Abstract:Objective.Retinal prosthetics offer partial restoration of sight to patients blinded by retinal degenerative diseases through electrical stimulation of the remaining neurons. Decreasing the pixel size enables increasing prosthetic visual acuity, as demonstrated in animal models of retinal degeneration. However, scaling down the size of planar pixels is limited by the reduced penetration depth of the electric field in tissue. We investigated 3-dimensional (3d) structures on top of photovoltaic arrays for enhanced penetration of the electric field, permitting higher resolution implants.Approach.3D COMSOL models of subretinal photovoltaic arrays were developed to accurately quantify the electrodynamics during stimulation and verified through comparison to flat photovoltaic arrays. Models were applied to optimize the design of 3D electrode structures (pillars and honeycombs). Return electrodes on honeycomb walls vertically align the electric field with bipolar cells for optimal stimulation. Pillars elevate the active electrode, thus improving proximity to target neurons. The optimized 3D structures were electroplated onto existing flat subretinal prostheses.Main results.Simulations demonstrate that despite exposed conductive sidewalls, charge mostly flows via high-capacitance sputtered iridium oxide films topping the 3D structures. The 24μm height of honeycomb structures was optimized for integration with the inner nuclear layer cells in the rat retina, whilst 35μm tall pillars were optimized for penetrating the debris layer in human patients. Implantation of released 3D arrays demonstrates mechanical robustness, with histology demonstrating successful integration of 3D structures with the rat retinain-vivo.Significance. Electroplated 3D honeycomb structures produce vertically oriented electric fields, providing low stimulation thresholds, high spatial resolution, and high contrast for pixel sizes down to 20μm. Pillar electrodes offer an alternative for extending past the debris layer. Electroplating of 3D structures is compatible with the fabrication process of flat photovoltaic arrays, enabling much more efficient retinal stimulation.

Towards a Modular 32 x 32 Pixel Stimulator for Retinal Prosthesis

Architecture Tradeoffs In High Density Microstimulators For Retinal Prosthesis

A 4.49nW/Pixel Light-to-Stimulus Duration Converter-Based Retinal Prosthesis Chip

Challenges in System and Circuit Design for High Density Retinal Prosthesis

Implantable CMOS Neuro-Stimulus Chip for Visual Prosthesis

Design of a Hippocampal Cognitive Prosthesis Chip

Challenges Insystemandcircuit Design Forhighdensity Retinal Prosthesis

Monolithic neuro-Stimulus chip for retinal implants

Vertical-junction photodiodes for smaller pixels in retinal prostheses

Electronic Visual Prosthesis

Development Of Flexible Stimulation Devices For Vision Prosthesis

CMOS chip for subretinal artificial visual function recovery

Design of Artificial Retinal Transducer System Based on MEMS Technology

Implantable Biomimetic Microelectronic Systems Design

Photovoltaic implant simulator reveals resolution limits in subretinal prosthesis

A Sub-mm 3 Wireless Neural Stimulator IC for Visual Cortical Prosthesis With Optical Power Harvesting and 7.5-kb/s Data Telemetry

Feasibility Assessment of an Optically Powered Digital Retinal Prosthesis Architecture for Retinal Ganglion Cell Stimulation

Subretinal implanting micro-chips for vision prosthesis

Demonstration of multi-point stimulation with AC-driven CMOS chips for retinal prosthesis

Three-dimensional electro-neural interfaces electroplated on subretinal prostheses

Micro-stimulator Design for Visual Prosthesis Based on Optic Nerve Stimulation