Abstract:In this paper, a dynamic method, which includes a coupled dynamic model of full-hole drill string and its numerical implementation approach, is developed to analyze the post buckling of drill string in vertical wells. The coupled dynamic model is established based on Lagrange's equations and finite difference method. Its numerical implementation approach is achieved by using the direct integration method and Rayleigh damping formula. Especially the developed dynamic method is able to consider the coupling of axial vibration, lateral vibration, torsional vibration and the effects of rotating speed, damping from the drilling fluid, the discontinuous contact and friction between drill string and borehole, which enable it to predict the post bucking behaviors of drill string in vertical wells more efficiently and accurately. The developed dynamic method is validated by the comparison with the static theoretical solution of drill string, and then it is used to calculate the dynamic post buckling of drill string in vertical wells. The calculation results show that the contact length increases with the increase of the friction coefficient when the weight on bit is stable. There are critical speeds to make the contact length take the extreme value, and the critical speeds vary with the change of weight on bit and drill string length. The increase of drill string length does not change the quasi-static contact length, but will make the dynamic contact length fluctuate greatly. The fluctuation of weight on bit and torque on bit make the contact length fluctuate near the quasi-static contact length under most weight on bit. This work provides important theoretical and technical support for the comprehensive analysis of the dynamic buckling characteristics of drill string in vertical wells.

Dynamic Assessment of the Carrying Capacity of Oilfield Derricks

Dynamic Analysis of Pipeline Lifting Operations for Different Current Velocities and Wave Heights

Strength Analysis of a Certain 350 ft Jack-up Offshore Platform Jacking System in Emergency Lifting Process under Different Working Conditions

Strength Check and Stress Test for Hoisting Mechanism of the 1300t Box-type Derrick Floating Crane

Dynamic Behaviour of Oilfield ‘A’ Form Derricks

Dynamic evaluation for simply supported reinforced concrete beam with considering the influence of overload

Dynamic Response Analysis of Deployable Lifting Construction Process of Reticulated Shell Structures

Nonlinear Finite Elment Analysis On The Loading Behavior Of Tower Type Oiling Derrick

Applicability of Effective Tangent Modulus Method in Evaluation of Buckling Strength of Long-Span Cable-Stayed Bridges

Simulation of impact load on ship-platform collision

NONLINEAR ANALYSIS OF THE MECHANICAL BEHAVIOUR OF OIL DERRICK STEEL STRUCTURES

Double Nonlinear Analysis of the Loading Capacity of Drilling Derrick Steel Structures Containing Defects and Defacements

Dynamic model test on monopile for offshore wind turbine under jointed lateral environmental load and seismic load

Dynamic Responses of Jacket Foundation Offshore Wind Turbine Considering the Cyclic Loading Effects

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

A dynamic method for post buckling analysis of drill string in vertical wells

Model Tests on Jacking Installation and Lateral Loading Performance of Jacket Foundation in Sand

Model Tests on the Long-Term Dynamic Performance of Offshore Wind Turbines Founded on Monopiles in Sand

Loading Methodology and Dynamics Analysis of the Digital-Servo Hydraulic Cylinders Group in Large Wind Turbine Drivetrain Test Bench

Analysis of dynamic reliability of offshore jacket platforms subjected to seismic action

Dynamic Behavior of Piled Jacket Offshore Wind Turbines Based on Integrated Aero-Servo-hydro-ssi-owt Model