Abstract:This study presents a scroll expander modelling methodology for small scale power generation systems by combining scroll geometry and semi-empirical model. Although the semi-empirical model is quite popular, its dependence on several experimentally-determined scroll geometrical and operational parameters makes this approach inflexible for different capacities and operating conditions. Some studies have sought to improve its flexibility in terms of using different working fluids and more accurate empirical parameters, however, those improved models still depend on a considerable number of experimentally-obtained scroll parameters. Therefore, in this study, a practical methodology for a simpler semi-empirical model combined with the operational flexibility of the scroll geometry is presented. Firstly, the flow rates of mainstream and leakage flows are analysed, where a correlation between scroll clearance and pressure ratio is determined. Secondly, a simpler approach to the semi-empirical model of scroll expander is proposed, whereby dependent parameters have been reduced to two parameters by using scroll geometrical calculations. The model is further improved to predict the rotational speed and electricity output by considering the overall friction coefficient of the coupled expander-generator unit. The findings are then compared with the results of an experimental study. The results show that the effective clearance values between scrolls vary according to pressure ratios, increasing from 20μm to 34μm. Mass flow rate can be predicted within 10% deviation from the experimental results for the same inlet conditions and rotational speed at a transient state. Additionally, considering steady state conditions, modelling results show that the rotational speed and electricity output can also be predicted within 8% and 7.5% of deviation, respectively.

Feasibility Study on Recovering Exhaust Energy from a Vehicle Engine System by a Scroll Expander

Feasibility Study of A Scroll Expander for Recycling Low-Pressure Exhaust Gas Energy from A Vehicle Gasoline Engine System

Analysis of a 1 Kw Organic Rankine Cycle Using a Scroll Expander for Engine Coolant and Exhaust Heat Recovery

Investigation and Performance Study of A Dual-Source Chemisorption Power Generation Cycle Using Scroll Expander

Technical feasibility study of scroll-type rotary gasoline engine: A compact and efficient small-scale Humphrey cycle engine

Research on a Scroll Expander Used for Recovering Work in a Fuel Cell

Parametric study for small scale engine coolant and exhaust heat recovery system using different Organic Rankine cycle layouts

Conceptual Design and Optimization of Scramjet Engines Using the Exergy Method

Experimental Investigation on the Performance of the Scroll Expander under Various Driving Cycles

Simulation and Experiment Research on Wide Ranging Working Process of Scroll Expander Driven by Compressed Air

Experimental Investigation of a Scroll Expander for Power Generation Part of a Resorption Cogeneration

Research on the performance characteristics of an oil-free scroll expander that is applied to a micro-scale compressed air energy storage system

Vehicle Exhaust Gas Treatment And Energy Recovery And Utilization Device Based On Turbine Dynamic And Static Cascade

Design and Dynamic Analysis of a Novel Scroll Compressor-Expander Unit for the CO2 Air Conditioning System in Electric Vehicles

Development and performance evaluation of a comprehensive automotive energy recovery system with a refined energy management strategy

Simulation and Experiment Study on Scroll Expander Used in Low Temperature Heat Recover System

Residual Heat Recovery System of Automotive Exhaust Based on Accumulator Principle

Energy recovery in automotive systems: A review of regenerative braking, flywheel, thermoelectric, rankin cycle and electric turbo compound

Recent Development in the Research of Energy Utilization Efficiency for Vehicle Engines

Theoretical and Experimental Research on Scroll Expander Used in Small-Scale Organic Rankine Cycle System

Evaluate the validity of the empirical correlations of clearance and friction coefficients to improve a scroll expander semi-empirical model