Manipulator State Estimation with Low Cost Accelerometers and Gyroscopes

Philip Roan,Nikhil Deshpande,Yizhou Wang,Benjamin Pitzer

DOI: https://doi.org/10.1109/iros.2012.6385893

2012-01-01

Abstract:Robot manipulator designs are increasingly focused on low cost approaches, especially those envisioned for use in unstructured environments such as households, office spaces and hazardous environments. The cost of angular sensors varies based on the precision offered. For tasks in these environments, millimeter order manipulation errors are unlikely to cause drastic reduction in performance. In this paper, estimates the joint angles of a manipulator using low cost triaxial accelerometers by taking the difference between consecutive acceleration vectors. The accelerometer-based angle is compensated with a uniaxial gyroscope using a complementary filter to give robust measurements. Three compensation strategies are compared: complementary filter, time varying complementary filter, and extended Kalman filter. This sensor setup can also accurately track the joint angle even when the joint axis is parallel to gravity and the accelerometer data does not provide useful information. In order to analyze this strategy, accelerometers and gyroscopes were mounted on one arm of a PR2 robot. The arm was manually moved smoothly through different trajectories in its workspace while the joint angle readings from the on-board optical encoders were compared against the joint angle estimates from the accelerometers and gyroscopes. The low cost angle estimation strategy has a mean error 1.3° over the three joints estimated, resulting in mean end effector position errors of 6.1 mm or less. This system provides an effective angular measurement as an alternative to high precision encoders in low cost manipulators and as redundant measurements for safety in other manipulators.