Abstract:This article presents a comprehensive study on shorted dipole antennas aiming for low-cost radio frequency identification (RFID) reader applications. Starting from a low-profile shorted bowtie dipole antenna, it is found that by varying the shorting wall position, three different types of resonant antennas could be realized with different radiation features. A low-profile planar inverted F antenna (PIFA) -type dipole is obtained by moving the shorting wall toward the feeding, which exhibits a low resonance frequency without obvious back lobe radiation or sidelobes. When the shorting wall is placed in the middle of the radiating patch, a mushroom-type dipole antenna can be built. A zeroth-order mode is also observed. This structure differs from the magnetoelectric dipole due to a low-profile structure. Placing the wall toward the end of the dipole arm leads to a loop-type antenna with a broader beam and a reduced gain. It also shifts the resonance toward the higher frequency. Based on the PIFA- and mushroom-type structures, two circularly polarized antennas with crossed shorted dipoles are designed and investigated carefully. Finally, two optimized, compact, and low-cost RFID reader antennas based on simple metal stamping process and screws are designed, fabricated, and tested, showing an excellent RF reading range. This study demonstrates that for the shorted dipole antennas, miniaturization and bandwidth control can be achieved simultaneously. Particularly, for higher gain and smaller size, the shorting wall should be placed close to the feeding to suppress the loop mode. For omnidirectional radiation, the loop mode should be enhanced by moving the shorting wall close to the end of the dipole arm.

Design and Comparison Between Two General Purpose Dipole Type UHF RFID Tag Antennas

Dual-Dipole Uhf Rfid Tag Antenna with Quasi-Isotropic Patterns Based on Four-Axis Reflection Symmetry

Three to Two Curve Fractal Folded Dipole Antenna for Rfid Application

Effects of Different Attaching Positions of Human Body on Wearable Tag Antenna

A novel printed folded dipole antenna used for modern RFID system

Design and Rfid Signal Analysis of A Meander Line Uhf Rfid Tag Antenna

Bending Effect on Antenna with Radiation Performance for Electronic Tag

Performance of RFID bowtie tag antenna with different impedance matching

Analysis of Dipole-Like Ultra High Frequency Rfid Tags Close to Metallic Surfaces

A Miniaturized 2.45ghz RFID Tag Antenna Using Planar

A single port dipole for UHF RFID tag antennas with eliminated read-orientation sensitivity

Design and Radiation Mechanism Analysis of a Multi‐usage Ultra‐high Frequency Radio Frequency Identification Tag Antenna

A Low-Profile Metal-backed Dipole Loaded with Closely Coupled Arc-shaped Open Stubs for On-metal Tag Design with Wide Frequency Tuning Capability

Novel Concentric Hexagonal-Shaped RFID Tag Antenna with T-Shaped Stub Matching

Analysis of Bow Tie Array RFID Tag Antenna for Paper Reel Identification Systems

Design And Analysis Of Efficient And Compact Antenna For Paper Based Uhf Rfid Tags

The Influence of the Design of Antenna and Chip Coupling Circuits on the Performance of Textronic RFID UHF Transponders

Characterization of Shorted Dipole Antennas for Low-Cost RFID Reader Applications

Low Cost Paper Based Bowtie Tag Antenna for High Performance UHF RFID Applications

Design and Analysis of UHF RFID Tag Antenna on the Surface of Cylinder

A MINIATURIZED PRINTED DIPOLE ANTENNA WITH V-SHAPED GROUND FOR 2.45 GHZ RFID READERS