Abstract:Mobile robotic drilling for flight control surface assembly at multiple stations demands high positioning accuracy of the equipped industrial robot. However, disturbances, arising from movement from station to station, significantly deteriorate the positioning accuracy. This paper proposes a novel in-process robot base frame calibration method with a 2D vision system. A proposal layout of flight control surface assembly, the developed mobile robotic drilling system, and the 2D vision system are first introduced. Then an iterative measurement scheme is proposed to eliminate measurement errors induced by non-perpendicularity and erroneous object distance during 2D vision-based positioning of preset reference holes. In order to obtain the third-dimension Cartesian coordinates of the reference holes, depth control with autofocus is achieved by using a new sharpness function. Based on the acquired Cartesian coordinates of the reference holes in the robot base frame, and their counterparts measured in advance in the world coordinate system, the description of the robot base frame with respect to the world coordinate system can be obtained with least-squares fitting. Numerical experiments show that depth control with autofocus contributes to enhanced accuracy of robot base frame calibration. Experiments performed on the developed mobile drilling system indicate that the maximum positioning error is about 0.6 mm with the proposed calibration method. Since position errors of drilled fastener holes will be further measured and compensated for based on the 2D vision system, the proposed in-process robot base frame calibration method is effective.

Planar Motion Tracking with an Uncalibrated Robot/vision Vision System

Simultaneous Tracking and Regulation Visual Servoing of Wheeled Mobile Robots with Uncalibrated Extrinsic Parameters

Moving Object Tracking Research Based on Active Vision

An Optimization Based Vision Calibration Method for PTZ Camera's Errors in Model and Execution

Robot Base Frame Calibration with a 2D Vision System for Mobile Robotic Drilling

Vision-based Adaptive Tracking Control of Uncertain Nonholonomic Mobile Robots

Vision-based robotic tracking of moving object with dynamic uncertainty

UNCALIBRATED 3D ROBOTIC VISUAL TRACKING BASED ON STEREO VISION

Uncalibrated Dynamic Eye-in-hand Visual Tracking of Robots by Observing Unknown Static Objects

Visual Tracking of Robots in Uncalibrated Environments

Visual Tracking Control for an Uncalibrated Robot System with Unknown Camera Parameters

UNCALIBRATED 2D ROBOTIC VISUAL TRACKING BASED ON ARTIFICIAL NEURAL NETWORK

Dynamic Visual Tracking for Manipulators Using an Uncalibrated Fixed Camera

Nonlinear Visual Mapping Model for 3-D Visual Tracking with Uncalibrated Eye-in-hand Robotic System.

A novel multidimensional uncalibration method applied to six-axis manipulators

Visual servoing of robots with uncalibrated robot and camera parameters

Visual Servoing with an Uncalibrated Eye-in-hand Camera

Dynamic grasp and trajectory planning for moving objects

Uncalibrated Visual Tracking Control Without Visual Velocity.

Automated tracking and grasping of a moving object with a robotic hand-eye system

Unified Visual Servoing Tracking and Regulation of Wheeled Mobile Robots With an Uncalibrated Camera