Abstract:Multiprocessor systems-on-chip show a trend toward integration of tens and hundreds of processor cores on a single chip. With the development of silicon photonics for short-haul optical communication, wavelength division multiplexing (WDM)-based optical networks-on-chip (ONoCs) are emerging on-chip communication architectures that can potentially offer high bandwidth and power efficiency. Thermal sensitivity of photonic devices is one of the main concerns about the on-chip optical interconnects. We systematically modeled thermal effects in optical links in WDM-based ONoCs. Based on the proposed thermal models, we developed OTemp, an optical thermal effect modeling platform for optical links in both WDM-based ONoCs and single-wavelength ONoCs. OTemp can be used to simulate the power consumption as well as optical power loss for optical links under temperature variations. We use case studies to quantitatively analyze the worst-case power consumption for one wavelength in an eight-wavelength WDM-based optical link under different configurations of low-temperature-dependence techniques. Results show that the worst-case power consumption increases dramatically with on-chip temperature variations. Thermal-based adjustment and optimal device settings can help reduce power consumption under temperature variations. Assume that off-chip vertical-cavity surface-emitting lasers are used as the laser source with WDM channel spacing of 1 nm, if we use thermal-based adjustment with guard rings for channel remapping, the worst-case total power consumption is 6.7 pJ/bit under the maximum temperature variation of 60 °C; larger channel spacing would result in a larger worst-case power consumption in this case. If we use thermal-based adjustment without channel remapping, the worst-case total power consumption is around 9.8 pJ/bit under the maximum temperature variation of 60 °C; in this case, the worst-case power consumption would benefit from a larger channel spacing.

Thermal analysis for 3D optical network-on-chip based on a novel low-cost 6×6 optical router

Thermal-Aware Placement And Routing For 3d Optical Networks-On-Chips

A thermal-sensitive design of a 3D torus-based optical NoC architecture

Thermal-sensitive Design and Power Optimization for a 3D Torus-Based Optical NoC

Modeling and Analysis of Thermal Effects in Optical Networks-on-Chip

3-D Mesh-Based Optical Network-on-Chip for Multiprocessor System-on-Chip

System-Level Modeling and Analysis of Thermal Effects in Optical Networks-on-Chip

Thermal-Aware Design and Simulation Approach for Optical NoCs

The Performance Analysis of Thermal Effect in Mesh-Based Optical Networks-on-Chips

A novel micro-ring-based 4 × 4 non-blocking silicon optical router

Holistic Comparison of Optical Routers for Chip Multiprocessors

A Learning-Based Thermal-Sensitive Power Optimization Approach for Optical NoCs

A Study on Thermal Impacts of Routing Algorithms for 3D Mesh-Based Network-on-chip

Work-in-Progress: Communication Optimization for Thermal Reliable Optical Network-on-Chip

A Novel Virtual-Cluster Based Architecture of Double-Layer Optical Networks-on-Chip

A Generic Optical Router Design for Photonic Network-on-Chips

On a Scalable, Non-Blocking Optical Router for Photonic Networks-on-Chip Designs

Hardware-Software Collaborative Thermal Sensing in Optical Network-on-Chip-based Manycore Systems

An Efficient Branch-and-Bound Routing Algorithm for Optical NoCs

Ant Colony Optimization-Based Thermal-Aware Adaptive Routing Mechanism for Optical NoCs

Thermal Aware Design Method for VCSEL-Based On-Chip Optical Interconnect