Abstract:Steam discharged into subcooled water is investigated experimentally to demonstrate the direct contact condensation phenomena in nuclear reactor safety system and underwater propulsion apparatus. The steam jet condenses to various shapes at different thermal hydraulic conditions. A condensation regime diagram is drawn to classify the regime for different flow patterns, among which there are three typical shapes of steam plume characterizing the chugging, condensation oscillation, stable condensation regime (Figure 1). The flow region can be separated into three parts—vapor, water and two-phase regions, and the white patch in the image indicating the two-phase region is a mixture of condensed vapor and subcooled water. Three typical stages of bubble motions—growth (subimage 1 to 6, Figure 2), necking (subimage 7 to 10, Figure 2), and detachment (subimage 11 to 13, Figure 2)—are demonstrated. The bubble diameter reaches the maximum at the necking stage and remains approximately invariant with the connecting neck prolonging for a period. A series of sequent photos exhibits shape transformations at the stable condensation regime, implying that the steam plume grows and shortens periodically due to comprehensive effects of injection, viscosity damping and condensation (Figure 3). The dimensionless penetration length, defined as the ratio of penetration length to nozzle diameter, is in the range of 8.23–11.67 in the Figure 3. The majority of previous literatures present the average dimensionless penetration length which is closely related with time-averaged heat transfer characteristic. However, variations of steam plume are proven to account for pressure oscillation phenomena by the transient visualization investigations, in which the first dominant frequency acquired from the FFT domain graph of pressure signal is consistent with the period of steam plume variations. The second dominant frequency is verified to be caused by oscillations of detached bubbles (subimage 8 and 9, Figure 3) in the research.

Condensation-induced Steam Bubble Collapse in a Pipeline

Steam Bubble Collapse of Thermal Pipeline in Nuclear Power Plant

Experimental Investigation on the Phenomenon of Steam Condensation Induced Water Hammer in a Horizontal Pipe

Theoretical and Numerical Studies on the Bubble Collapse in Water

Experimental Transient Cavitation Bubbles in a Conical-Frustum Shaped Tube

Numerical Study on Mechanism of Condensation Oscillation of Unstable Steam Jet

Characteristics of Entrapped Bubbles of Periodic Condensation-Induced Water Hammer in a Horizontal Pipe

Numerical Simulation of Condensation-Induced Water-Hammer

Flow Visualization of Submerged Steam Jet in Subcooled Water

A study of the numerical simulation of water hammer with column separation and cavity collapse in pipelines

Experimental Study on Condensation of Steam Jet Injection in Submerged Condition

Experimental Study on Bubble Collapse Near a Solid Boundary

Submerged Injection of Gas into a Thin Liquid Sheet

A numerical study on oscillatory characteristics of unstable steam jet in water flow within a vertical pipe

Experimental Investigation on the Interface Shape of Bubble Condensation for Vertical Upward Steam Jet at Low Mass Flux

Theoretical Analysis on Bubble Radius and Pressure Fluctuation During Steam Bubble Condensation

Simulation of Vapor Bubble Collapsing Near or On Wall in Stationary Water or High Speed Water

Experimental Investigation on the Condensation Patterns and Pressure Oscillation Characteristics of Steam Submerged Jet Through a Horizontal Pipe at Low Steam Mass Flux

Numerical Investigation on Thermal Hydraulic Characteristics of Steam Jet Condensation in Subcooled Water Flow in Pipes

An Experimental Study on the Water Hammer with Cavity Collapse under Multiple Interruptions

Numerical Simulation of the Collapse of a Bubble Near the Rigid Wall