Abstract:For dual-linear-motor-driven (DLMD) gantry systems widely used in industrial applications, the strong mechanical coupling usually makes it difficult to achieve both good tracking and smooth operation performance simultaneously. In most of the existing control schemes, only the pure motion synchronization is considered, which may produce large internal forces leading to performance degradation and control chattering/saturation. In this paper, an accurate MIMO mathematical model of a DLMD gantry including both the traditional linear motion and the previously ignored rotational motion around the mass center is given, leading to a better understanding of the mechanical coupling and the internal forces caused by the rotational dynamics. Additionally, some physical parameters in the rotational dynamics having significant influences on the synchronization performance are discussed (e.g., the actual centroid position essentially determines the proper thrusts assigned to two parallelmotors). An advanced synchronization control scheme is presented subsequently by directly considering the additive rotational dynamics and accurate parameter estimation (e.g., the actual centroid position), which not only synchronizes the motions of two parallel motors but also regulates the internal forces. The technique of integrated desired compensation direct/indirect adaptive robust control is applied to synthesize the synchronization controller for both accurate parameter estimation and a guaranteed robust performance to various uncertainties. Comparative experiments with previous control schemes show the effectiveness and better synchronization performance of the proposed method.

Application of Modified Model Predictive Control to a Gantry System

Robust Immersion and Invariance Adaptive Coordinated Control for a Class of Biaxial Gantry Systems

Advanced Synchronization Control of a Dual-Linear-Motor-Driven Gantry with Rotational Dynamics.

Nonlinear Controller For A Gantry Crane Based On Partial Feedback Linearization

A practical optimal controller for underactuated gantry crane systems

Modeling and Nonlinear Control of Gantry Crane Using Feedback Linearization Method

Optimal Composite Nonlinear Feedback Control for a Gantry Crane System

Modeling and H∞ Position Control of a Spreader in the Gantry Crane

Design Of A Nonlinear Controller For Gantry Crane Payload

Adaptive Robust Precision Motion Control of A High-Speed Industrial Gantry with Cogging Force Compensations

-Synthesis-Based Adaptive Robust Control of Linear Motor Driven Stages With High-Frequency Dynamics: A Case Study

Composite Adaptive Synchronous Control of Dual-Drive Gantry Stage with Load Movement

Dynamic analysis and control PID path of a model type gantry crane

Adaptive Iterative Learning Constrained Control for Linear Motor-Driven Gantry Stage with Fault-Tolerant Non-Repetitive Trajectory Tracking

Backstepping Boundary Control for a Class of Gantry Crane Systems

Coordinated Contouring Controller Design For An Industrial Biaxial Linear Motor Driven Gantry

Modeling and Synchronized Control of a Dual-Drive “Checkerboard” Gantry With Composite Adaptive Feedforward and RISE Feedback

Modeling and H_∞ control of a gantry robot

Robust sliding-mode control for a gantry crane system subject to external disturbance

Coordinated Adaptive Robust Contouring Controller Design for an Industrial Biaxial Precision Gantry

Adaptive Robust Synchronization Control of a Dual-Linear-Motor-Driven Gantry with Rotational Dynamics and Accurate Online Parameter Estimation