetric vibration mode of CMUTs. Instead of focusing on the broadband received signal on the entire CMUT membrane, we utilize the differential signal received on the left and right part of the membrane obtained by a multi-electrode CMUT structure. The differential signal reflects the asymmetric vibration mode of the CMUT cell excited by the nonuniform acoustic pressure field impinging on the membrane, and has a resonant component in immersion. To improve the resolution, we propose an imaging method as follows: a set of manifold matrices of CMUT responses for multiple focal directions are constructed off-line with a grid of hypothetical point targets. During the subsequent imaging process, the array sequentially steers to multiple angles, and the amplitudes (weights) of all hypothetical targets at each angle are estimated in a maximum a posteriori (MAP) process with the manifold matrix corresponding to that angle. Then, the weight vector undergoes a directional pruning process to remove the false estimation at other angles caused by the side lobe energy. Ultrasound imaging simulation is performed on ring and linear arrays with a simulation program adapted with a multi-electrode CMUT structure capable of obtaining both average and differential received signals. Because the differential signals from all receiving channels form a more distinctive temporal pattern than the average signals, better MAP estimation results are expected than using the average signals. The imaging simulation shows that using differential signals alone or in combination with the average signals produces better lateral resolution than the traditional phased array or using the average signals alone. This study is an exploration into the potential benefits of asymmetric CMUT responses for super-resolution imaging.

Tiltable Ultrasonic Transducers: Concept, Beamforming Methods and Simulation

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Transformable Ultrasonic Array Transducer for Multiscale Imaging and Beamforming.

On the SH0 directivity of an array with flexible PZT transducers for beam steering control

Design and simulation of a 2-D array flexible ultrasound transducer system for tissue characterization – A pilot study

Phase-Optimized Multi-Step Phase Acoustic Metasurfaces for Arbitrary Multifocal Beamforming

Wide-Angle Beam Steering Based on an Active Conformal Metasurface Lens

Modeling and Optimization of CMUTs Arrays for Improved Transmission and Reception Performance in Immersion

Active Acoustic Metasurface: Complete Elimination of Grating Lobes for High-Quality Ultrasound Focusing and Controllable Steering

Super-resolution Imaging Using Multi- Electrode CMUTs: Theoretical Design and Simulation Using Point Targets

Reconfigurable ultrasound focusing effect through acoustic barriers

Investigation of an Active Focusing Planar Piezoelectric Ultrasonic Transducer

Oblique Point-Focusing Shear-Horizontal Guided-Wave Electromagnetic Acoustic Transducer with Variable PPM Spacing

Enhanced ultrasonic focusing and temperature elevation via a therapeutic ultrasonic transducer with sub-wavelength periodic structure

Design and micromanufacturing technologies of focused piezoelectric ultrasound transducers for biomedical applications

Broadband Three-Dimensional Focusing for an Ultrasound Scalpel at Megahertz Frequencies

A Collimated Focused Ultrasound Beam of High Acoustic Transmission and Minimum Diffraction Achieved by Using a Lens with Subwavelength Structures

Airy Beam-enabled Binary Acoustic Metasurfaces for Underwater Ultrasound Beam Manipulation

Numerical Modelling of Unilateral Point-Focusing Electromagnetic Acoustic Transducer with Experimental Validation

Transmission–reflection-integrated multifunctional metasurfaces for multiplexed acoustic wave manipulation

Ultrasound Autofocusing: Common Midpoint Phase Error Optimization via Differentiable Beamforming